summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
diff options
context:
space:
mode:
authorStefan Wahren <stefan.wahren@i2se.com>2018-04-21 14:28:35 +0300
committerEric Anholt <eric@anholt.net>2018-04-23 23:03:13 +0300
commitb1b8f45b3130dbd8704e5ea0d82b49b1d929498e (patch)
tree9d92aee938b3b1b3c1766ff6e78a2b2dfb79069c /arch/arm/boot/dts/bcm2837-rpi-3-b.dts
parentc4bb97821744b02e04be2744c1a726e2a21e7779 (diff)
downloadlinux-b1b8f45b3130dbd8704e5ea0d82b49b1d929498e.tar.xz
ARM: dts: bcm2837: Add missing GPIOs of Expander
After commit a98d90e7d588 ("gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service") we are able to control the rest of the GPIOs of the RPi 3. So add all the missing parts (ACT LED, Wifi & BT control, HDMI detect) to the DT. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
Diffstat (limited to 'arch/arm/boot/dts/bcm2837-rpi-3-b.dts')
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-b.dts20
1 files changed, 19 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index cc39b6f8d6a5..c318bcbc6ba7 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -20,9 +20,14 @@
leds {
act {
- gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+ gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
};
};
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
+ };
};
&firmware {
@@ -48,6 +53,10 @@
status = "okay";
};
+&hdmi {
+ hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
+};
+
/* uart0 communicates with the BT module */
&uart0 {
pinctrl-names = "default";
@@ -57,6 +66,7 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <2000000>;
+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
};
};
@@ -69,11 +79,19 @@
/* SDHCI is used to control the SDIO for wireless */
&sdhci {
+ #address-cells = <1>;
+ #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio34>;
status = "okay";
bus-width = <4>;
non-removable;
+ mmc-pwrseq = <&wifi_pwrseq>;
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
};
/* SDHOST is used to drive the SD card */