summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/dm816x.dtsi
diff options
context:
space:
mode:
authorTony Lindgren <tony@atomide.com>2015-02-24 19:48:52 +0300
committerTony Lindgren <tony@atomide.com>2015-02-24 19:48:52 +0300
commita54879a0085993c06be5630321d962d6b48e134f (patch)
tree043259ad5445c7f2c6fcec9f708dbb40e5815473 /arch/arm/boot/dts/dm816x.dtsi
parenta0182724abd82ad90e0312db0da60a2f2d0442f1 (diff)
downloadlinux-a54879a0085993c06be5630321d962d6b48e134f.tar.xz
ARM: dts: Fix USB dts configuration for dm816x
Commit 7800064ba507 ("ARM: dts: Add basic dm816x device tree configuration") added basic devices for dm816x, but I was not able to test the USB completely because of an unconfigured USB phy, and I only tested it to make sure the Mentor chips are detected and clocked without a phy. After testing the USB with actual devices I noticed a few issues that should be fixed to avoid confusion: - The USB id pin on dm8168-evm is hardwired and can be changed only by software. As there are two USB-A type connectors, let's start both in host mode instead of otg. - The Mentor core is configured in such a way on dm8168-evm that it's not capable of multipoint at least on revision c board that I have. - We need ranges for the syscon to properly set up the phy as children of the SCM syscon area. - Let's not disable the second interface, the board specific dts files can do that if really needed. Most boards should just keep it enabled to ensure the device is idled properly. Note that also a phy and several musb fixes are still needed to make the USB to work properly in addition to this fix. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/boot/dts/dm816x.dtsi')
-rw-r--r--arch/arm/boot/dts/dm816x.dtsi34
1 files changed, 30 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index d98d0f7de380..3c97b5f2addc 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -97,10 +97,31 @@
/* Device Configuration Registers */
scm_conf: syscon@600 {
- compatible = "syscon";
+ compatible = "syscon", "simple-bus";
reg = <0x600 0x110>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x600 0x110>;
+
+ usb_phy0: usb-phy@20 {
+ compatible = "ti,dm8168-usb-phy";
+ reg = <0x20 0x8>;
+ reg-names = "phy";
+ clocks = <&main_fapll 6>;
+ clock-names = "refclk";
+ #phy-cells = <0>;
+ syscon = <&scm_conf>;
+ };
+
+ usb_phy1: usb-phy@28 {
+ compatible = "ti,dm8168-usb-phy";
+ reg = <0x28 0x8>;
+ reg-names = "phy";
+ clocks = <&main_fapll 6>;
+ clock-names = "refclk";
+ #phy-cells = <0>;
+ syscon = <&scm_conf>;
+ };
};
scrm_clocks: clocks {
@@ -357,7 +378,10 @@
reg-names = "mc", "control";
interrupts = <18>;
interrupt-names = "mc";
- dr_mode = "otg";
+ dr_mode = "host";
+ interface-type = <0>;
+ phys = <&usb_phy0>;
+ phy-names = "usb2-phy";
mentor,multipoint = <1>;
mentor,num-eps = <16>;
mentor,ram-bits = <12>;
@@ -366,13 +390,15 @@
usb1: usb@47401800 {
compatible = "ti,musb-am33xx";
- status = "disabled";
reg = <0x47401c00 0x400
0x47401800 0x200>;
reg-names = "mc", "control";
interrupts = <19>;
interrupt-names = "mc";
- dr_mode = "otg";
+ dr_mode = "host";
+ interface-type = <0>;
+ phys = <&usb_phy1>;
+ phy-names = "usb2-phy";
mentor,multipoint = <1>;
mentor,num-eps = <16>;
mentor,ram-bits = <12>;