summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/exynos4412-trats2.dts
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2017-10-20 01:24:24 +0300
committerArnd Bergmann <arnd@arndb.de>2017-10-20 01:38:51 +0300
commit061ae53266135c90e9a593dde6e6c34cb8b8e396 (patch)
tree8806f033949b475152af7914b9b148b6ea778578 /arch/arm/boot/dts/exynos4412-trats2.dts
parentb073a8991f52e516092a48c90baf9d478f84066c (diff)
parent3991e054832e52119b238b397e5e510d7fee5bb4 (diff)
downloadlinux-061ae53266135c90e9a593dde6e6c34cb8b8e396.tar.xz
Merge tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc
Pull "Samsung DTS ARM changes for 4.15" from Krzysztof Kozłowski: 1. Add new board: Hardkernel Odroid HC1. 2. Fix incomplete Odroid-XU3/4 thermal-zones definition leading to possible overheat if first pair of A7+A15 cores is idle but rest of CPUs are busy. 3. Add capacity-dmips-mhz properties for CPUs of octa-core SoCs. 4. Add power button to Odroid XU3/4. 5. Improvements in Gscaler, HDMI and Mixer blocks on Exynos5. 6. Add suspend quirk to DWC3 USB controller to fix enumeration of SuperSpeed devices on Odroid XU4. 7. Add HDMI and MHL to Trats2. 8. Cleanups (redundant properties and nodes). * tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: dt-bindings: samsung: Document binding for new Odroid HC1 board ARM: dts: exynos: Add HDMI and Sil9234 to Trats2 board ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board ARM: dts: exynos: Move audio clocks configuration to odroidxu3-audio.dtsi ARM: dts: exynos: Add dwc3 SUSPHY quirk ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes ARM: dts: exynos: Add status property to Exynos 5250 HDMI and Mixer nodes ARM: dts: exynos: Cleanup HDMI DCC definitions on Exynos5250 and Exynos542x boards ARM: dts: exynos: Move HDMI PHY node from boards to exynos5250.dtsi ARM: dts: exynos: Use specific compatibles for proper Gscaler limits on Exynos5250 and Exynos5420 ARM: dts: exynos: Remove redundant interrupt properties in gpio-keys on Odroid boards ARM: dts: exynos: Add power button for Odroid XU3/4 ARM: dts: exynos: Remove the display-timing and delay from Rinato ARM: dts: exynos: add exynos5422 cpu capacity-dmips-mhz information ARM: dts: exynos: add exynos5420 cpu capacity-dmips-mhz information ARM: dts: exynos: fix incomplete Odroid-XU3/4 thermal-zones definition
Diffstat (limited to 'arch/arm/boot/dts/exynos4412-trats2.dts')
-rw-r--r--arch/arm/boot/dts/exynos4412-trats2.dts111
1 files changed, 111 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index d867888e7b35..220cdf109405 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -18,6 +18,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/pinctrl/samsung.h>
/ {
model = "Samsung Trats 2 based on Exynos4412";
@@ -97,6 +98,34 @@
gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ vsil12: voltage-regulator-6 {
+ compatible = "regulator-fixed";
+ regulator-name = "VSIL_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&buck7_reg>;
+ };
+
+ vcc33mhl: voltage-regulator-7 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3.3_MHL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc18mhl: voltage-regulator-8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8_MHL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
gpio-keys {
@@ -229,6 +258,36 @@
};
};
+ i2c-mhl {
+ compatible = "i2c-gpio";
+ gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&i2c_mhl_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ sii9234: hdmi-bridge@39 {
+ compatible = "sil,sii9234";
+ avcc33-supply = <&vcc33mhl>;
+ iovcc18-supply = <&vcc18mhl>;
+ avcc12-supply = <&vsil12>;
+ cvcc12-supply = <&vsil12>;
+ reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpf3>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x39>;
+
+ port {
+ mhl_to_hdmi: endpoint {
+ remote-endpoint = <&hdmi_to_mhl>;
+ };
+ };
+ };
+ };
+
camera: camera {
pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
pinctrl-names = "default";
@@ -501,6 +560,29 @@
status = "okay";
};
+&hdmi {
+ hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd>;
+ vdd-supply = <&ldo3_reg>;
+ vdd_osc-supply = <&ldo4_reg>;
+ vdd_pll-supply = <&ldo3_reg>;
+ ddc = <&i2c_5>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ hdmi_to_mhl: endpoint {
+ remote-endpoint = <&mhl_to_hdmi>;
+ };
+ };
+ };
+};
+
&hsotg {
vusb_d-supply = <&ldo15_reg>;
vusb_a-supply = <&ldo12_reg>;
@@ -579,6 +661,10 @@
};
};
+&i2c_5 {
+ status = "okay";
+};
+
&i2c_7 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
@@ -873,12 +959,20 @@
};
};
+&i2c_8 {
+ status = "okay";
+};
+
&i2s0 {
pinctrl-0 = <&i2s0_bus>;
pinctrl-names = "default";
status = "okay";
};
+&mixer {
+ status = "okay";
+};
+
&mshc_0 {
broken-cd;
non-removable;
@@ -904,6 +998,18 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
+ mhl_int: mhl-int {
+ samsung,pins = "gpf3-5";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ i2c_mhl_bus: i2c-mhl-bus {
+ samsung,pins = "gpf0-4", "gpf0-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
sleep0: sleep-states {
PIN_SLP(gpa0-0, INPUT, NONE);
PIN_SLP(gpa0-1, OUT0, NONE);
@@ -1007,6 +1113,11 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
+ hdmi_hpd: hdmi-hpd {
+ samsung,pins = "gpx3-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
sleep1: sleep-states {
PIN_SLP(gpk0-0, PREV, NONE);
PIN_SLP(gpk0-1, PREV, NONE);