diff options
author | Simon Shields <simon@lineageos.org> | 2018-02-18 16:41:22 +0300 |
---|---|---|
committer | Krzysztof Kozlowski <krzk@kernel.org> | 2018-02-19 19:51:32 +0300 |
commit | c769eaf7a85d43d6a57179f3ece31661d1f7caba (patch) | |
tree | 11d4d9eac7c65ac258956195a0e27b4136f866ca /arch/arm/boot/dts/exynos4412-trats2.dts | |
parent | cd6f55457eb449a388e793abd676e3a5b73510bc (diff) | |
download | linux-c769eaf7a85d43d6a57179f3ece31661d1f7caba.tar.xz |
ARM: dts: exynos: Split Trats2 DTS in preparation for Midas boards
The Midas boards share a lot with Trats2. Split the common parts
out of Trats2 into a common Midas DTSI and a common "Galaxy S3" DTS.
Signed-off-by: Simon Shields <simon@lineageos.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/exynos4412-trats2.dts')
-rw-r--r-- | arch/arm/boot/dts/exynos4412-trats2.dts | 1388 |
1 files changed, 2 insertions, 1386 deletions
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 95b638fd281f..327ee980d3a5 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -10,23 +10,11 @@ */ /dts-v1/; -#include "exynos4412.dtsi" -#include "exynos4412-ppmu-common.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clock/maxim,max77686.h> -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos4412-galaxy-s3.dtsi" / { model = "Samsung Trats 2 based on Exynos4412"; - compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4"; - - aliases { - i2c9 = &i2c_ak8975; - i2c10 = &i2c_cm36651; - i2c11 = &i2c_max77693; - i2c12 = &i2c_max77693_fuel; - }; + compatible = "samsung,trats2", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; memory@40000000 { device_type = "memory"; @@ -35,1377 +23,5 @@ chosen { bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; - stdout-path = &serial_2; - }; - - firmware@204f000 { - compatible = "samsung,secure-firmware"; - reg = <0x0204F000 0x1000>; - }; - - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti", "fixed-clock"; - clock-frequency = <0>; - }; - - xusbxti { - compatible = "samsung,clock-xusbxti", "fixed-clock"; - clock-frequency = <24000000>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - cam_io_reg: voltage-regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "CAM_SENSOR_A"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - lcd_vdd3_reg: voltage-regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "LCD_VDD_2.2V"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - cam_af_reg: voltage-regulator-3 { - compatible = "regulator-fixed"; - regulator-name = "CAM_AF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - ps_als_reg: voltage-regulator-5 { - compatible = "regulator-fixed"; - regulator-name = "LED_A_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vsil12: voltage-regulator-6 { - compatible = "regulator-fixed"; - regulator-name = "VSIL_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&buck7_reg>; - }; - - vcc33mhl: voltage-regulator-7 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3.3_MHL"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc18mhl: voltage-regulator-8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1.8_MHL"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key-down { - gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; - linux,code = <114>; - label = "volume down"; - debounce-interval = <10>; - }; - - key-up { - gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; - linux,code = <115>; - label = "volume up"; - debounce-interval = <10>; - }; - - key-power { - gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; - linux,code = <116>; - label = "power"; - debounce-interval = <10>; - wakeup-source; - }; - - key-ok { - gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; - linux,code = <139>; - label = "ok"; - debounce-inteval = <10>; - wakeup-source; - }; }; - - i2c_max77693: i2c-gpio-1 { - compatible = "i2c-gpio"; - gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - max77693@66 { - compatible = "maxim,max77693"; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - reg = <0x66>; - - regulators { - esafeout1_reg: ESAFEOUT1 { - regulator-name = "ESAFEOUT1"; - }; - esafeout2_reg: ESAFEOUT2 { - regulator-name = "ESAFEOUT2"; - }; - charger_reg: CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <60000>; - regulator-max-microamp = <2580000>; - }; - }; - - max77693_haptic { - compatible = "maxim,max77693-haptic"; - haptic-supply = <&ldo26_reg>; - pwms = <&pwm 0 38022 0>; - }; - - charger { - compatible = "maxim,max77693-charger"; - - maxim,constant-microvolt = <4350000>; - maxim,min-system-microvolt = <3600000>; - maxim,thermal-regulation-celsius = <100>; - maxim,battery-overcurrent-microamp = <3500000>; - maxim,charge-input-threshold-microvolt = <4300000>; - }; - }; - }; - - i2c_max77693_fuel: i2c-gpio-3 { - compatible = "i2c-gpio"; - gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - max77693-fuel-gauge@36 { - compatible = "maxim,max17047"; - interrupt-parent = <&gpx2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - reg = <0x36>; - - maxim,over-heat-temp = <700>; - maxim,over-volt = <4500>; - }; - }; - - i2c_ak8975: i2c-gpio-0 { - compatible = "i2c-gpio"; - gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ak8975@c { - compatible = "asahi-kasei,ak8975"; - reg = <0x0c>; - gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; - }; - }; - - i2c_cm36651: i2c-gpio-2 { - compatible = "i2c-gpio"; - gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - - cm36651@18 { - compatible = "capella,cm36651"; - reg = <0x18>; - interrupt-parent = <&gpx0>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; - vled-supply = <&ps_als_reg>; - }; - }; - - i2c-mhl { - compatible = "i2c-gpio"; - gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; - i2c-gpio,delay-us = <100>; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&i2c_mhl_bus>; - pinctrl-names = "default"; - status = "okay"; - - sii9234: hdmi-bridge@39 { - compatible = "sil,sii9234"; - avcc33-supply = <&vcc33mhl>; - iovcc18-supply = <&vcc18mhl>; - avcc12-supply = <&vsil12>; - cvcc12-supply = <&vsil12>; - reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpf3>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x39>; - - port { - mhl_to_hdmi: endpoint { - remote-endpoint = <&hdmi_to_mhl>; - }; - }; - }; - }; - - - wlan_pwrseq: sdhci3-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>; - clocks = <&max77686 MAX77686_CLK_PMIC>; - clock-names = "ext_clock"; - }; - - sound { - compatible = "samsung,trats2-audio"; - samsung,i2s-controller = <&i2s0>; - samsung,model = "Trats2"; - samsung,audio-codec = <&wm1811>; - samsung,audio-routing = - "SPK", "SPKOUTLN", - "SPK", "SPKOUTLP", - "SPK", "SPKOUTRN", - "SPK", "SPKOUTRP"; - }; - - thermistor-ap { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; /* VCC_1.8V_AP */ - pullup-ohm = <100000>; /* 100K */ - pulldown-ohm = <100000>; /* 100K */ - io-channels = <&adc 1>; /* AP temperature */ - }; - - thermistor-battery { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; /* VCC_1.8V_AP */ - pullup-ohm = <100000>; /* 100K */ - pulldown-ohm = <100000>; /* 100K */ - io-channels = <&adc 2>; /* Battery temperature */ - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>; - }; - }; - }; - }; -}; - -&adc { - vdd-supply = <&ldo3_reg>; - status = "okay"; -}; - -&bus_dmc { - devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; - vdd-supply = <&buck1_reg>; - status = "okay"; -}; - -&bus_acp { - devfreq = <&bus_dmc>; - status = "okay"; -}; - -&bus_c2c { - devfreq = <&bus_dmc>; - status = "okay"; -}; - -&bus_leftbus { - devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; - vdd-supply = <&buck3_reg>; - status = "okay"; -}; - -&bus_rightbus { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_display { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_fsys { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_peri { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_mfc { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&camera { - pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; - pinctrl-names = "default"; - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_CAM0>, - <&clock CLK_MOUT_CAM1>; - assigned-clock-parents = <&clock CLK_XUSBXTI>, - <&clock CLK_XUSBXTI>; -}; - -&cpu0 { - cpu0-supply = <&buck2_reg>; -}; - -&csis_0 { - status = "okay"; - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - assigned-clocks = <&clock CLK_MOUT_CSIS0>, - <&clock CLK_SCLK_CSIS0>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - - /* Camera C (3) MIPI CSI-2 (CSIS0) */ - port@3 { - reg = <3>; - csis0_ep: endpoint { - remote-endpoint = <&s5c73m3_ep>; - data-lanes = <1 2 3 4>; - samsung,csis-hs-settle = <12>; - }; - }; -}; - -&csis_1 { - status = "okay"; - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - assigned-clocks = <&clock CLK_MOUT_CSIS1>, - <&clock CLK_SCLK_CSIS1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - - /* Camera D (4) MIPI CSI-2 (CSIS1) */ - port@4 { - reg = <4>; - csis1_ep: endpoint { - remote-endpoint = <&is_s5k6a3_ep>; - data-lanes = <1>; - samsung,csis-hs-settle = <18>; - samsung,csis-wclk; - }; - }; -}; - -&dsi_0 { - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - samsung,pll-clock-frequency = <24000000>; - status = "okay"; - - panel@0 { - compatible = "samsung,s6e8aa0"; - reg = <0>; - vdd3-supply = <&lcd_vdd3_reg>; - vci-supply = <&ldo25_reg>; - reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; - power-on-delay= <50>; - reset-delay = <100>; - init-delay = <100>; - flip-horizontal; - flip-vertical; - panel-width-mm = <58>; - panel-height-mm = <103>; - - display-timings { - timing-0 { - clock-frequency = <57153600>; - hactive = <720>; - vactive = <1280>; - hfront-porch = <5>; - hback-porch = <5>; - hsync-len = <5>; - vfront-porch = <13>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; - }; -}; - -&exynos_usbphy { - vbus-supply = <&esafeout1_reg>; - status = "okay"; -}; - -&fimc_0 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC0>, - <&clock CLK_SCLK_FIMC0>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; -}; - -&fimc_1 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC1>, - <&clock CLK_SCLK_FIMC1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; -}; - -&fimc_2 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC2>, - <&clock CLK_SCLK_FIMC2>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; -}; - -&fimc_3 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC3>, - <&clock CLK_SCLK_FIMC3>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; -}; - -&fimc_is { - pinctrl-0 = <&fimc_is_uart>; - pinctrl-names = "default"; - status = "okay"; -}; - -&fimc_lite_0 { - status = "okay"; -}; - -&fimc_lite_1 { - status = "okay"; -}; - -&fimd { - status = "okay"; -}; - -&hdmi { - hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd>; - vdd-supply = <&ldo3_reg>; - vdd_osc-supply = <&ldo4_reg>; - vdd_pll-supply = <&ldo3_reg>; - ddc = <&i2c_5>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - hdmi_to_mhl: endpoint { - remote-endpoint = <&mhl_to_hdmi>; - }; - }; - }; -}; - -&hsotg { - vusb_d-supply = <&ldo15_reg>; - vusb_a-supply = <&ldo12_reg>; - dr_mode = "peripheral"; - status = "okay"; -}; - -&i2c_0 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - status = "okay"; - - s5c73m3@3c { - compatible = "samsung,s5c73m3"; - reg = <0x3c>; - standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ - xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ - vdd-int-supply = <&buck9_reg>; - vddio-cis-supply = <&ldo9_reg>; - vdda-supply = <&ldo17_reg>; - vddio-host-supply = <&ldo18_reg>; - vdd-af-supply = <&cam_af_reg>; - vdd-reg-supply = <&cam_io_reg>; - clock-frequency = <24000000>; - /* CAM_A_CLKOUT */ - clocks = <&camera 0>; - clock-names = "cis_extclk"; - port { - s5c73m3_ep: endpoint { - remote-endpoint = <&csis0_ep>; - data-lanes = <1 2 3 4>; - }; - }; - }; -}; - -&i2c1_isp { - pinctrl-0 = <&fimc_is_i2c1>; - pinctrl-names = "default"; - - s5k6a3@10 { - compatible = "samsung,s5k6a3"; - reg = <0x10>; - svdda-supply = <&cam_io_reg>; - svddio-supply = <&ldo19_reg>; - afvdd-supply = <&ldo19_reg>; - clock-frequency = <24000000>; - /* CAM_B_CLKOUT */ - clocks = <&camera 1>; - clock-names = "extclk"; - samsung,camclk-out = <1>; - gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; - - port { - is_s5k6a3_ep: endpoint { - remote-endpoint = <&csis1_ep>; - data-lanes = <1>; - }; - }; - }; -}; - -&i2c_3 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - pinctrl-0 = <&i2c3_bus>; - pinctrl-names = "default"; - status = "okay"; - - mms114-touchscreen@48 { - compatible = "melfas,mms114"; - reg = <0x48>; - interrupt-parent = <&gpm2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - x-size = <720>; - y-size = <1280>; - avdd-supply = <&ldo23_reg>; - vdd-supply = <&ldo24_reg>; - }; -}; - -&i2c_4 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c4_bus>; - pinctrl-names = "default"; - status = "okay"; - - wm1811: wm1811@1a { - compatible = "wlf,wm1811"; - reg = <0x1a>; - clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; - DCVDD-supply = <&ldo3_reg>; - DBVDD1-supply = <&ldo3_reg>; - wlf,ldo1ena = <&gpj0 4 0>; - }; -}; - -&i2c_5 { - status = "okay"; -}; - -&i2c_7 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c7_bus>; - pinctrl-names = "default"; - status = "okay"; - - max77686: max77686_pmic@9 { - compatible = "maxim,max77686"; - interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_NONE>; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "VALIVE_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "VM1M2_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo3_reg: LDO3 { - regulator-name = "VCC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VCC_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo5_reg: LDO5 { - regulator-name = "VCC_1.8V_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "VMPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo7_reg: LDO7 { - regulator-name = "VPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo8_reg: LDO8 { - regulator-name = "VMIPI_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo9_reg: LDO9 { - regulator-name = "CAM_ISP_MIPI_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo10_reg: LDO10 { - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo11_reg: LDO11 { - regulator-name = "VABB1_1.95V"; - regulator-min-microvolt = <1950000>; - regulator-max-microvolt = <1950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo12_reg: LDO12 { - regulator-name = "VUOTG_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo13_reg: LDO13 { - regulator-name = "NFC_AVDD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo14_reg: LDO14 { - regulator-name = "VABB2_1.95V"; - regulator-min-microvolt = <1950000>; - regulator-max-microvolt = <1950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo15_reg: LDO15 { - regulator-name = "VHSIC_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo16_reg: LDO16 { - regulator-name = "VHSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo17_reg: LDO17 { - regulator-name = "CAM_SENSOR_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo18_reg: LDO18 { - regulator-name = "CAM_ISP_SEN_IO_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: LDO19 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo20_reg: LDO20 { - regulator-name = "VDDQ_PRE_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo21_reg: LDO21 { - regulator-name = "VTF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; - }; - - ldo22_reg: LDO22 { - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; - }; - - ldo23_reg: LDO23 { - regulator-name = "TSP_AVDD_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo24_reg: LDO24 { - regulator-name = "TSP_VDD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo25_reg: LDO25 { - regulator-name = "LCD_VCC_3.3V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo26_reg: LDO26 { - regulator-name = "MOTOR_VCC_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck5_reg: BUCK5 { - regulator-name = "VMEM_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "VCC_SUB_1.35V"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "VCC_SUB_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "VMEM_VDDF_3.0V"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; - }; - - buck9_reg: BUCK9 { - regulator-name = "CAM_ISP_CORE_1.2V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1200000>; - maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; - }; - }; - }; -}; - -&i2c_8 { - status = "okay"; -}; - -&i2s0 { - pinctrl-0 = <&i2s0_bus>; - pinctrl-names = "default"; - status = "okay"; -}; - -&mixer { - status = "okay"; -}; - -&mshc_0 { - broken-cd; - non-removable; - card-detect-delay = <200>; - vmmc-supply = <&ldo22_reg>; - clock-frequency = <400000000>; - samsung,dw-mshc-ciu-div = <0>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; - pinctrl-names = "default"; - status = "okay"; - bus-width = <8>; - cap-mmc-highspeed; -}; - -&pmu_system_controller { - assigned-clocks = <&pmu_system_controller 0>; - assigned-clock-parents = <&clock CLK_XUSBXTI>; -}; - -&pinctrl_0 { - pinctrl-names = "default"; - pinctrl-0 = <&sleep0>; - - mhl_int: mhl-int { - samsung,pins = "gpf3-5"; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; - - i2c_mhl_bus: i2c-mhl-bus { - samsung,pins = "gpf0-4", "gpf0-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - sleep0: sleep-states { - PIN_SLP(gpa0-0, INPUT, NONE); - PIN_SLP(gpa0-1, OUT0, NONE); - PIN_SLP(gpa0-2, INPUT, NONE); - PIN_SLP(gpa0-3, INPUT, UP); - PIN_SLP(gpa0-4, INPUT, NONE); - PIN_SLP(gpa0-5, INPUT, DOWN); - PIN_SLP(gpa0-6, INPUT, DOWN); - PIN_SLP(gpa0-7, INPUT, UP); - - PIN_SLP(gpa1-0, INPUT, DOWN); - PIN_SLP(gpa1-1, INPUT, DOWN); - PIN_SLP(gpa1-2, INPUT, DOWN); - PIN_SLP(gpa1-3, INPUT, DOWN); - PIN_SLP(gpa1-4, INPUT, DOWN); - PIN_SLP(gpa1-5, INPUT, DOWN); - - PIN_SLP(gpb-0, INPUT, NONE); - PIN_SLP(gpb-1, INPUT, NONE); - PIN_SLP(gpb-2, INPUT, NONE); - PIN_SLP(gpb-3, INPUT, NONE); - PIN_SLP(gpb-4, INPUT, DOWN); - PIN_SLP(gpb-5, INPUT, UP); - PIN_SLP(gpb-6, INPUT, DOWN); - PIN_SLP(gpb-7, INPUT, DOWN); - - PIN_SLP(gpc0-0, INPUT, DOWN); - PIN_SLP(gpc0-1, INPUT, DOWN); - PIN_SLP(gpc0-2, INPUT, DOWN); - PIN_SLP(gpc0-3, INPUT, DOWN); - PIN_SLP(gpc0-4, INPUT, DOWN); - - PIN_SLP(gpc1-0, INPUT, NONE); - PIN_SLP(gpc1-1, PREV, NONE); - PIN_SLP(gpc1-2, INPUT, NONE); - PIN_SLP(gpc1-3, INPUT, NONE); - PIN_SLP(gpc1-4, INPUT, NONE); - - PIN_SLP(gpd0-0, INPUT, DOWN); - PIN_SLP(gpd0-1, INPUT, DOWN); - PIN_SLP(gpd0-2, INPUT, NONE); - PIN_SLP(gpd0-3, INPUT, NONE); - - PIN_SLP(gpd1-0, INPUT, DOWN); - PIN_SLP(gpd1-1, INPUT, DOWN); - PIN_SLP(gpd1-2, INPUT, NONE); - PIN_SLP(gpd1-3, INPUT, NONE); - - PIN_SLP(gpf0-0, INPUT, NONE); - PIN_SLP(gpf0-1, INPUT, NONE); - PIN_SLP(gpf0-2, INPUT, DOWN); - PIN_SLP(gpf0-3, INPUT, DOWN); - PIN_SLP(gpf0-4, INPUT, NONE); - PIN_SLP(gpf0-5, INPUT, DOWN); - PIN_SLP(gpf0-6, INPUT, NONE); - PIN_SLP(gpf0-7, INPUT, DOWN); - - PIN_SLP(gpf1-0, INPUT, DOWN); - PIN_SLP(gpf1-1, INPUT, DOWN); - PIN_SLP(gpf1-2, INPUT, DOWN); - PIN_SLP(gpf1-3, INPUT, DOWN); - PIN_SLP(gpf1-4, INPUT, NONE); - PIN_SLP(gpf1-5, INPUT, NONE); - PIN_SLP(gpf1-6, INPUT, DOWN); - PIN_SLP(gpf1-7, PREV, NONE); - - PIN_SLP(gpf2-0, PREV, NONE); - PIN_SLP(gpf2-1, INPUT, DOWN); - PIN_SLP(gpf2-2, INPUT, DOWN); - PIN_SLP(gpf2-3, INPUT, DOWN); - PIN_SLP(gpf2-4, INPUT, DOWN); - PIN_SLP(gpf2-5, INPUT, DOWN); - PIN_SLP(gpf2-6, INPUT, NONE); - PIN_SLP(gpf2-7, INPUT, NONE); - - PIN_SLP(gpf3-0, INPUT, NONE); - PIN_SLP(gpf3-1, PREV, NONE); - PIN_SLP(gpf3-2, PREV, NONE); - PIN_SLP(gpf3-3, PREV, NONE); - PIN_SLP(gpf3-4, OUT1, NONE); - PIN_SLP(gpf3-5, INPUT, DOWN); - - PIN_SLP(gpj0-0, PREV, NONE); - PIN_SLP(gpj0-1, PREV, NONE); - PIN_SLP(gpj0-2, PREV, NONE); - PIN_SLP(gpj0-3, INPUT, DOWN); - PIN_SLP(gpj0-4, PREV, NONE); - PIN_SLP(gpj0-5, PREV, NONE); - PIN_SLP(gpj0-6, INPUT, DOWN); - PIN_SLP(gpj0-7, INPUT, DOWN); - - PIN_SLP(gpj1-0, INPUT, DOWN); - PIN_SLP(gpj1-1, PREV, NONE); - PIN_SLP(gpj1-2, PREV, NONE); - PIN_SLP(gpj1-3, INPUT, DOWN); - PIN_SLP(gpj1-4, INPUT, DOWN); - }; -}; - -&pinctrl_1 { - pinctrl-names = "default"; - pinctrl-0 = <&sleep1>; - - hdmi_hpd: hdmi-hpd { - samsung,pins = "gpx3-7"; - samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; - }; - - sleep1: sleep-states { - PIN_SLP(gpk0-0, PREV, NONE); - PIN_SLP(gpk0-1, PREV, NONE); - PIN_SLP(gpk0-2, OUT0, NONE); - PIN_SLP(gpk0-3, PREV, NONE); - PIN_SLP(gpk0-4, PREV, NONE); - PIN_SLP(gpk0-5, PREV, NONE); - PIN_SLP(gpk0-6, PREV, NONE); - - PIN_SLP(gpk1-0, INPUT, DOWN); - PIN_SLP(gpk1-1, INPUT, DOWN); - PIN_SLP(gpk1-2, INPUT, DOWN); - PIN_SLP(gpk1-3, PREV, NONE); - PIN_SLP(gpk1-4, PREV, NONE); - PIN_SLP(gpk1-5, PREV, NONE); - PIN_SLP(gpk1-6, PREV, NONE); - - PIN_SLP(gpk2-0, INPUT, DOWN); - PIN_SLP(gpk2-1, INPUT, DOWN); - PIN_SLP(gpk2-2, INPUT, DOWN); - PIN_SLP(gpk2-3, INPUT, DOWN); - PIN_SLP(gpk2-4, INPUT, DOWN); - PIN_SLP(gpk2-5, INPUT, DOWN); - PIN_SLP(gpk2-6, INPUT, DOWN); - - PIN_SLP(gpk3-0, OUT0, NONE); - PIN_SLP(gpk3-1, INPUT, NONE); - PIN_SLP(gpk3-2, INPUT, DOWN); - PIN_SLP(gpk3-3, INPUT, NONE); - PIN_SLP(gpk3-4, INPUT, NONE); - PIN_SLP(gpk3-5, INPUT, NONE); - PIN_SLP(gpk3-6, INPUT, NONE); - - PIN_SLP(gpl0-0, INPUT, DOWN); - PIN_SLP(gpl0-1, INPUT, DOWN); - PIN_SLP(gpl0-2, INPUT, DOWN); - PIN_SLP(gpl0-3, INPUT, DOWN); - PIN_SLP(gpl0-4, PREV, NONE); - PIN_SLP(gpl0-6, PREV, NONE); - - PIN_SLP(gpl1-0, INPUT, DOWN); - PIN_SLP(gpl1-1, INPUT, DOWN); - PIN_SLP(gpl2-0, INPUT, DOWN); - PIN_SLP(gpl2-1, INPUT, DOWN); - PIN_SLP(gpl2-2, INPUT, DOWN); - PIN_SLP(gpl2-3, INPUT, DOWN); - PIN_SLP(gpl2-4, INPUT, DOWN); - PIN_SLP(gpl2-5, INPUT, DOWN); - PIN_SLP(gpl2-6, PREV, NONE); - PIN_SLP(gpl2-7, INPUT, DOWN); - - PIN_SLP(gpm0-0, INPUT, DOWN); - PIN_SLP(gpm0-1, INPUT, DOWN); - PIN_SLP(gpm0-2, INPUT, DOWN); - PIN_SLP(gpm0-3, INPUT, DOWN); - PIN_SLP(gpm0-4, INPUT, DOWN); - PIN_SLP(gpm0-5, INPUT, DOWN); - PIN_SLP(gpm0-6, INPUT, DOWN); - PIN_SLP(gpm0-7, INPUT, DOWN); - - PIN_SLP(gpm1-0, INPUT, DOWN); - PIN_SLP(gpm1-1, INPUT, DOWN); - PIN_SLP(gpm1-2, INPUT, NONE); - PIN_SLP(gpm1-3, INPUT, NONE); - PIN_SLP(gpm1-4, INPUT, NONE); - PIN_SLP(gpm1-5, INPUT, NONE); - PIN_SLP(gpm1-6, INPUT, DOWN); - - PIN_SLP(gpm2-0, INPUT, NONE); - PIN_SLP(gpm2-1, INPUT, NONE); - PIN_SLP(gpm2-2, INPUT, DOWN); - PIN_SLP(gpm2-3, INPUT, DOWN); - PIN_SLP(gpm2-4, INPUT, DOWN); - - PIN_SLP(gpm3-0, PREV, NONE); - PIN_SLP(gpm3-1, PREV, NONE); - PIN_SLP(gpm3-2, PREV, NONE); - PIN_SLP(gpm3-3, OUT1, NONE); - PIN_SLP(gpm3-4, INPUT, DOWN); - PIN_SLP(gpm3-5, INPUT, DOWN); - PIN_SLP(gpm3-6, INPUT, DOWN); - PIN_SLP(gpm3-7, INPUT, DOWN); - - PIN_SLP(gpm4-0, INPUT, DOWN); - PIN_SLP(gpm4-1, INPUT, DOWN); - PIN_SLP(gpm4-2, INPUT, DOWN); - PIN_SLP(gpm4-3, INPUT, DOWN); - PIN_SLP(gpm4-4, INPUT, DOWN); - PIN_SLP(gpm4-5, INPUT, DOWN); - PIN_SLP(gpm4-6, INPUT, DOWN); - PIN_SLP(gpm4-7, INPUT, DOWN); - - PIN_SLP(gpy0-0, INPUT, DOWN); - PIN_SLP(gpy0-1, INPUT, DOWN); - PIN_SLP(gpy0-2, INPUT, DOWN); - PIN_SLP(gpy0-3, INPUT, DOWN); - PIN_SLP(gpy0-4, INPUT, DOWN); - PIN_SLP(gpy0-5, INPUT, DOWN); - - PIN_SLP(gpy1-0, INPUT, DOWN); - PIN_SLP(gpy1-1, INPUT, DOWN); - PIN_SLP(gpy1-2, INPUT, DOWN); - PIN_SLP(gpy1-3, INPUT, DOWN); - - PIN_SLP(gpy2-0, PREV, NONE); - PIN_SLP(gpy2-1, INPUT, DOWN); - PIN_SLP(gpy2-2, INPUT, NONE); - PIN_SLP(gpy2-3, INPUT, NONE); - PIN_SLP(gpy2-4, INPUT, NONE); - PIN_SLP(gpy2-5, INPUT, NONE); - - PIN_SLP(gpy3-0, INPUT, DOWN); - PIN_SLP(gpy3-1, INPUT, DOWN); - PIN_SLP(gpy3-2, INPUT, DOWN); - PIN_SLP(gpy3-3, INPUT, DOWN); - PIN_SLP(gpy3-4, INPUT, DOWN); - PIN_SLP(gpy3-5, INPUT, DOWN); - PIN_SLP(gpy3-6, INPUT, DOWN); - PIN_SLP(gpy3-7, INPUT, DOWN); - - PIN_SLP(gpy4-0, INPUT, DOWN); - PIN_SLP(gpy4-1, INPUT, DOWN); - PIN_SLP(gpy4-2, INPUT, DOWN); - PIN_SLP(gpy4-3, INPUT, DOWN); - PIN_SLP(gpy4-4, INPUT, DOWN); - PIN_SLP(gpy4-5, INPUT, DOWN); - PIN_SLP(gpy4-6, INPUT, DOWN); - PIN_SLP(gpy4-7, INPUT, DOWN); - - PIN_SLP(gpy5-0, INPUT, DOWN); - PIN_SLP(gpy5-1, INPUT, DOWN); - PIN_SLP(gpy5-2, INPUT, DOWN); - PIN_SLP(gpy5-3, INPUT, DOWN); - PIN_SLP(gpy5-4, INPUT, DOWN); - PIN_SLP(gpy5-5, INPUT, DOWN); - PIN_SLP(gpy5-6, INPUT, DOWN); - PIN_SLP(gpy5-7, INPUT, DOWN); - - PIN_SLP(gpy6-0, INPUT, DOWN); - PIN_SLP(gpy6-1, INPUT, DOWN); - PIN_SLP(gpy6-2, INPUT, DOWN); - PIN_SLP(gpy6-3, INPUT, DOWN); - PIN_SLP(gpy6-4, INPUT, DOWN); - PIN_SLP(gpy6-5, INPUT, DOWN); - PIN_SLP(gpy6-6, INPUT, DOWN); - PIN_SLP(gpy6-7, INPUT, DOWN); - }; -}; - -&pinctrl_2 { - pinctrl-names = "default"; - pinctrl-0 = <&sleep2>; - - sleep2: sleep-states { - PIN_SLP(gpz-0, INPUT, DOWN); - PIN_SLP(gpz-1, INPUT, DOWN); - PIN_SLP(gpz-2, INPUT, DOWN); - PIN_SLP(gpz-3, INPUT, DOWN); - PIN_SLP(gpz-4, INPUT, DOWN); - PIN_SLP(gpz-5, INPUT, DOWN); - PIN_SLP(gpz-6, INPUT, DOWN); - }; -}; - -&pinctrl_3 { - pinctrl-names = "default"; - pinctrl-0 = <&sleep3>; - - sleep3: sleep-states { - PIN_SLP(gpv0-0, INPUT, DOWN); - PIN_SLP(gpv0-1, INPUT, DOWN); - PIN_SLP(gpv0-2, INPUT, DOWN); - PIN_SLP(gpv0-3, INPUT, DOWN); - PIN_SLP(gpv0-4, INPUT, DOWN); - PIN_SLP(gpv0-5, INPUT, DOWN); - PIN_SLP(gpv0-6, INPUT, DOWN); - PIN_SLP(gpv0-7, INPUT, DOWN); - - PIN_SLP(gpv1-0, INPUT, DOWN); - PIN_SLP(gpv1-1, INPUT, DOWN); - PIN_SLP(gpv1-2, INPUT, DOWN); - PIN_SLP(gpv1-3, INPUT, DOWN); - PIN_SLP(gpv1-4, INPUT, DOWN); - PIN_SLP(gpv1-5, INPUT, DOWN); - PIN_SLP(gpv1-6, INPUT, DOWN); - PIN_SLP(gpv1-7, INPUT, DOWN); - - PIN_SLP(gpv2-0, INPUT, DOWN); - PIN_SLP(gpv2-1, INPUT, DOWN); - PIN_SLP(gpv2-2, INPUT, DOWN); - PIN_SLP(gpv2-3, INPUT, DOWN); - PIN_SLP(gpv2-4, INPUT, DOWN); - PIN_SLP(gpv2-5, INPUT, DOWN); - PIN_SLP(gpv2-6, INPUT, DOWN); - PIN_SLP(gpv2-7, INPUT, DOWN); - - PIN_SLP(gpv3-0, INPUT, DOWN); - PIN_SLP(gpv3-1, INPUT, DOWN); - PIN_SLP(gpv3-2, INPUT, DOWN); - PIN_SLP(gpv3-3, INPUT, DOWN); - PIN_SLP(gpv3-4, INPUT, DOWN); - PIN_SLP(gpv3-5, INPUT, DOWN); - PIN_SLP(gpv3-6, INPUT, DOWN); - PIN_SLP(gpv3-7, INPUT, DOWN); - - PIN_SLP(gpv4-0, INPUT, DOWN); - }; -}; - -&pwm { - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; - samsung,pwm-outputs = <0>; - status = "okay"; -}; - -&rtc { - status = "okay"; - clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; - clock-names = "rtc", "rtc_src"; -}; - -&sdhci_2 { - bus-width = <4>; - cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; - cd-inverted; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&ldo21_reg>; - status = "okay"; -}; - -&sdhci_3 { - #address-cells = <1>; - #size-cells = <0>; - non-removable; - bus-width = <4>; - - mmc-pwrseq = <&wlan_pwrseq>; - pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&gpx2>; - interrupts = <5 IRQ_TYPE_NONE>; - interrupt-names = "host-wake"; - }; -}; - -&serial_0 { - status = "okay"; -}; - -&serial_1 { - status = "okay"; -}; - -&serial_2 { - status = "okay"; -}; - -&serial_3 { - status = "okay"; -}; - -&spi_1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_bus>; - cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; - status = "okay"; - - s5c73m3_spi: s5c73m3@0 { - compatible = "samsung,s5c73m3"; - spi-max-frequency = <50000000>; - reg = <0>; - controller-data { - samsung,spi-feedback-delay = <2>; - }; - }; -}; - -&tmu { - vtmu-supply = <&ldo10_reg>; - status = "okay"; }; |