diff options
author | Krzysztof Kozlowski <krzk@kernel.org> | 2019-03-09 18:00:39 +0300 |
---|---|---|
committer | Krzysztof Kozlowski <krzk@kernel.org> | 2019-03-20 00:08:02 +0300 |
commit | 9a435fb2291d583ae012d4e853bd9987b367bba1 (patch) | |
tree | b4d44ef4154448d7219af07814ab29580da3a350 /arch/arm/boot/dts/exynos5420-arndale-octa.dts | |
parent | 3a6a6d0a8b660c9a075c981e40405cc67b145972 (diff) | |
download | linux-9a435fb2291d583ae012d4e853bd9987b367bba1.tar.xz |
ARM: dts: exynos: Extend the eMMC node on Arndale Octa
Describe properly the MMC0 node (with attached embedded MMC memory) on
Arndale Octa by:
1. Adding the regulator for host interface (although it still has to be
"always-on" so the board with Linaro U-Boot will boot properly);
2. Using "non-removable" instead of "broken-cd" property, because eMMC
is embedded into the board;
3. Adding support for HS200 v1.8 to indicate such support in host
controller although this has no practical effect (embedded memory does
not support it).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/exynos5420-arndale-octa.dts')
-rw-r--r-- | arch/arm/boot/dts/exynos5420-arndale-octa.dts | 10 |
1 files changed, 9 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index de0a6840dfbc..74184c6ce3bf 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -378,6 +378,12 @@ regulator-name = "PVDD_APIO_MMCON_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + /* + * Must be always on, even though there is + * a consumer (mmc_0). Otherwise the board + * does not reboot with vendor U-Boot + * (Linaro for Arndale Octa, v2012.07). + */ regulator-always-on; }; @@ -685,7 +691,7 @@ &mmc_0 { status = "okay"; - broken-cd; + non-removable; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; @@ -693,8 +699,10 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; vmmc-supply = <&ldo10_reg>; + vqmmc-supply = <&ldo3_reg>; bus-width = <8>; cap-mmc-highspeed; + mmc-hs200-1_8v; }; &mmc_2 { |