diff options
| author | Marco Franchi <marco.franchi@nxp.com> | 2017-10-26 18:25:14 +0300 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2017-12-26 11:15:44 +0300 |
| commit | faee0fe2e2ec540977c7080a68da87c39e1fe182 (patch) | |
| tree | 635467443c0ba3586602dc5ed469a6cc2153068e /arch/arm/boot/dts/imx53-tx53.dtsi | |
| parent | 85f8ee78ab72451ab8ba655dca566bdbbca595c6 (diff) | |
| download | linux-faee0fe2e2ec540977c7080a68da87c39e1fe182.tar.xz | |
ARM: dts: imx53-tx53: Fix 'ethernet-phy@0' node with unit name and no reg property
The following build warning is seen with W=1:
Warning (unit_address_vs_reg): Node /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 has a unit name, but no reg property
Fix this warning by adding reg property from such node and, consequently,
includes a mdio node into the fec node, with the 'address-cells' and
'size-cells' to avoid these other following warnings:
Warning (reg_format): "reg" property in /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0
Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Tested-by: Lothar Waßmann <LW@karo-electronics.de>
Acked-by: Lothar Waßmann <LW@karo-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/imx53-tx53.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx53-tx53.dtsi | 14 |
1 files changed, 10 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 71b58b6933e1..a22e461fc168 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -225,10 +225,16 @@ mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */ status = "okay"; - phy0: ethernet-phy@0 { - interrupt-parent = <&gpio2>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - device_type = "ethernet-phy"; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + device_type = "ethernet-phy"; + }; }; }; |