summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx6sl-warp.dts
diff options
context:
space:
mode:
authorFabio Estevam <fabio.estevam@freescale.com>2015-05-01 01:55:29 +0300
committerShawn Guo <shawn.guo@linaro.org>2015-06-03 10:03:58 +0300
commitd000d5e12938886ee7eb4f93f1dda9655ec0051a (patch)
treedab18067d868212d2bbba5642783745961dbadee /arch/arm/boot/dts/imx6sl-warp.dts
parente6c8b3d49c0b602875a6e8b2b22a2002326d64a4 (diff)
downloadlinux-d000d5e12938886ee7eb4f93f1dda9655ec0051a.tar.xz
ARM: dts: imx6sl-warp: Remove USB regulators
According to the warp schematics there are no regulators for the USB OTG ports, so let's remove them. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/imx6sl-warp.dts')
-rw-r--r--arch/arm/boot/dts/imx6sl-warp.dts28
1 files changed, 0 insertions, 28 deletions
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
index 232597a59122..cec189a16352 100644
--- a/arch/arm/boot/dts/imx6sl-warp.dts
+++ b/arch/arm/boot/dts/imx6sl-warp.dts
@@ -58,32 +58,6 @@
reg = <0x80000000 0x20000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb_otg1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_otg1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 0 0>;
- enable-active-high;
- };
-
- reg_usb_otg2_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb_otg2_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 2 0>;
- enable-active-high;
- };
- };
-
usdhc3_pwrseq: usdhc3_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
@@ -113,14 +87,12 @@
};
&usbotg1 {
- vbus-supply = <&reg_usb_otg1_vbus>;
dr_mode = "host";
disable-over-current;
status = "okay";
};
&usbotg2 {
- vbus-supply = <&reg_usb_otg2_vbus>;
disable-over-current;
status = "okay";
};