ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 1290 deletions

diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
deleted file mode 100644
index 54026c2c93fa..000000000000
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ /dev/null
@@ -1,1290 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2015 Freescale Semiconductor, Inc.
-// Copyright 2016 Toradex AG
-
-#include <dt-bindings/clock/imx7d-clock.h>
-#include <dt-bindings/power/imx7-power.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset/imx7-reset.h>
-#include "imx7d-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		serial6 = &uart7;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &ecspi3;
-		spi3 = &ecspi4;
-		usb0 = &usbotg1;
-		usb1 = &usbh;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		idle-states {
-			entry-method = "psci";
-
-			cpu_sleep_wait: cpu-sleep-wait {
-				compatible = "arm,idle-state";
-				arm,psci-suspend-param = <0x0010000>;
-				local-timer-stop;
-				entry-latency-us = <100>;
-				exit-latency-us = <50>;
-				min-residency-us = <1000>;
-			};
-		};
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <792000000>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks IMX7D_CLK_ARM>;
-			cpu-idle-states = <&cpu_sleep_wait>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-			nvmem-cells = <&fuse_grade>;
-			nvmem-cell-names = "speed_grade";
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-792000000 {
-			opp-hz = /bits/ 64 <792000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <150000>;
-			opp-supported-hw = <0xf>, <0xf>;
-		};
-	};
-
-	ckil: clock-cki {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "ckil";
-	};
-
-	osc: clock-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc";
-	};
-
-	usbphynop1: usbphynop1 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX7D_USB_PHY1_CLK>;
-		clock-names = "main_clk";
-		#phy-cells = <0>;
-	};
-
-	usbphynop3: usbphynop3 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
-		clock-names = "main_clk";
-		power-domains = <&pgc_hsic_phy>;
-		#phy-cells = <0>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupt-parent = <&gpc>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>;
-	};
-
-	replicator {
-		/*
-		 * non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell"
-		 */
-		compatible = "arm,coresight-static-replicator";
-
-		out-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-				/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&etr_in_port>;
-				};
-			};
-		};
-
-		in-ports {
-			port {
-				replicator_in_port0: endpoint {
-					remote-endpoint = <&etf_out_port>;
-				};
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		arm,cpu-registers-not-fw-configured;
-		interrupt-parent = <&intc>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gpc>;
-		ranges;
-
-		funnel@30041000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x30041000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			ca_funnel_in_ports: in-ports {
-				port {
-					ca_funnel_in_port0: endpoint {
-						remote-endpoint = <&etm0_out_port>;
-					};
-				};
-
-				/* the other input ports are not connect to anything */
-			};
-
-			out-ports {
-				port {
-					ca_funnel_out_port0: endpoint {
-						remote-endpoint = <&hugo_funnel_in_port0>;
-					};
-				};
-
-			};
-		};
-
-		etm@3007c000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x3007c000 0x1000>;
-			cpu = <&cpu0>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				port {
-					etm0_out_port: endpoint {
-						remote-endpoint = <&ca_funnel_in_port0>;
-					};
-				};
-			};
-		};
-
-		funnel@30083000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x30083000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					hugo_funnel_in_port0: endpoint {
-						remote-endpoint = <&ca_funnel_out_port0>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					hugo_funnel_in_port1: endpoint {
-						/* M4 input */
-					};
-				};
-				/* the other input ports are not connect to anything */
-			};
-
-			out-ports {
-				port {
-					hugo_funnel_out_port0: endpoint {
-						remote-endpoint = <&etf_in_port>;
-					};
-				};
-			};
-		};
-
-		etf@30084000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x30084000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					etf_in_port: endpoint {
-						remote-endpoint = <&hugo_funnel_out_port0>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					etf_out_port: endpoint {
-						remote-endpoint = <&replicator_in_port0>;
-					};
-				};
-			};
-		};
-
-		etr@30086000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x30086000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					etr_in_port: endpoint {
-						remote-endpoint = <&replicator_out_port1>;
-					};
-				};
-			};
-		};
-
-		tpiu@30087000 {
-			compatible = "arm,coresight-tpiu", "arm,primecell";
-			reg = <0x30087000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					tpiu_in_port: endpoint {
-						remote-endpoint = <&replicator_out_port0>;
-					};
-				};
-			};
-		};
-
-		intc: interrupt-controller@31001000 {
-			compatible = "arm,cortex-a7-gic";
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupt-parent = <&intc>;
-			reg = <0x31001000 0x1000>,
-			      <0x31002000 0x2000>,
-			      <0x31004000 0x2000>,
-			      <0x31006000 0x2000>;
-		};
-
-		aips1: bus@30000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30000000 0x400000>;
-			ranges;
-
-			gpio1: gpio@30200000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30200000 0x10000>;
-				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
-					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
-			};
-
-			gpio2: gpio@30210000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30210000 0x10000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 13 32>;
-			};
-
-			gpio3: gpio@30220000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30220000 0x10000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 45 29>;
-			};
-
-			gpio4: gpio@30230000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30230000 0x10000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 74 24>;
-			};
-
-			gpio5: gpio@30240000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30240000 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 98 18>;
-			};
-
-			gpio6: gpio@30250000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30250000 0x10000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 116 23>;
-			};
-
-			gpio7: gpio@30260000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30260000 0x10000>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 139 16>;
-			};
-
-			wdog1: watchdog@30280000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x30280000 0x10000>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
-			};
-
-			wdog2: watchdog@30290000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x30290000 0x10000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			wdog3: watchdog@302a0000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x302a0000 0x10000>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			wdog4: watchdog@302b0000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x302b0000 0x10000>;
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			iomuxc_lpsr: pinctrl@302c0000 {
-				compatible = "fsl,imx7d-iomuxc-lpsr";
-				reg = <0x302c0000 0x10000>;
-				fsl,input-sel = <&iomuxc>;
-			};
-
-			gpt1: timer@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302d0000 0x10000>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
-					 <&clks IMX7D_GPT1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt2: timer@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302e0000 0x10000>;
-				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
-					 <&clks IMX7D_GPT2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt3: timer@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302f0000 0x10000>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
-					 <&clks IMX7D_GPT3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt4: timer@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x30300000 0x10000>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
-					 <&clks IMX7D_GPT4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			kpp: keypad@30320000 {
-				compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
-				reg = <0x30320000 0x10000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_KPP_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			iomuxc: pinctrl@30330000 {
-				compatible = "fsl,imx7d-iomuxc";
-				reg = <0x30330000 0x10000>;
-			};
-
-			gpr: iomuxc-gpr@30340000 {
-				compatible = "fsl,imx7d-iomuxc-gpr",
-					"fsl,imx6q-iomuxc-gpr", "syscon",
-					"simple-mfd";
-				reg = <0x30340000 0x10000>;
-
-				mux: mux-controller {
-					compatible = "mmio-mux";
-					#mux-control-cells = <1>;
-					mux-reg-masks = <0x14 0x00000010>;
-				};
-
-				video_mux: csi-mux {
-					compatible = "video-mux";
-					mux-controls = <&mux 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					status = "disabled";
-
-					port@0 {
-						reg = <0>;
-					};
-
-					port@1 {
-						reg = <1>;
-
-						csi_mux_from_mipi_vc0: endpoint {
-							remote-endpoint = <&mipi_vc0_to_csi_mux>;
-						};
-					};
-
-					port@2 {
-						reg = <2>;
-
-						csi_mux_to_csi: endpoint {
-							remote-endpoint = <&csi_from_csi_mux>;
-						};
-					};
-				};
-			};
-
-			ocotp: efuse@30350000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,imx7d-ocotp", "syscon";
-				reg = <0x30350000 0x10000>;
-				clocks = <&clks IMX7D_OCOTP_CLK>;
-
-				tempmon_calib: calib@3c {
-					reg = <0x3c 0x4>;
-				};
-
-				fuse_grade: fuse-grade@10 {
-					reg = <0x10 0x4>;
-				};
-			};
-
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
-					"syscon", "simple-mfd";
-				reg = <0x30360000 0x10000>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-
-				reg_1p0d: regulator-vdd1p0d {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p0d";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1200000>;
-					anatop-reg-offset = <0x210>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <8>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1200000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_1p2: regulator-vdd1p2 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p2";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1300000>;
-					anatop-reg-offset = <0x220>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0x14>;
-					anatop-min-voltage = <1100000>;
-					anatop-max-voltage = <1300000>;
-					anatop-enable-bit = <0>;
-				};
-
-				tempmon: tempmon {
-					compatible = "fsl,imx7d-tempmon";
-					interrupt-parent = <&gpc>;
-					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-					fsl,tempmon = <&anatop>;
-					nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
-					nvmem-cell-names = "calib", "temp_grade";
-					clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
-				};
-			};
-
-			snvs: snvs@30370000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x30370000 0x10000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_SNVS_CLK>;
-					clock-names = "snvs-rtc";
-				};
-
-				snvs_pwrkey: snvs-powerkey {
-					compatible = "fsl,sec-v4.0-pwrkey";
-					regmap = <&snvs>;
-					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_SNVS_CLK>;
-					clock-names = "snvs-pwrkey";
-					linux,keycode = <KEY_POWER>;
-					wakeup-source;
-					status = "disabled";
-				};
-			};
-
-			clks: clock-controller@30380000 {
-				compatible = "fsl,imx7d-ccm";
-				reg = <0x30380000 0x10000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>;
-				clock-names = "ckil", "osc";
-			};
-
-			src: reset-controller@30390000 {
-				compatible = "fsl,imx7d-src", "syscon";
-				reg = <0x30390000 0x10000>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-
-			gpc: gpc@303a0000 {
-				compatible = "fsl,imx7d-gpc";
-				reg = <0x303a0000 0x10000>;
-				interrupt-controller;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <3>;
-				interrupt-parent = <&intc>;
-				#power-domain-cells = <1>;
-
-				pgc {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pgc_mipi_phy: power-domain@0 {
-						#power-domain-cells = <0>;
-						reg = <0>;
-						power-supply = <&reg_1p0d>;
-					};
-
-					pgc_pcie_phy: power-domain@1 {
-						#power-domain-cells = <0>;
-						reg = <1>;
-						power-supply = <&reg_1p0d>;
-					};
-
-					pgc_hsic_phy: power-domain@2 {
-						#power-domain-cells = <0>;
-						reg = <2>;
-						power-supply = <&reg_1p2>;
-					};
-				};
-			};
-		};
-
-		aips2: bus@30400000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30400000 0x400000>;
-			ranges;
-
-			adc1: adc@30610000 {
-				compatible = "fsl,imx7d-adc";
-				reg = <0x30610000 0x10000>;
-				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-				clock-names = "adc";
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-
-			adc2: adc@30620000 {
-				compatible = "fsl,imx7d-adc";
-				reg = <0x30620000 0x10000>;
-				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-				clock-names = "adc";
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-
-			ecspi4: spi@30630000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30630000 0x10000>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
-					<&clks IMX7D_ECSPI4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			ftm1: pwm@30640000 {
-				compatible = "fsl,vf610-ftm-pwm";
-				reg = <0x30640000 0x10000>;
-				#pwm-cells = <3>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-				clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
-					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
-					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
-					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			ftm2: pwm@30650000 {
-				compatible = "fsl,vf610-ftm-pwm";
-				reg = <0x30650000 0x10000>;
-				#pwm-cells = <3>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-				clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
-					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
-					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
-					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			pwm1: pwm@30660000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30660000 0x10000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
-					 <&clks IMX7D_PWM1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm2: pwm@30670000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30670000 0x10000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
-					 <&clks IMX7D_PWM2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm3: pwm@30680000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30680000 0x10000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
-					 <&clks IMX7D_PWM3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm4: pwm@30690000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30690000 0x10000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
-					 <&clks IMX7D_PWM4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			csi: csi@30710000 {
-				compatible = "fsl,imx7-csi";
-				reg = <0x30710000 0x10000>;
-				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
-					 <&clks IMX7D_CLK_DUMMY>;
-				clock-names = "axi", "mclk", "dcic";
-				status = "disabled";
-
-				port {
-					csi_from_csi_mux: endpoint {
-						remote-endpoint = <&csi_mux_to_csi>;
-					};
-				};
-			};
-
-			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
-				reg = <0x30730000 0x10000>;
-				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
-					<&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
-				clock-names = "pix", "axi";
-				status = "disabled";
-			};
-
-			mipi_csi: mipi-csi@30750000 {
-				compatible = "fsl,imx7-mipi-csi2";
-				reg = <0x30750000 0x10000>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
-					 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
-				clock-names = "pclk", "wrap", "phy";
-				power-domains = <&pgc_mipi_phy>;
-				phy-supply = <&reg_1p0d>;
-				resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
-				status = "disabled";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-					};
-
-					port@1 {
-						reg = <1>;
-
-						mipi_vc0_to_csi_mux: endpoint {
-							remote-endpoint = <&csi_mux_from_mipi_vc0>;
-						};
-					};
-				};
-			};
-		};
-
-		aips3: bus@30800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30800000 0x400000>;
-			ranges;
-
-			spba-bus@30800000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x30800000 0x100000>;
-				ranges;
-
-				ecspi1: spi@30820000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-					reg = <0x30820000 0x10000>;
-					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
-						<&clks IMX7D_ECSPI1_ROOT_CLK>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi2: spi@30830000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-					reg = <0x30830000 0x10000>;
-					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
-						<&clks IMX7D_ECSPI2_ROOT_CLK>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi3: spi@30840000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-					reg = <0x30840000 0x10000>;
-					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
-						<&clks IMX7D_ECSPI3_ROOT_CLK>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart1: serial@30860000 {
-					compatible = "fsl,imx7d-uart",
-						     "fsl,imx6q-uart";
-					reg = <0x30860000 0x10000>;
-					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_UART1_ROOT_CLK>,
-						<&clks IMX7D_UART1_ROOT_CLK>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart2: serial@30890000 {
-					compatible = "fsl,imx7d-uart",
-						     "fsl,imx6q-uart";
-					reg = <0x30890000 0x10000>;
-					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_UART2_ROOT_CLK>,
-						<&clks IMX7D_UART2_ROOT_CLK>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart3: serial@30880000 {
-					compatible = "fsl,imx7d-uart",
-						     "fsl,imx6q-uart";
-					reg = <0x30880000 0x10000>;
-					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_UART3_ROOT_CLK>,
-						<&clks IMX7D_UART3_ROOT_CLK>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				sai1: sai@308a0000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
-					reg = <0x308a0000 0x10000>;
-					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_SAI1_IPG_CLK>,
-						 <&clks IMX7D_SAI1_ROOT_CLK>,
-						 <&clks IMX7D_CLK_DUMMY>,
-						 <&clks IMX7D_CLK_DUMMY>;
-					clock-names = "bus", "mclk1", "mclk2", "mclk3";
-					dma-names = "rx", "tx";
-					dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
-					status = "disabled";
-				};
-
-				sai2: sai@308b0000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
-					reg = <0x308b0000 0x10000>;
-					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_SAI2_IPG_CLK>,
-						 <&clks IMX7D_SAI2_ROOT_CLK>,
-						 <&clks IMX7D_CLK_DUMMY>,
-						 <&clks IMX7D_CLK_DUMMY>;
-					clock-names = "bus", "mclk1", "mclk2", "mclk3";
-					dma-names = "rx", "tx";
-					dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
-					status = "disabled";
-				};
-
-				sai3: sai@308c0000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
-					reg = <0x308c0000 0x10000>;
-					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX7D_SAI3_IPG_CLK>,
-						 <&clks IMX7D_SAI3_ROOT_CLK>,
-						 <&clks IMX7D_CLK_DUMMY>,
-						 <&clks IMX7D_CLK_DUMMY>;
-					clock-names = "bus", "mclk1", "mclk2", "mclk3";
-					dma-names = "rx", "tx";
-					dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
-					status = "disabled";
-				};
-			};
-
-			crypto: crypto@30900000 {
-				compatible = "fsl,sec-v4.0";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x30900000 0x40000>;
-				ranges = <0 0x30900000 0x40000>;
-				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CAAM_CLK>,
-					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
-				clock-names = "ipg", "aclk";
-
-				sec_jr0: jr@1000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x1000 0x1000>;
-					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				sec_jr1: jr@2000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x2000 0x1000>;
-					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				sec_jr2: jr@3000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x3000 0x1000>;
-					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-
-			flexcan1: can@30a00000 {
-				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x30a00000 0x10000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CAN1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				fsl,stop-mode = <&gpr 0x10 1>;
-				status = "disabled";
-			};
-
-			flexcan2: can@30a10000 {
-				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x30a10000 0x10000>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CAN2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				fsl,stop-mode = <&gpr 0x10 2>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@30a20000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a20000 0x10000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@30a30000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a30000 0x10000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@30a40000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a40000 0x10000>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c4: i2c@30a50000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a50000 0x10000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			uart4: serial@30a60000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a60000 0x10000>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
-					<&clks IMX7D_UART4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart5: serial@30a70000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a70000 0x10000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
-					<&clks IMX7D_UART5_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@30a80000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a80000 0x10000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
-					<&clks IMX7D_UART6_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart7: serial@30a90000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a90000 0x10000>;
-				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
-					<&clks IMX7D_UART7_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			mu0a: mailbox@30aa0000 {
-				compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
-				reg = <0x30aa0000 0x10000>;
-				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_MU_ROOT_CLK>;
-				#mbox-cells = <2>;
-				status = "disabled";
-			};
-
-			mu0b: mailbox@30ab0000 {
-				compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
-				reg = <0x30ab0000 0x10000>;
-				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_MU_ROOT_CLK>;
-				#mbox-cells = <2>;
-				fsl,mu-side-b;
-				status = "disabled";
-			};
-
-			usbotg1: usb@30b10000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b10000 0x200>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop1>;
-				fsl,usbmisc = <&usbmisc1 0>;
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbh: usb@30b30000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b30000 0x200>;
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop3>;
-				fsl,usbmisc = <&usbmisc3 0>;
-				phy_type = "hsic";
-				dr_mode = "host";
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbmisc1: usbmisc@30b10200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b10200 0x200>;
-			};
-
-			usbmisc3: usbmisc@30b30200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b30200 0x200>;
-			};
-
-			usdhc1: mmc@30b40000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b40000 0x10000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
-					<&clks IMX7D_USDHC1_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: mmc@30b50000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b50000 0x10000>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
-					<&clks IMX7D_USDHC2_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc3: mmc@30b60000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b60000 0x10000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
-					<&clks IMX7D_USDHC3_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			qspi: spi@30bb0000 {
-				compatible = "fsl,imx7d-qspi";
-				reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>;
-				reg-names = "QuadSPI", "QuadSPI-memory";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_QSPI_ROOT_CLK>,
-					<&clks IMX7D_QSPI_ROOT_CLK>;
-				clock-names = "qspi_en", "qspi";
-				status = "disabled";
-			};
-
-			sdma: dma-controller@30bd0000 {
-				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
-				reg = <0x30bd0000 0x10000>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					 <&clks IMX7D_SDMA_CORE_CLK>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
-			};
-
-			fec1: ethernet@30be0000 {
-				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
-				reg = <0x30be0000 0x10000>;
-				interrupt-names = "int0", "int1", "int2", "pps";
-				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ENET1_IPG_ROOT_CLK>,
-					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
-					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
-					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "ptp",
-					"enet_clk_ref", "enet_out";
-				fsl,num-tx-queues = <3>;
-				fsl,num-rx-queues = <3>;
-				fsl,stop-mode = <&gpr 0x10 3>;
-				status = "disabled";
-			};
-		};
-
-		dma_apbh: dma-controller@33000000 {
-			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
-			reg = <0x33000000 0x2000>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			dma-channels = <4>;
-			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
-		};
-
-		gpmi: nand-controller@33002000{
-			compatible = "fsl,imx7d-gpmi-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
-			reg-names = "gpmi-nand", "bch";
-			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "bch";
-			clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
-				<&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
-			clock-names = "gpmi_io", "gpmi_bch_apb";
-			dmas = <&dma_apbh 0>;
-			dma-names = "rx-tx";
-			status = "disabled";
-			assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
-			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
-		};
-	};
-};