summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/kirkwood-nsa310a.dts
diff options
context:
space:
mode:
authorOlof Johansson <olof@lixom.net>2014-05-20 08:55:03 +0400
committerOlof Johansson <olof@lixom.net>2014-05-20 08:55:03 +0400
commit61e810d36416effcfe25bbbba4f126c4b8462f3c (patch)
treece8028c68b70252841bbdc5dd6a38fb75914701d /arch/arm/boot/dts/kirkwood-nsa310a.dts
parent2bfac3a551978c4953f659e1bd18d58c3c249f64 (diff)
parent191825c38eafeda033a73338f5a710fa6fd5b3d6 (diff)
downloadlinux-61e810d36416effcfe25bbbba4f126c4b8462f3c.tar.xz
Merge tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu into next/dt
Merge "ARM: mvebu: DT changes for v3.16" from Jason Cooper: mvebu DT changes for v3.16 - kirkwood - rework nsa3x0 board to add nsa320 - large cleanup to facilitate use in barebox - guruplug phy updates - audio updates for t5325 - mvebu - use clocks vice clock-frequency for uart nodes - armada 375/380/385 - add watchdog node - add coherency fabric - add smp support - add sdhci - add ahci - add thermal sensor - armada 370/XP - and pmsu * tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu: (35 commits) ARM: Kirkwood: t5325: Use simple card to instantiate audio ARM: Kirkwood: DT: Add missing #sound-dai-cells property ARM: Kirkwood: Add node for audio codec ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id ARM: dts: kirkwood: set Guruplug ethernet PHY compatible ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282 ARM: dts: kirkwood: set default pinctrl for I2C0 ARM: dts: kirkwood: set default pinctrl for NAND ARM: dts: kirkwood: set default pinctrl for SPI0 ARM: dts: kirkwood: set default pinctrl for UART0/1 ARM: dts: kirkwood: set default pinctrl for GBE1 ARM: dts: kirkwood: consolidate common pinctrl settings ARM: dts: kirkwood: add pinctrl node to common SoC include ARM: dts: kirkwood: rename pin-controller nodes ARM: dts: kirkwood: remove clock-frequency properties from UART nodes ARM: dts: kirkwood: add stdout-path property to all boards ARM: dts: kirkwood: add node labels ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC ARM: mvebu: Enable the thermal sensor in Armada 375 SoC ARM: mvebu: don't use clocks property in UART node for Netgear RN2120 ... Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch/arm/boot/dts/kirkwood-nsa310a.dts')
-rw-r--r--arch/arm/boot/dts/kirkwood-nsa310a.dts57
1 files changed, 3 insertions, 54 deletions
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
index 27ca6a79c48a..3d2b3d494c19 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310a.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-#include "kirkwood-nsa310-common.dtsi"
+#include "kirkwood-nsa3x0-common.dtsi"
/*
* There are at least two different NSA310 designs. This variant does
@@ -17,10 +17,11 @@
chosen {
bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-names = "default";
pmx_led_esata_green: pmx-led-esata-green {
@@ -38,11 +39,6 @@
marvell,function = "gpio";
};
- pmx_usb_power_off: pmx-usb-power-off {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
@@ -53,26 +49,6 @@
marvell,function = "gpio";
};
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp36";
- marvell,function = "gpio";
- };
-
- pmx_btn_copy: pmx-btn-copy {
- marvell,pins = "mpp37";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_green: pmx-led-copy-green {
- marvell,pins = "mpp39";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_red: pmx-led-copy-red {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
-
pmx_led_hdd_green: pmx-led-hdd-green {
marvell,pins = "mpp41";
marvell,function = "gpio";
@@ -83,11 +59,6 @@
marvell,function = "gpio";
};
- pmx_btn_power: pmx-btn-power {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
-
};
i2c@11000 {
@@ -100,28 +71,6 @@
};
};
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- button@1 {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
- button@2 {
- label = "Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- button@3 {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
- };
-
gpio-leds {
compatible = "gpio-leds";