ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 334 deletions

diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
deleted file mode 100644
index 8e3860d5d916..000000000000
--- a/arch/arm/boot/dts/meson.dtsi
+++ /dev/null
@@ -1,334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/sound/meson-aiu.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&saradc 8>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		cbus: cbus@c1100000 {
-			compatible = "simple-bus";
-			reg = <0xc1100000 0x200000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc1100000 0x200000>;
-
-			hhi: system-controller@4000 {
-				compatible = "amlogic,meson-hhi-sysctrl",
-					     "simple-mfd",
-					     "syscon";
-				reg = <0x4000 0x400>;
-			};
-
-			aiu: audio-controller@5400 {
-				compatible = "amlogic,aiu";
-				#sound-dai-cells = <2>;
-				sound-name-prefix = "AIU";
-				reg = <0x5400 0x2ac>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
-					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
-				interrupt-names = "i2s", "spdif";
-				status = "disabled";
-			};
-
-			assist: assist@7c00 {
-				compatible = "amlogic,meson-mx-assist", "syscon";
-				reg = <0x7c00 0x200>;
-			};
-
-			hwrng: rng@8100 {
-				compatible = "amlogic,meson-rng";
-				reg = <0x8100 0x8>;
-			};
-
-			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart";
-				reg = <0x84c0 0x18>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-				fifo-size = <128>;
-				status = "disabled";
-			};
-
-			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart";
-				reg = <0x84dc 0x18>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			i2c_A: i2c@8500 {
-				compatible = "amlogic,meson6-i2c";
-				reg = <0x8500 0x20>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			pwm_ab: pwm@8550 {
-				compatible = "amlogic,meson-pwm";
-				reg = <0x8550 0x10>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm_cd: pwm@8650 {
-				compatible = "amlogic,meson-pwm";
-				reg = <0x8650 0x10>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			saradc: adc@8680 {
-				compatible = "amlogic,meson-saradc";
-				reg = <0x8680 0x34>;
-				#io-channel-cells = <1>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart";
-				reg = <0x8700 0x18>;
-				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			i2c_B: i2c@87c0 {
-				compatible = "amlogic,meson6-i2c";
-				reg = <0x87c0 0x20>;
-				interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			usb0_phy: phy@8800 {
-				compatible = "amlogic,meson-mx-usb2-phy";
-				#phy-cells = <0>;
-				reg = <0x8800 0x20>;
-				status = "disabled";
-			};
-
-			usb1_phy: phy@8820 {
-				compatible = "amlogic,meson-mx-usb2-phy";
-				#phy-cells = <0>;
-				reg = <0x8820 0x20>;
-				status = "disabled";
-			};
-
-			sdio: mmc@8c20 {
-				compatible = "amlogic,meson-mx-sdio";
-				reg = <0x8c20 0x20>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spifc: spi@8c80 {
-				compatible = "amlogic,meson6-spifc";
-				reg = <0x8c80 0x80>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			sdhc: mmc@8e00 {
-				compatible = "amlogic,meson-mx-sdhc";
-				reg = <0x8e00 0x42>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			gpio_intc: interrupt-controller@9880 {
-				compatible = "amlogic,meson-gpio-intc";
-				reg = <0x9880 0x10>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
-				status = "disabled";
-			};
-
-			wdt: watchdog@9900 {
-				compatible = "amlogic,meson6-wdt";
-				reg = <0x9900 0x8>;
-				interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
-			};
-
-			timer_abcde: timer@9940 {
-				compatible = "amlogic,meson6-timer";
-				reg = <0x9940 0x18>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
-					     <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
-					     <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
-					     <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
-			};
-		};
-
-		L2: cache-controller@c4200000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xc4200000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		periph: bus@c4300000 {
-			compatible = "simple-bus";
-			reg = <0xc4300000 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc4300000 0x10000>;
-
-			gic: interrupt-controller@1000 {
-				compatible = "arm,cortex-a9-gic";
-				reg = <0x1000 0x1000>,
-				      <0x100 0x100>;
-				interrupt-controller;
-				#interrupt-cells = <3>;
-			};
-		};
-
-		aobus: aobus@c8100000 {
-			compatible = "simple-bus";
-			reg = <0xc8100000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc8100000 0x100000>;
-
-			ao_arc_rproc: remoteproc@1c {
-				compatible = "amlogic,meson-mx-ao-arc";
-				reg = <0x1c 0x8>, <0x38 0x8>;
-				reg-names = "remap", "cpu";
-				status = "disabled";
-			};
-
-			ir_receiver: ir-receiver@480 {
-				compatible = "amlogic,meson6-ir";
-				reg = <0x480 0x20>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
-				reg = <0x4c0 0x18>;
-				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			i2c_AO: i2c@500 {
-				compatible = "amlogic,meson6-i2c";
-				reg = <0x500 0x20>;
-				interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			rtc: rtc@740 {
-				compatible = "amlogic,meson6-rtc";
-				reg = <0x740 0x14>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				status = "disabled";
-			};
-		};
-
-		usb0: usb@c9040000 {
-			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xc9040000 0x40000>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb0_phy>;
-			phy-names = "usb2-phy";
-			g-rx-fifo-size = <512>;
-			g-np-tx-fifo-size = <500>;
-			g-tx-fifo-size = <256 192 128 128 128>;
-			dr_mode = "host";
-			status = "disabled";
-		};
-
-		usb1: usb@c90c0000 {
-			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xc90c0000 0x40000>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb1_phy>;
-			phy-names = "usb2-phy";
-			dr_mode = "host";
-			status = "disabled";
-		};
-
-		ethmac: ethernet@c9410000 {
-			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
-			reg = <0xc9410000 0x10000
-			       0xc1108108 0x4>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			status = "disabled";
-		};
-
-		ahb_sram: sram@d9000000 {
-			compatible = "mmio-sram";
-			reg = <0xd9000000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0xd9000000 0x20000>;
-		};
-
-		bootrom: bootrom@d9040000 {
-			compatible = "amlogic,meson-mx-bootrom", "syscon";
-			reg = <0xd9040000 0x10000>;
-		};
-
-		secbus: secbus@da000000 {
-			compatible = "simple-bus";
-			reg = <0xda000000 0x6000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xda000000 0x6000>;
-
-			efuse: nvmem@0 {
-				compatible = "amlogic,meson6-efuse";
-				reg = <0x0 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-			};
-		};
-	};
-
-	thermal_sensor: thermal-sensor {
-		compatible = "generic-adc-thermal";
-		#thermal-sensor-cells = <0>;
-		io-channels = <&saradc 8>;
-		io-channel-names = "sensor-channel";
-	};
-
-	xtal: xtal-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
-	};
-}; /* end of / */