summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/meson8b-odroidc1.dts
diff options
context:
space:
mode:
authorCarlo Caione <ccaione@baylibre.com>2018-12-07 13:52:31 +0300
committerKevin Hilman <khilman@baylibre.com>2019-01-11 03:20:15 +0300
commite35e26b26e955c53e61c154ba26b9bb15da6b858 (patch)
treeb0d4570d16f0c722c50a75df5d4f234c66685130 /arch/arm/boot/dts/meson8b-odroidc1.dts
parent19a220dd1e8a1b1d8e5e2f8f4a25313c4b02d527 (diff)
downloadlinux-e35e26b26e955c53e61c154ba26b9bb15da6b858.tar.xz
arm: dts: meson: Fix IRQ trigger type for macirq
A long running stress test on a custom board shipping an AXG SoCs and a Realtek RTL8211F PHY revealed that after a few hours the connection speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time the 'macirq' (eth0) IRQ would stop being triggered at all and as consequence the GMAC IRQs never ACKed. After a painful investigation the problem seemed to be due to a wrong defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of EDGE_RISING. The change in the macirq IRQ type also solved another long standing issue affecting this SoC/PHY where EEE was causing the network connection to die after stressing it with iperf3 (even though much sooner). It's now possible to remove the 'eee-broken-1000t' quirk as well. Fixes: 9c15795a4f96 ("ARM: dts: meson8b-odroidc1: ethernet support") Signed-off-by: Carlo Caione <ccaione@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Diffstat (limited to 'arch/arm/boot/dts/meson8b-odroidc1.dts')
-rw-r--r--arch/arm/boot/dts/meson8b-odroidc1.dts1
1 files changed, 0 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 58669abda259..a951a6632d0c 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -221,7 +221,6 @@
/* Realtek RTL8211F (0x001cc916) */
eth_phy: ethernet-phy@0 {
reg = <0>;
- eee-broken-1000t;
interrupt-parent = <&gpio_intc>;
/* GPIOH_3 */
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;