ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 876 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
new file mode 100644
index 000000000000..df1335492a19
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
@@ -0,0 +1,876 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright (C) 2016-2018 Zodiac Inflight Innovations
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 SCU4 AIB";
+	compatible = "zii,vf610scu4-aib", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio-mux {
+		compatible = "mdio-mux-gpio";
+		pinctrl-0 = <&pinctrl_mdio_mux>;
+		pinctrl-names = "default";
+		gpios = <&gpio4 4  GPIO_ACTIVE_HIGH
+			 &gpio4 5  GPIO_ACTIVE_HIGH
+			 &gpio3 30 GPIO_ACTIVE_HIGH
+			 &gpio3 31 GPIO_ACTIVE_HIGH>;
+		mdio-parent-bus = <&mdio1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio_mux_1: mdio@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0: switch0@0 {
+				compatible = "marvell,mv88e6190";
+				reg = <0>;
+				dsa,member = <0 0>;
+				eeprom-length = <65536>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						phy-mode = "rmii";
+						ethernet = <&fec1>;
+
+						fixed-link {
+							speed = <100>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "aib2main_1";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "aib2main_2";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "eth_cu_1000_5";
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "eth_cu_1000_6";
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "eth_cu_1000_4";
+					};
+
+					port@6 {
+						reg = <6>;
+						label = "eth_cu_1000_7";
+					};
+
+					port@7 {
+						reg = <7>;
+						label = "modem_pic";
+
+						fixed-link {
+							speed = <100>;
+							full-duplex;
+						};
+					};
+
+					switch0port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xgmii";
+						link = <&switch1port10
+							&switch3port10
+							&switch2port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+
+		mdio_mux_2: mdio@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1: switch1@0 {
+				compatible = "marvell,mv88e6190";
+				reg = <0>;
+				dsa,member = <0 1>;
+				eeprom-length = <65536>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+						label = "eth_cu_1000_3";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "eth_cu_100_2";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "eth_cu_100_3";
+					};
+
+					switch1port9: port@9 {
+						reg = <9>;
+						label = "dsa";
+						phy-mode = "xgmii";
+						link = <&switch3port10
+							&switch2port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
+					};
+
+					switch1port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xgmii";
+						link = <&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+
+		mdio_mux_4: mdio@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch2: switch2@0 {
+				compatible = "marvell,mv88e6190";
+				reg = <0>;
+				dsa,member = <0 2>;
+				eeprom-length = <65536>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@2 {
+						reg = <2>;
+						label = "eth_fc_1000_2";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff1>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "eth_fc_1000_3";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff2>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "eth_fc_1000_4";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff3>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "eth_fc_1000_5";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff4>;
+					};
+
+					port@6 {
+						reg = <6>;
+						label = "eth_fc_1000_6";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff5>;
+					};
+
+					port@7 {
+						reg = <7>;
+						label = "eth_fc_1000_7";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff6>;
+					};
+
+					port@9 {
+						reg = <9>;
+						label = "eth_fc_1000_1";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff0>;
+					};
+
+					switch2port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "2500base-x";
+						link = <&switch3port9
+							&switch1port9
+							&switch0port10>;
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+
+		mdio_mux_8: mdio@8 {
+			reg = <8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch3: switch3@0 {
+				compatible = "marvell,mv88e6190";
+				reg = <0>;
+				dsa,member = <0 3>;
+				eeprom-length = <65536>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@2 {
+						reg = <2>;
+						label = "eth_fc_1000_8";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff7>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "eth_fc_1000_9";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff8>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "eth_fc_1000_10";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff9>;
+					};
+
+					switch3port9: port@9 {
+						reg = <9>;
+						label = "dsa";
+						phy-mode = "2500base-x";
+						link = <&switch2port10>;
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
+					};
+
+					switch3port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xgmii";
+						link = <&switch1port9
+							&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	sff0: sff0 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff0_i2c>;
+		los-gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff1: sff1 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff1_i2c>;
+		los-gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff2: sff2 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff2_i2c>;
+		los-gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff3: sff3 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff3_i2c>;
+		los-gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff4: sff4 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff4_i2c>;
+		los-gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff5: sff5 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff5_i2c>;
+		los-gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff6: sff6 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff6_i2c>;
+		los-gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff7: sff7 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff7_i2c>;
+		los-gpios = <&gpio9 7 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff8: sff8 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff8_i2c>;
+		los-gpios = <&gpio9 8 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff9: sff9 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff9_i2c>;
+		los-gpios = <&gpio9 9 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&dspi0 {
+	pinctrl-0 = <&pinctrl_dspi0>;
+	pinctrl-names = "default";
+	bus-num = <0>;
+	status = "okay";
+
+	adc@5 {
+		compatible = "holt,hi8435";
+		reg = <5>;
+		gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-0";
+			reg = <0x0 0x01000000>;
+		};
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-1";
+			reg = <0x0 0x01000000>;
+		};
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-sdio;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		   speed = <100>;
+		   full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	gpio5: io-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio6: io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	temp-sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+
+	elapsed-time-recorder@6b {
+		compatible = "dallas,ds1682";
+		reg = <0x6b>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+
+	adc@4a {
+		compatible = "adi,adt7411";
+		reg = <0x4a>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	gpio9: io-expander@20 {
+		compatible = "semtech,sx1503q";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sx1503_20>;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+		gpio-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	temp-sensor@4e {
+		compatible = "national,lm75";
+		reg = <0x4e>;
+	};
+
+	temp-sensor@4f {
+		compatible = "national,lm75";
+		reg = <0x4f>;
+	};
+
+	gpio7: io-expander@23 {
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x23>;
+	};
+
+	adc@4a {
+		compatible = "adi,adt7411";
+		reg = <0x4a>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		sff0_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		sff1_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		sff2_i2c: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		sff3_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		sff4_i2c: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		pinctrl-names = "default";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		sff5_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		sff6_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		sff7_i2c: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		sff8_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		sff9_i2c: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+	};
+};
+
+&snvsrtc {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dspi0: dspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTB19__DSPI0_CS0		0x1182
+			VF610_PAD_PTB18__DSPI0_CS1		0x1182
+			VF610_PAD_PTB13__DSPI0_CS4		0x1182
+			VF610_PAD_PTB12__DSPI0_CS5		0x1182
+			VF610_PAD_PTB20__DSPI0_SIN		0x1181
+			VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+			VF610_PAD_PTB22__DSPI0_SCK		0x1182
+		>;
+	};
+
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTD4__DSPI1_CS1		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_dspi2: dspi2gpio {
+		fsl,pins = <
+			VF610_PAD_PTD30__GPIO_64		0x33e2
+			VF610_PAD_PTD29__GPIO_65		0x33e1
+			VF610_PAD_PTD28__GPIO_66		0x33e2
+			VF610_PAD_PTD27__GPIO_67		0x33e2
+			VF610_PAD_PTD26__GPIO_68		0x31c2
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			VF610_PAD_PTA22__I2C2_SCL		0x37ff
+			VF610_PAD_PTA23__I2C2_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			 VF610_PAD_PTB26__GPIO_96		0x31c2
+		   >;
+	};
+
+	pinctrl_mdio_mux: pinctrl-mdio-mux {
+		fsl,pins = <
+			VF610_PAD_PTE27__GPIO_132		0x31c2
+			VF610_PAD_PTE28__GPIO_133		0x31c2
+			VF610_PAD_PTE21__GPIO_126		0x31c2
+			VF610_PAD_PTE22__GPIO_127		0x31c2
+		>;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTD7__QSPI0_B_QSCK		0x31c3
+			VF610_PAD_PTD8__QSPI0_B_CS0		0x31ff
+			VF610_PAD_PTD9__QSPI0_B_DATA3		0x31c3
+			VF610_PAD_PTD10__QSPI0_B_DATA2		0x31c3
+			VF610_PAD_PTD11__QSPI0_B_DATA1		0x31c3
+			VF610_PAD_PTD12__QSPI0_B_DATA0		0x31c3
+		>;
+	};
+
+	pinctrl_sx1503_20: pinctrl-sx1503-20 {
+		fsl,pins = <
+			VF610_PAD_PTD31__GPIO_63		0x219d
+			>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB23__UART1_TX		0x21a2
+			VF610_PAD_PTB24__UART1_RX		0x21a1
+			VF610_PAD_PTB25__UART1_RTS		0x21a2	/* Used as DE signal for the RS-485 transceiver */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__UART2_TX		0x21a2
+			VF610_PAD_PTD1__UART2_RX		0x21a1
+			VF610_PAD_PTD2__UART2_RTS		0x21a2 /* Used as DE signal for the RS-485 transceiver */
+		>;
+	};
+};