summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap3-cm-t3x.dtsi
diff options
context:
space:
mode:
authorDmitry Lifshitz <lifshitz@compulab.co.il>2014-01-12 17:22:45 +0400
committerTony Lindgren <tony@atomide.com>2014-03-01 02:09:08 +0400
commitd234e423993faa3c58df057484fc5a45e1b577f5 (patch)
tree14d22d1f9eb7cda0c21ec56f9a2ab14c171f4fce /arch/arm/boot/dts/omap3-cm-t3x.dtsi
parentfb5f895fd303b2609a78bf553c954e1df1d6d16d (diff)
downloadlinux-d234e423993faa3c58df057484fc5a45e1b577f5.tar.xz
ARM: dts: sbc-t3x: refactor DT support
Refactor the sbc-t3x device tree as a preparation for additional (sbc-t3530, sbc-t3517, etc.) boards support. No functional changes. The device tree will have the following structure: omap3-cm-t3x.dtsi | |<-- omap3-cm-t3x30.dtsi | | | | | | ----- ------- ------------ | | | CoM | | Board | | Base board | | | ----- ------- ------------ | | omap3-sb-t35.dtsi | | | | |<-- omap3-cm-t3730.dts <-- omap3-sbc-t3730.dts -->| | | | | |<-- omap3-cm-t3530.dts <-- omap3-sbc-t3530.dts -->| | | |<-------- omap3-cm-t3517.dts <-- omap3-sbc-t3517.dts -->| Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/boot/dts/omap3-cm-t3x.dtsi')
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3x.dtsi60
1 files changed, 60 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
new file mode 100644
index 000000000000..ca6090d422e2
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Common support for CompuLab CM-T3x CoMs
+ */
+
+/ {
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ ledb {
+ label = "cm-t3x:green";
+ gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&omap3_pmx_core {
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ bus-width = <4>;
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};