summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
diff options
context:
space:
mode:
authorBrian Masney <masneyb@onstation.org>2018-11-01 03:11:49 +0300
committerAndy Gross <andy.gross@linaro.org>2019-01-23 00:04:50 +0300
commitfb143fcbb9ad361004f2818e9dcb52b2556bfec1 (patch)
treebc8cf54aa5ddc196d6067562dda85534b9a92c82 /arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
parentcdd3d64d843a2a4c658a182b744bfefbd021d542 (diff)
downloadlinux-fb143fcbb9ad361004f2818e9dcb52b2556bfec1.tar.xz
ARM: dts: qcom: msm8974-hammerhead: add USB OTG support
Add the device tree bindings for USB OTG support. Driver was tested using on a LG Nexus 5 (hammerhead) phone. This patch is based on work from Jonathan Marek and from the other msm8974 devices. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts')
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts60
1 files changed, 60 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 5cf9c7e20f2e..b3b04736a159 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -270,6 +270,16 @@
};
};
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
i2c3_pins: i2c3 {
mux {
pins = "gpio10", "gpio11";
@@ -396,6 +406,24 @@
};
};
+ i2c@f9923000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <100000>;
+ qcom,src-freq = <50000000>;
+
+ charger: bq24192@6b {
+ compatible = "ti,bq24192";
+ reg = <0x6b>;
+ interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
+
+ omit-battery-class;
+
+ usb_otg_vbus: usb-otg-vbus { };
+ };
+ };
+
i2c@f9925000 {
status = "ok";
pinctrl-names = "default";
@@ -413,6 +441,31 @@
amstaos,proximity-diodes = <0>;
};
};
+
+ usb@f9a55000 {
+ status = "ok";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+
+ extcon = <&charger>, <&usb_id>;
+ vbus-supply = <&usb_otg_vbus>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "ok";
+
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+ };
+ };
+ };
};
&spmi_bus {
@@ -441,6 +494,13 @@
bias-disable;
power-source = <PM8941_GPIO_S3>;
};
+
+ otg {
+ gpio-hog;
+ gpios = <35 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "otg-gpio";
+ };
};
};
};