summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/qcom-pm8941.dtsi
diff options
context:
space:
mode:
authorStephen Boyd <sboyd@codeaurora.org>2015-11-26 01:27:36 +0300
committerAndy Gross <andy.gross@linaro.org>2016-02-24 08:52:25 +0300
commit65d4e83e340421b93739a660282d773d895be57d (patch)
tree15ca5173f1ee2f98a5cd8bdabab7d5f91273e2a7 /arch/arm/boot/dts/qcom-pm8941.dtsi
parentb32e592d3c28f10dc4fd2d55dd14d47deb5f8532 (diff)
downloadlinux-65d4e83e340421b93739a660282d773d895be57d.tar.xz
ARM: dts: qcom: Remove size elements from pmic reg properties
The #size-cells for the pmics are 0, but we specify a size in the reg property so that MPP and GPIO modules can figure out how many pins there are. Now that we've done that by counting irqs, we can remove the size elements in the reg properties and be DT compliant. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/qcom-pm8941.dtsi')
-rw-r--r--arch/arm/boot/dts/qcom-pm8941.dtsi20
1 files changed, 10 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index ca53a5947437..d95edb6f6265 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -12,15 +12,15 @@
rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000 0x100>,
- <0x6100 0x100>;
+ reg = <0x6000>,
+ <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
pwrkey@800 {
compatible = "qcom,pm8941-pwrkey";
- reg = <0x800 0x100>;
+ reg = <0x800>;
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
@@ -28,7 +28,7 @@
charger@1000 {
compatible = "qcom,pm8941-charger";
- reg = <0x1000 0x700>;
+ reg = <0x1000>;
interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
@@ -49,7 +49,7 @@
pm8941_gpios: gpios@c000 {
compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
- reg = <0xc000 0x2400>;
+ reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
@@ -92,7 +92,7 @@
pm8941_mpps: mpps@a000 {
compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
- reg = <0xa000 0x800>;
+ reg = <0xa000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
@@ -107,7 +107,7 @@
pm8941_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
- reg = <0x2400 0x100>;
+ reg = <0x2400>;
interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
io-channel-names = "thermal";
@@ -116,7 +116,7 @@
pm8941_vadc: vadc@3100 {
compatible = "qcom,spmi-vadc";
- reg = <0x3100 0x100>;
+ reg = <0x3100>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
@@ -141,7 +141,7 @@
pm8941_iadc: iadc@3600 {
compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
- reg = <0x3600 0x100>;
+ reg = <0x3600>;
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
qcom,external-resistor-micro-ohms = <10000>;
};
@@ -161,7 +161,7 @@
pm8941_wled: wled@d800 {
compatible = "qcom,pm8941-wled";
- reg = <0xd800 0x100>;
+ reg = <0xd800>;
label = "backlight";
status = "disabled";