summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/qcom-pma8084.dtsi
diff options
context:
space:
mode:
authorAndy Gross <andy.gross@linaro.org>2016-05-19 08:00:19 +0300
committerAndy Gross <andy.gross@linaro.org>2016-06-12 06:57:14 +0300
commita537b8d68e0b6b67ee370f9710c94bfb813b3612 (patch)
treeb9f698c4ffaaad4d9eab92ad59e33238e6a55f23 /arch/arm/boot/dts/qcom-pma8084.dtsi
parent5fda09b809c20080f5194199bdb6012b774b393e (diff)
downloadlinux-a537b8d68e0b6b67ee370f9710c94bfb813b3612.tar.xz
ARM: dts: qcom: Remove size elements from pmic reg
The #size-cells for the pmics are 0, but we specify a size in the reg property so that MPP and GPIO modules can figure out how many pins there are. Now that we've done that by counting irqs, we can remove the size elements in the reg properties and be DT compliant. Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/qcom-pma8084.dtsi')
-rw-r--r--arch/arm/boot/dts/qcom-pma8084.dtsi12
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index 4e9bd3f88473..ea7fce389035 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -12,15 +12,15 @@
rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000 0x100>,
- <0x6100 0x100>;
+ reg = <0x6000>,
+ <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
pma8084_gpios: gpios@c000 {
compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
- reg = <0xc000 0x1600>;
+ reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
@@ -49,7 +49,7 @@
pma8084_mpps: mpps@a000 {
compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
- reg = <0xa000 0x800>;
+ reg = <0xa000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
@@ -64,7 +64,7 @@
pma8084_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
- reg = <0x2400 0x100>;
+ reg = <0x2400>;
interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <0>;
io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
@@ -73,7 +73,7 @@
pma8084_vadc: vadc@3100 {
compatible = "qcom,spmi-vadc";
- reg = <0x3100 0x100>;
+ reg = <0x3100>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;