summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/rk3288-r89.dts
diff options
context:
space:
mode:
authorAndy Yan <andy.yan@rock-chips.com>2016-10-22 15:54:55 +0300
committerHeiko Stuebner <heiko@sntech.de>2017-01-02 16:25:19 +0300
commite9e79d5395b2e60a03811073e0aedfbd7fa0bc57 (patch)
tree66bd0f9c70966329417d60723549c8b894b7b596 /arch/arm/boot/dts/rk3288-r89.dts
parent0af13f7063a6ffc94c905ffc8c5f324f91e5843a (diff)
downloadlinux-e9e79d5395b2e60a03811073e0aedfbd7fa0bc57.tar.xz
ARM: dts: rockchip: use pin constants to describe gpios
Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Diffstat (limited to 'arch/arm/boot/dts/rk3288-r89.dts')
-rw-r--r--arch/arm/boot/dts/rk3288-r89.dts14
1 files changed, 7 insertions, 7 deletions
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 04faa72dbd95..1145b62edde7 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -68,7 +68,7 @@
pinctrl-0 = <&pwrbtn>;
power {
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@@ -79,7 +79,7 @@
ir: ir-receiver {
compatible = "gpio-ir-receiver";
- gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
@@ -87,7 +87,7 @@
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -98,7 +98,7 @@
vcc_otg: vcc-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg";
@@ -111,7 +111,7 @@
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
@@ -134,7 +134,7 @@
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;
@@ -187,7 +187,7 @@
#clock-cells = <0>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
};