summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/sama5d3.dtsi
diff options
context:
space:
mode:
authorBoris Brezillon <boris.brezillon@free-electrons.com>2017-05-30 12:20:53 +0300
committerAlexandre Belloni <alexandre.belloni@free-electrons.com>2017-05-31 12:55:41 +0300
commit1004a2977bdc7566bca87c565541c3232ed467c4 (patch)
treeff3d3aca77c0e3288c6296263dd0795e60680478 /arch/arm/boot/dts/sama5d3.dtsi
parentd9c41bf30cf8cea379f5947624e76c893791fec0 (diff)
downloadlinux-1004a2977bdc7566bca87c565541c3232ed467c4.tar.xz
ARM: dts: at91: Switch to the new NAND bindings
Use the new EBI/NAND bindings to declare NAND chips and remove old NAND nodes along the way. Note that we keep using old bindings in at91rm9200.dtsi because this SoC is not supported by the EBI driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/sama5d3.dtsi')
-rw-r--r--arch/arm/boot/dts/sama5d3.dtsi32
1 files changed, 0 insertions, 32 deletions
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 3925f83f58a6..554d0bdedc7a 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1569,38 +1569,6 @@
};
};
- nand0: nand@60000000 {
- compatible = "atmel,at91rm9200-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- reg = < 0x60000000 0x01000000 /* EBI CS3 */
- 0xffffc070 0x00000490 /* SMC PMECC regs */
- 0xffffc500 0x00000100 /* SMC PMECC Error Location regs */
- 0x00110000 0x00018000 /* ROM code */
- >;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
- atmel,nand-addr-offset = <21>;
- atmel,nand-cmd-offset = <22>;
- atmel,nand-has-dma;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand0_ale_cle>;
- atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
- status = "disabled";
-
- nfc@70000000 {
- compatible = "atmel,sama5d3-nfc";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <
- 0x70000000 0x08000000 /* NFC Command Registers */
- 0xffffc000 0x00000070 /* NFC HSMC regs */
- 0x00200000 0x00100000 /* NFC SRAM banks */
- >;
- clocks = <&hsmc_clk>;
- };
- };
-
nfc_io: nfc-io@70000000 {
compatible = "atmel,sama5d3-nfc-io", "syscon";
reg = <0x70000000 0x8000000>;