diff options
author | Maxime Ripard <maxime.ripard@free-electrons.com> | 2015-01-31 14:11:54 +0300 |
---|---|---|
committer | Maxime Ripard <maxime.ripard@free-electrons.com> | 2015-04-27 09:20:21 +0300 |
commit | 6f1b57f57d4dfc8033763c02d4e17131d1aa08ab (patch) | |
tree | 8ed97c5ce89fc0c74686a2e4476d8ad9e9eb5ef6 /arch/arm/boot/dts/sun6i-a31-colombus.dts | |
parent | df839aeb8042e5041dd4bba8acc5e8332cb3e5bc (diff) | |
download | linux-6f1b57f57d4dfc8033763c02d4e17131d1aa08ab.tar.xz |
ARM: sun6i: colombus: Convert to DT label based syntax
In order to lessen the amount of duplication of the DT tree, ease the
new and follow the trend that prefers to use label based references
when overriding DTSI nodes, convert the board to this syntax
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/sun6i-a31-colombus.dts')
-rw-r--r-- | arch/arm/boot/dts/sun6i-a31-colombus.dts | 120 |
1 files changed, 59 insertions, 61 deletions
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 84630e56acd7..d6e925c381a3 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -61,76 +61,74 @@ chosen { bootargs = "earlyprintk console=ttyS0,115200"; }; +}; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - usbphy: phy@01c19400 { - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "fail"; +}; - ehci1: usb@01c1b000 { - status = "okay"; - }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - pio: pinctrl@01c20800 { - mmc0_pins_a: mmc0@0 { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - mmc0_cd_pin_colombus: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; - usb2_vbus_pin_colombus: usb2_vbus_pin@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; +&mmc0_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; +&pio { + mmc0_cd_pin_colombus: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "fail"; - }; + usb2_vbus_pin_colombus: usb2_vbus_pin@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; +®_usb2_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_colombus>; + gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; - }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin_colombus>; - gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +&usbphy { + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; |