summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
diff options
context:
space:
mode:
authorChen-Yu Tsai <wens@csie.org>2016-11-16 18:42:32 +0300
committerMaxime Ripard <maxime.ripard@free-electrons.com>2016-11-22 17:34:09 +0300
commit0fa1c17c162f9a5f5ca8b244f7bad7fd0aa7bc60 (patch)
tree719aa7a1e3d235fb62c13fbf462cdeead10fb8a3 /arch/arm/boot/dts/sun6i-a31-hummingbird.dts
parent9bfe7c8d1af5a8a55a21b5407e1a35ed3c1b98eb (diff)
downloadlinux-0fa1c17c162f9a5f5ca8b244f7bad7fd0aa7bc60.tar.xz
ARM: dts: sun6i: hummingbird-a31: Enable display output through VGA bridge
The Hummingbird A31 board has a VGA DAC which converts RGB output from the LCD interface to VGA analog signals. Add nodes for the VGA DAC, its power supply, and enable this part of the display pipeline. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/sun6i-a31-hummingbird.dts')
-rw-r--r--arch/arm/boot/dts/sun6i-a31-hummingbird.dts67
1 files changed, 67 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 4e0516026596..735914f6ae44 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -63,6 +63,60 @@
stdout-path = "serial0:115200n8";
};
+ vga-connector {
+ compatible = "vga-connector";
+
+ port {
+ vga_con_in: endpoint {
+ remote-endpoint = <&vga_dac_out>;
+ };
+ };
+ };
+
+ vga-dac {
+ compatible = "dumb-vga-dac";
+ vdd-supply = <&reg_vga_3v3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ vga_dac_in: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_vga>;
+ };
+ };
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ vga_dac_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+ };
+
+ reg_vga_3v3: vga_3v3_regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vga-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
@@ -258,6 +312,19 @@
status = "okay";
};
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd0_rgb888_pins>;
+ status = "okay";
+};
+
+&tcon0_out {
+ tcon0_out_vga: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vga_dac_in>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;