diff options
author | Tuomas Tynkkynen <tuomas@tuxera.com> | 2017-12-22 23:57:37 +0300 |
---|---|---|
committer | Maxime Ripard <maxime.ripard@bootlin.com> | 2018-02-13 11:37:22 +0300 |
commit | 45e01f401a2a16a8d7ca910fe01c124451980bd8 (patch) | |
tree | f18e6a5308ef03cce298d440115fb8d893463618 /arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | |
parent | 88c23c05ef18f543fad7b26c95a3acc0ffb378cc (diff) | |
download | linux-45e01f401a2a16a8d7ca910fe01c124451980bd8.tar.xz |
ARM: dts: sunxi: Switch MMC nodes away from cd-inverted property
Using the cd-inverted property is not useful when GPIOs are used as card
detects since the polarity can be specified with the usual
GPIO_ACTIVE_(HIGH|LOW) GPIO flags. It has also caused confusion for
U-Boot developers, so migrate all sunxi boards away from cd-inverted.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Diffstat (limited to 'arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts')
-rw-r--r-- | arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 3 |
1 files changed, 1 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index 7f8405a0dd0f..ff5c1086585c 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -123,8 +123,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; |