diff options
author | Lukasz Majewski <lukma@denx.de> | 2019-07-31 17:11:51 +0300 |
---|---|---|
committer | Shawn Guo <shawnguo@kernel.org> | 2019-08-03 18:53:24 +0300 |
commit | a5580eb394c8a48afc3e64aaad68db0d44662cc6 (patch) | |
tree | 56a3d493ce6a7952a7d7e439e31aafda9d9ef8bb /arch/arm/boot/dts/vf610-bk4.dts | |
parent | 8d0148473dece51675d11dd59b8db5fe4b5d2e7e (diff) | |
download | linux-a5580eb394c8a48afc3e64aaad68db0d44662cc6.tar.xz |
ARM: dts: vf610-bk4: Fix qspi node description
Before this change the device tree description of qspi node for
second memory on BK4 board was wrong (applicable to old, removed
fsl-quadspi.c driver).
As a result this memory was not recognized correctly when used
with the new spi-fsl-qspi.c driver.
From the dt-bindings:
"Required SPI slave node properties:
- reg: There are two buses (A and B) with two chip selects each.
This encodes to which bus and CS the flash is connected:
<0>: Bus A, CS 0
<1>: Bus A, CS 1
<2>: Bus B, CS 0
<3>: Bus B, CS 1"
According to above with new driver the second SPI-NOR memory shall
have reg=<2> as it is connected to Bus B, CS 0.
Fixes: a67d2c52a82f ("ARM: dts: Add support for Liebherr's BK4 device (vf610 based)")
Suggested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/vf610-bk4.dts')
-rw-r--r-- | arch/arm/boot/dts/vf610-bk4.dts | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts index 3fa0cbe456db..0f3870d3b099 100644 --- a/arch/arm/boot/dts/vf610-bk4.dts +++ b/arch/arm/boot/dts/vf610-bk4.dts @@ -246,13 +246,13 @@ reg = <0>; }; - n25q128a13_2: flash@1 { + n25q128a13_2: flash@2 { compatible = "n25q128a13", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <66000000>; spi-rx-bus-width = <2>; - reg = <1>; + reg = <2>; }; }; |