Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

1 files changed, 153 insertions, 5 deletions

diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index c8047ca16501..7dd1d6ede525 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -34,12 +34,70 @@
 		};
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vcc_3v3_mcu: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vcc_3v3_mcu";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			master-clkdir-out;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
 };
 
 &dspi0 {
 	bus-num = <0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_dspi0_1>;
+	pinctrl-0 = <&pinctrl_dspi0>;
 	status = "okay";
 
 	sflash: at26df081a@0 {
@@ -56,26 +114,116 @@
 &fec0 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec0_1>;
+	pinctrl-0 = <&pinctrl_fec0>;
 	status = "okay";
 };
 
 &fec1 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1_1>;
+	pinctrl-0 = <&pinctrl_fec1>;
 	status = "okay";
 };
 
 &i2c0 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c0_1>;
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+	       #sound-dai-cells = <0>;
+	       compatible = "fsl,sgtl5000";
+	       reg = <0x0a>;
+	       VDDA-supply = <&reg_3p3v>;
+	       VDDIO-supply = <&reg_3p3v>;
+	       clocks = <&clks VF610_CLK_SAI2>;
+       };
+};
+
+&iomuxc {
+	vf610-twr {
+		pinctrl_adc0_ad5: adc0ad5grp {
+			fsl,pins = <
+				VF610_PAD_PTC30__ADC0_SE5		0xa1
+			>;
+		};
+
+		pinctrl_dspi0: dspi0grp {
+			fsl,pins = <
+				VF610_PAD_PTB19__DSPI0_CS0		0x1182
+				VF610_PAD_PTB20__DSPI0_SIN		0x1181
+				VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+				VF610_PAD_PTB22__DSPI0_SCK		0x1182
+			>;
+		};
+
+		pinctrl_fec0: fec0grp {
+			fsl,pins = <
+				VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+				VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
+				VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
+				VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
+				VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
+				VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
+				VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
+				VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
+				VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
+				VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_i2c0: i2c0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__I2C0_SCL		0x30d3
+				VF610_PAD_PTB15__I2C0_SDA		0x30d3
+			>;
+		};
+
+		pinctrl_sai2: sai2grp {
+			fsl,pins = <
+				VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
+				VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
+				VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
+				VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
+				VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
+				VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
+				VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+	};
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
 	status = "okay";
 };
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };