summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
diff options
context:
space:
mode:
authorAndrew Lunn <andrew@lunn.ch>2016-10-16 20:56:53 +0300
committerDavid S. Miller <davem@davemloft.net>2016-10-17 18:18:09 +0300
commitf283745b3caffcbc69ca71b7b22a9d3c2054284f (patch)
tree411be33c45d2f53b2c09e573062f5039cdf41b9f /arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
parentae0219cb441cf5f471feb90961b1e93a91ba6db6 (diff)
downloadlinux-f283745b3caffcbc69ca71b7b22a9d3c2054284f.tar.xz
arm: vf610: zii devel b: Add support for switch interrupts
The Switches use GPIO lines to indicate interrupts from two of the switches. With these interrupts in place, we can make use of the interrupt controllers within the switch to indicate when the internal PHYs generate an interrupt. Use standard PHY properties to do this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch/arm/boot/dts/vf610-zii-dev-rev-b.dts')
-rw-r--r--arch/arm/boot/dts/vf610-zii-dev-rev-b.dts51
1 files changed, 51 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 5c1fcab4a6f7..1552db00cc59 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -88,10 +88,16 @@
switch0: switch0@0 {
compatible = "marvell,mv88e6085";
+ pinctrl-0 = <&pinctrl_gpio_switch0>;
+ pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
dsa,member = <0 0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
ports {
#address-cells = <1>;
@@ -99,16 +105,19 @@
port@0 {
reg = <0>;
label = "lan0";
+ phy-handle = <&switch0phy0>;
};
port@1 {
reg = <1>;
label = "lan1";
+ phy-handle = <&switch0phy1>;
};
port@2 {
reg = <2>;
label = "lan2";
+ phy-handle = <&switch0phy2>;
};
switch0port5: port@5 {
@@ -133,6 +142,24 @@
};
};
};
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch0phy0: switch0phy0@0 {
+ reg = <0>;
+ interrupt-parent = <&switch0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ switch0phy1: switch1phy0@1 {
+ reg = <1>;
+ interrupt-parent = <&switch0>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; };
+ switch0phy2: switch1phy0@2 {
+ reg = <2>;
+ interrupt-parent = <&switch0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
};
};
@@ -143,10 +170,16 @@
switch1: switch1@0 {
compatible = "marvell,mv88e6085";
+ pinctrl-0 = <&pinctrl_gpio_switch1>;
+ pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
dsa,member = <0 1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
ports {
#address-cells = <1>;
@@ -196,12 +229,18 @@
#size-cells = <0>;
switch1phy0: switch1phy0@0 {
reg = <0>;
+ interrupt-parent = <&switch1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
switch1phy1: switch1phy0@1 {
reg = <1>;
+ interrupt-parent = <&switch1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
switch1phy2: switch1phy0@2 {
reg = <2>;
+ interrupt-parent = <&switch1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
@@ -636,6 +675,18 @@
>;
};
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ fsl,pins = <
+ VF610_PAD_PTB5__GPIO_27 0x219d
+ >;
+ };
+
+ pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
+ fsl,pins = <
+ VF610_PAD_PTB4__GPIO_26 0x219d
+ >;
+ };
+
pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
fsl,pins = <
VF610_PAD_PTE14__GPIO_119 0x31c2