diff options
| author | Christoph Niedermaier <cniedermaier@dh-electronics.com> | 2023-05-02 14:14:24 +0300 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2023-05-14 15:59:12 +0300 |
| commit | 892943d7729bbfb2edeed9e323eba9a5cec21c49 (patch) | |
| tree | 4fe73a21273b1ea36ade7838b5ecc9b56da3c1df /arch/arm/boot | |
| parent | f161cea5a20f3aeeb637a88ad1705fc2720b4d58 (diff) | |
| download | linux-892943d7729bbfb2edeed9e323eba9a5cec21c49.tar.xz | |
ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3
According to Renesas Electronics (formerly Dialog Semiconductor), the
standard AUTO mode of the PMIC DA9061 can lead to stability problems
depending on the hardware revision. It is recommended to set a defined
mode such as PFM or PWM permanently. So set and limit the mode for
buck 1, 2 and 3 to a fixed one.
Fixes: 611b6c891e40 ("ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot')
| -rw-r--r-- | arch/arm/boot/dts/imx6ull-dhcor-som.dtsi | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi index 5882c7565f64..32a6022625d9 100644 --- a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi +++ b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/regulator/dlg,da9063-regulator.h> #include "imx6ull.dtsi" / { @@ -84,16 +85,20 @@ regulators { vdd_soc_in_1v4: buck1 { + regulator-allowed-modes = <DA9063_BUCK_MODE_SLEEP>; /* PFM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = <DA9063_BUCK_MODE_SLEEP>; regulator-max-microvolt = <1400000>; regulator-min-microvolt = <1400000>; regulator-name = "vdd_soc_in_1v4"; }; vcc_3v3: buck2 { + regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; regulator-name = "vcc_3v3"; @@ -106,8 +111,10 @@ * the voltage is set to 1.5V. */ vcc_ddr_1v35: buck3 { + regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-max-microvolt = <1500000>; regulator-min-microvolt = <1500000>; regulator-name = "vcc_ddr_1v35"; |