Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 142 deletions

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index c8cbd9a30791..4316e1370627 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -14,21 +14,10 @@ menuconfig ARCH_DAVINCI
 
 if ARCH_DAVINCI
 
-config ARCH_DAVINCI_DMx
-	bool
-
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI_DM355
-	bool "DaVinci 355 based system"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
-	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
-	depends on ATAGS
 	select ARCH_DAVINCI_DA8XX
 	# needed on silicon revs 1.0, 1.1:
 	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
@@ -36,142 +25,11 @@ config ARCH_DAVINCI_DA830
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
-	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
-	depends on ATAGS
-	select ARCH_DAVINCI_DA8XX
 	select DAVINCI_CP_INTC
 
 config ARCH_DAVINCI_DA8XX
 	bool
 
-config ARCH_DAVINCI_DM365
-	bool "DaVinci 365 based system"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
-comment "DaVinci Board Type"
-
-config MACH_DA8XX_DT
-	bool "Support DA8XX platforms using device tree"
-	default y
-	depends on ARCH_DAVINCI_DA850
-	select PINCTRL
-	help
-	  Say y here to include support for TI DaVinci DA850 based using
-	  Flattened Device Tree. More information at Documentation/devicetree
-
-config MACH_DAVINCI_DM355_EVM
-	bool "TI DM355 EVM"
-	default ARCH_DAVINCI_DM355
-	depends on ARCH_DAVINCI_DM355
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM355 EVM
-
-config MACH_DM355_LEOPARD
-	bool "DM355 Leopard board"
-	depends on ARCH_DAVINCI_DM355
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM355 Leopard board.
-
-config MACH_DAVINCI_DM365_EVM
-	bool "TI DM365 EVM"
-	default ARCH_DAVINCI_DM365
-	depends on ARCH_DAVINCI_DM365
-	help
-	  Configure this option to specify whether the board used
-	  for development is a DM365 EVM
-
-config MACH_DAVINCI_DA830_EVM
-	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
-	default ARCH_DAVINCI_DA830
-	depends on ATAGS && UNUSED_BOARD_FILES
-	depends on ARCH_DAVINCI_DA830
-	select GPIO_PCF857X if I2C
-	help
-	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
-
-choice
-	prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
-	depends on MACH_DAVINCI_DA830_EVM
-	help
-	  The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
-	  detected automatically based on successful probe of the I2C
-	  based GPIO expander on that board. This option selected in this
-	  menu has an effect only in case of a successful UI card detection.
-
-config DA830_UI_LCD
-	bool "LCD"
-	help
-	  Say Y here to use the LCD as a framebuffer or simple character
-	  display.
-
-config DA830_UI_NAND
-	bool "NAND flash"
-	help
-	  Say Y here to use the NAND flash. Do not forget to setup
-	  the switch correctly.
-endchoice
-
-config MACH_DAVINCI_DA850_EVM
-	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	default ARCH_DAVINCI_DA850
-	depends on ARCH_DAVINCI_DA850
-	help
-	  Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
-
-choice
-	prompt "Select peripherals connected to expander on UI board"
-	depends on MACH_DAVINCI_DA850_EVM
-	help
-	  The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
-	  EVM is detected automatically based on successful probe of the I2C
-	  based GPIO expander on that card. This option selected in this
-	  menu has an effect only in case of a successful UI card detection.
-
-config DA850_UI_NONE
-	bool "No peripheral is enabled"
-	help
-	  Say Y if you do not want to enable any of the peripherals connected
-	  to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
-
-config DA850_UI_RMII
-	bool "RMII Ethernet PHY"
-	help
-	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
-	  EVM. This PHY is found on the UI daughter card that is supplied with
-	  the EVM.
-	  NOTE: Please take care while choosing this option, MII PHY will
-	  not be functional if RMII mode is selected.
-
-config DA850_UI_SD_VIDEO_PORT
-	bool "Video Port Interface"
-	help
-	  Say Y if you want to use Video Port Interface (VPIF) on the
-	  DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
-	  UI daughter card that is supplied with the EVM.
-
-endchoice
-
-config MACH_MITYOMAPL138
-	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
-	depends on ARCH_DAVINCI_DA850
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
-	  System on Module.  Information on this SoM may be found at
-	  https://www.mitydsp.com
-
-config MACH_OMAPL138_HAWKBOARD
-	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
-	depends on ARCH_DAVINCI_DA850
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
-
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI