Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 303 deletions

diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
deleted file mode 100644
index 199c26d9a2b6..000000000000
--- a/arch/arm/mach-davinci/devices.c
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * mach-davinci/devices.c
- *
- * DaVinci platform device setup/initialization
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/edma.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include "hardware.h"
-#include "cputype.h"
-#include "mux.h"
-#include "davinci.h"
-#include "irqs.h"
-
-#define DAVINCI_I2C_BASE	     0x01C21000
-#define DAVINCI_ATA_BASE	     0x01C66000
-#define DAVINCI_MMCSD0_BASE	     0x01E10000
-#define DM355_MMCSD0_BASE	     0x01E11000
-#define DM355_MMCSD1_BASE	     0x01E00000
-#define DM365_MMCSD0_BASE	     0x01D11000
-#define DM365_MMCSD1_BASE	     0x01D00000
-
-void __iomem  *davinci_sysmod_base;
-
-void davinci_map_sysmod(void)
-{
-	davinci_sysmod_base = ioremap(DAVINCI_SYSTEM_MODULE_BASE,
-					      0x800);
-	/*
-	 * Throw a bug since a lot of board initialization code depends
-	 * on system module availability. ioremap() failing this early
-	 * need careful looking into anyway.
-	 */
-	BUG_ON(!davinci_sysmod_base);
-}
-
-static struct resource i2c_resources[] = {
-	{
-		.start		= DAVINCI_I2C_BASE,
-		.end		= DAVINCI_I2C_BASE + 0x40,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_I2C),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_i2c_device = {
-	.name           = "i2c_davinci",
-	.id             = 1,
-	.num_resources	= ARRAY_SIZE(i2c_resources),
-	.resource	= i2c_resources,
-};
-
-void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
-{
-	if (cpu_is_davinci_dm644x())
-		davinci_cfg_reg(DM644X_I2C);
-
-	davinci_i2c_device.dev.platform_data = pdata;
-	(void) platform_device_register(&davinci_i2c_device);
-}
-
-static struct resource ide_resources[] = {
-	{
-		.start		= DAVINCI_ATA_BASE,
-		.end		= DAVINCI_ATA_BASE + 0x7ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_IDE),
-		.end		= DAVINCI_INTC_IRQ(IRQ_IDE),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_device = {
-	.name           = "palm_bk3710",
-	.id             = -1,
-	.resource       = ide_resources,
-	.num_resources  = ARRAY_SIZE(ide_resources),
-	.dev = {
-		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-void __init davinci_init_ide(void)
-{
-	if (cpu_is_davinci_dm644x()) {
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN);
-		davinci_cfg_reg(DM644X_HDIREN);
-	} else if (cpu_is_davinci_dm646x()) {
-		/* IRQ_DM646X_IDE is the same as IRQ_IDE */
-		davinci_cfg_reg(DM646X_ATAEN);
-	} else {
-		WARN_ON(1);
-		return;
-	}
-
-	platform_device_register(&ide_device);
-}
-
-#if IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd0_resources[] = {
-	{
-		/* different on dm355 */
-		.start = DAVINCI_MMCSD0_BASE,
-		.end   = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	/* IRQs:  MMC/SD, then SDIO */
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_MMCINT),
-		.flags = IORESOURCE_IRQ,
-	}, {
-		/* different on dm355 */
-		.start = DAVINCI_INTC_IRQ(IRQ_SDIOINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_mmcsd0_device = {
-	.name = "dm6441-mmc",
-	.id = 0,
-	.dev = {
-		.dma_mask = &mmcsd0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(mmcsd0_resources),
-	.resource = mmcsd0_resources,
-};
-
-static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd1_resources[] = {
-	{
-		.start = DM355_MMCSD1_BASE,
-		.end   = DM355_MMCSD1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	/* IRQs:  MMC/SD, then SDIO */
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_MMCINT1),
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_SDIOINT1),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_mmcsd1_device = {
-	.name = "dm6441-mmc",
-	.id = 1,
-	.dev = {
-		.dma_mask = &mmcsd1_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(mmcsd1_resources),
-	.resource = mmcsd1_resources,
-};
-
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-	struct platform_device	*pdev = NULL;
-
-	if (WARN_ON(cpu_is_davinci_dm646x()))
-		return;
-
-	/* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
-	 * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
-	 *
-	 * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
-	 * not handled right here ...
-	 */
-	switch (module) {
-	case 1:
-		if (cpu_is_davinci_dm355()) {
-			/* REVISIT we may not need all these pins if e.g. this
-			 * is a hard-wired SDIO device...
-			 */
-			davinci_cfg_reg(DM355_SD1_CMD);
-			davinci_cfg_reg(DM355_SD1_CLK);
-			davinci_cfg_reg(DM355_SD1_DATA0);
-			davinci_cfg_reg(DM355_SD1_DATA1);
-			davinci_cfg_reg(DM355_SD1_DATA2);
-			davinci_cfg_reg(DM355_SD1_DATA3);
-		} else if (cpu_is_davinci_dm365()) {
-			/* Configure pull down control */
-			unsigned v;
-
-			v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-			__raw_writel(v & ~0xfc0,
-					DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-
-			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
-			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
-							SZ_4K - 1;
-			mmcsd1_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM365_SDIOINT1);
-			davinci_mmcsd1_device.name = "da830-mmc";
-		} else
-			break;
-
-		pdev = &davinci_mmcsd1_device;
-		break;
-	case 0:
-		if (cpu_is_davinci_dm355()) {
-			mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
-			mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
-			mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM355_SDIOINT0);
-
-			/* expose all 6 MMC0 signals:  CLK, CMD, DATA[0..3] */
-			davinci_cfg_reg(DM355_MMCSD0);
-
-			/* enable RX EDMA */
-			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
-		} else if (cpu_is_davinci_dm365()) {
-			mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
-			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
-							SZ_4K - 1;
-			mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM365_SDIOINT0);
-			davinci_mmcsd0_device.name = "da830-mmc";
-		} else if (cpu_is_davinci_dm644x()) {
-			/* REVISIT: should this be in board-init code? */
-			/* Power-on 3.3V IO cells */
-			__raw_writel(0,
-				DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-			/*Set up the pull regiter for MMC */
-			davinci_cfg_reg(DM644X_MSTK);
-		}
-
-		pdev = &davinci_mmcsd0_device;
-		break;
-	}
-
-	if (WARN_ON(!pdev))
-		return;
-
-	pdev->dev.platform_data = config;
-	platform_device_register(pdev);
-}
-
-#else
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-static struct resource wdt_resources[] = {
-	{
-		.start	= DAVINCI_WDOG_BASE,
-		.end	= DAVINCI_WDOG_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_wdt_device = {
-	.name		= "davinci-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-int davinci_init_wdt(void)
-{
-	return platform_device_register(&davinci_wdt_device);
-}
-
-static struct platform_device davinci_gpio_device = {
-	.name	= "davinci_gpio",
-	.id	= -1,
-};
-
-int davinci_gpio_register(struct resource *res, int size, void *pdata)
-{
-	davinci_gpio_device.resource = res;
-	davinci_gpio_device.num_resources = size;
-	davinci_gpio_device.dev.platform_data = pdata;
-	return platform_device_register(&davinci_gpio_device);
-}