Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 128 deletions

diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
deleted file mode 100644
index 569e72413561..000000000000
--- a/arch/arm/mach-ep93xx/simone.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/simone.c
- * Simplemachines Sim.One support.
- *
- * Copyright (C) 2010 Ryan Mallon
- *
- * Based on the 2.6.24.7 support:
- *   Copyright (C) 2009 Simplemachines
- *   MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-
-#include "hardware.h"
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata simone_eth_data = {
-	.phy_id		= 1,
-};
-
-static struct ep93xxfb_mach_info __initdata simone_fb_info = {
-	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
-};
-
-static struct mmc_spi_platform_data simone_mmc_spi_data = {
-	.detect_delay	= 500,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table simone_mmc_spi_gpio_table = {
-	.dev_id = "mmc_spi.0", /* "mmc_spi" @ CS0 */
-	.table = {
-		/* Card detect */
-		GPIO_LOOKUP_IDX("A", 0, NULL, 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct spi_board_info simone_spi_devices[] __initdata = {
-	{
-		.modalias		= "mmc_spi",
-		.platform_data		= &simone_mmc_spi_data,
-		/*
-		 * We use 10 MHz even though the maximum is 3.7 MHz. The driver
-		 * will limit it automatically to max. frequency.
-		 */
-		.max_speed_hz		= 10 * 1000 * 1000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_3,
-	},
-};
-
-/*
- * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
- * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
- * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
- */
-static struct gpiod_lookup_table simone_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info simone_spi_info __initdata = {
-	.use_dma = 1,
-};
-
-static struct i2c_board_info __initdata simone_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-	},
-};
-
-static struct platform_device simone_audio_device = {
-	.name		= "simone-audio",
-	.id		= -1,
-};
-
-static void __init simone_register_audio(void)
-{
-	ep93xx_register_ac97();
-	platform_device_register(&simone_audio_device);
-}
-
-static void __init simone_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
-	ep93xx_register_eth(&simone_eth_data, 1);
-	ep93xx_register_fb(&simone_fb_info);
-	ep93xx_register_i2c(simone_i2c_board_info,
-			    ARRAY_SIZE(simone_i2c_board_info));
-	gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
-	gpiod_add_lookup_table(&simone_spi_cs_gpio_table);
-	ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
-			    ARRAY_SIZE(simone_spi_devices));
-	simone_register_audio();
-}
-
-MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-	/* Maintainer: Ryan Mallon */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= simone_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END