Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

7 files changed, 0 insertions, 565 deletions

diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 2c40996a444b..703f3d232a60 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -25,13 +25,6 @@ config EP93XX_SOC_COMMON
 
 comment "EP93xx Platforms"
 
-config MACH_ADSSPHERE
-	bool "Support ADS Sphere"
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the ADS
-	  Sphere board.
-
 config MACH_BK3
 	bool "Support Liebherr BK3.1"
 	select MACH_TS72XX
@@ -98,62 +91,6 @@ config MACH_EDB9315A
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315A Evaluation Board.
 
-config MACH_GESBC9312
-	bool "Support Glomation GESBC-9312-sx"
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the Glomation
-	  GESBC-9312-sx board.
-
-config MACH_MICRO9
-	bool
-
-config MACH_MICRO9H
-	bool "Support Contec Micro9-High"
-	select MACH_MICRO9
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-High board.
-
-config MACH_MICRO9M
-	bool "Support Contec Micro9-Mid"
-	select MACH_MICRO9
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Mid board.
-
-config MACH_MICRO9L
-	bool "Support Contec Micro9-Lite"
-	select MACH_MICRO9
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Lite board.
-
-config MACH_MICRO9S
-	bool "Support Contec Micro9-Slim"
-	select MACH_MICRO9
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Slim board.
-
-config MACH_SIM_ONE
-        bool "Support Simplemachines Sim.One board"
-	depends on UNUSED_BOARD_FILES
-        help
-          Say 'Y' here if you want your kernel to support the
-          Simplemachines Sim.One board.
-
-config MACH_SNAPPER_CL15
-	bool "Support Bluewater Systems Snapper CL15 Module"
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the Bluewater
-	  Systems Snapper CL15 Module.
-
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
 	help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index cfad517fac46..62e37403df14 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -6,11 +6,6 @@ obj-y			:= core.o clock.o timer-ep93xx.o
 
 obj-$(CONFIG_EP93XX_DMA)	+= dma.o
 
-obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
 obj-$(CONFIG_MACH_EDB93XX)	+= edb93xx.o
-obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
-obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
-obj-$(CONFIG_MACH_SIM_ONE)	+= simone.o
-obj-$(CONFIG_MACH_SNAPPER_CL15)	+= snappercl15.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
 obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
deleted file mode 100644
index 0c48d3c5b8e7..000000000000
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/adssphere.c
- * ADS Sphere support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sizes.h>
-
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata adssphere_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init adssphere_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
-	ep93xx_register_eth(&adssphere_eth_data, 1);
-}
-
-MACHINE_START(ADSSPHERE, "ADS Sphere board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= adssphere_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
deleted file mode 100644
index 0b7043e3e178..000000000000
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/gesbc9312.c
- * Glomation GESBC-9312-sx support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sizes.h>
-
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init gesbc9312_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M);
-	ep93xx_register_eth(&gesbc9312_eth_data, 0);
-}
-
-MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= gesbc9312_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
deleted file mode 100644
index c121c459aa17..000000000000
--- a/arch/arm/mach-ep93xx/micro9.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-ep93xx/micro9.c
- *
- * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- *                    Manfred Gruber <m.gruber@tirol.com>
- * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
- *                    Hubert Feurstein <hubert.feurstein@contec.at>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-/*************************************************************************
- * Micro9 NOR Flash
- *
- * Micro9-High has up to 64MB of 32-bit flash on CS1
- * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a separate MTD map driver for flash support
- * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
- *************************************************************************/
-static unsigned int __init micro9_detect_bootwidth(void)
-{
-	u32 v;
-
-	/* Detect the bus width of the external flash memory */
-	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
-	if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
-		return 4; /* 32-bit */
-	else
-		return 2; /* 16-bit */
-}
-
-static void __init micro9_register_flash(void)
-{
-	unsigned int width;
-
-	if (machine_is_micro9())
-		width = 4;
-	else if (machine_is_micro9m() || machine_is_micro9s())
-		width = micro9_detect_bootwidth();
-	else
-		width = 0;
-
-	if (width)
-		ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M);
-}
-
-
-/*************************************************************************
- * Micro9 Ethernet
- *************************************************************************/
-static struct ep93xx_eth_data __initdata micro9_eth_data = {
-	.phy_id		= 0x1f,
-};
-
-
-static void __init micro9_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_eth(&micro9_eth_data, 1);
-	micro9_register_flash();
-}
-
-
-#ifdef CONFIG_MACH_MICRO9H
-MACHINE_START(MICRO9, "Contec Micro9-High")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9M
-MACHINE_START(MICRO9M, "Contec Micro9-Mid")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9L
-MACHINE_START(MICRO9L, "Contec Micro9-Lite")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9S
-MACHINE_START(MICRO9S, "Contec Micro9-Slim")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
deleted file mode 100644
index 569e72413561..000000000000
--- a/arch/arm/mach-ep93xx/simone.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/simone.c
- * Simplemachines Sim.One support.
- *
- * Copyright (C) 2010 Ryan Mallon
- *
- * Based on the 2.6.24.7 support:
- *   Copyright (C) 2009 Simplemachines
- *   MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-
-#include "hardware.h"
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata simone_eth_data = {
-	.phy_id		= 1,
-};
-
-static struct ep93xxfb_mach_info __initdata simone_fb_info = {
-	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
-};
-
-static struct mmc_spi_platform_data simone_mmc_spi_data = {
-	.detect_delay	= 500,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table simone_mmc_spi_gpio_table = {
-	.dev_id = "mmc_spi.0", /* "mmc_spi" @ CS0 */
-	.table = {
-		/* Card detect */
-		GPIO_LOOKUP_IDX("A", 0, NULL, 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct spi_board_info simone_spi_devices[] __initdata = {
-	{
-		.modalias		= "mmc_spi",
-		.platform_data		= &simone_mmc_spi_data,
-		/*
-		 * We use 10 MHz even though the maximum is 3.7 MHz. The driver
-		 * will limit it automatically to max. frequency.
-		 */
-		.max_speed_hz		= 10 * 1000 * 1000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_3,
-	},
-};
-
-/*
- * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
- * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
- * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
- */
-static struct gpiod_lookup_table simone_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info simone_spi_info __initdata = {
-	.use_dma = 1,
-};
-
-static struct i2c_board_info __initdata simone_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-	},
-};
-
-static struct platform_device simone_audio_device = {
-	.name		= "simone-audio",
-	.id		= -1,
-};
-
-static void __init simone_register_audio(void)
-{
-	ep93xx_register_ac97();
-	platform_device_register(&simone_audio_device);
-}
-
-static void __init simone_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
-	ep93xx_register_eth(&simone_eth_data, 1);
-	ep93xx_register_fb(&simone_fb_info);
-	ep93xx_register_i2c(simone_i2c_board_info,
-			    ARRAY_SIZE(simone_i2c_board_info));
-	gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
-	gpiod_add_lookup_table(&simone_spi_cs_gpio_table);
-	ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
-			    ARRAY_SIZE(simone_spi_devices));
-	simone_register_audio();
-}
-
-MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-	/* Maintainer: Ryan Mallon */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= simone_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
deleted file mode 100644
index 1dfb725671b1..000000000000
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/snappercl15.c
- * Bluewater Systems Snapper CL15 system module
- *
- * Copyright (C) 2009 Bluewater Systems Ltd
- * Author: Ryan Mallon
- *
- * NAND code adapted from driver by:
- *   Andre Renaud <andre@bluewatersys.com>
- *   James R. McKaskill
- */
-
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-
-#include <linux/mtd/platnand.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-#define SNAPPERCL15_NAND_BASE	(EP93XX_CS7_PHYS_BASE + SZ_16M)
-
-#define SNAPPERCL15_NAND_WPN	(1 << 8)  /* Write protect (active low) */
-#define SNAPPERCL15_NAND_ALE	(1 << 9)  /* Address latch */
-#define SNAPPERCL15_NAND_CLE	(1 << 10) /* Command latch */
-#define SNAPPERCL15_NAND_CEN	(1 << 11) /* Chip enable (active low) */
-#define SNAPPERCL15_NAND_RDY	(1 << 14) /* Device ready */
-
-#define NAND_CTRL_ADDR(chip) 	(chip->legacy.IO_ADDR_W + 0x40)
-
-static void snappercl15_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
-				      unsigned int ctrl)
-{
-	static u16 nand_state = SNAPPERCL15_NAND_WPN;
-	u16 set;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
-
-		if (ctrl & NAND_NCE)
-			set &= ~SNAPPERCL15_NAND_CEN;
-		if (ctrl & NAND_CLE)
-			set |= SNAPPERCL15_NAND_CLE;
-		if (ctrl & NAND_ALE)
-			set |= SNAPPERCL15_NAND_ALE;
-
-		nand_state &= ~(SNAPPERCL15_NAND_CEN |
-				SNAPPERCL15_NAND_CLE |
-				SNAPPERCL15_NAND_ALE);
-		nand_state |= set;
-		__raw_writew(nand_state, NAND_CTRL_ADDR(chip));
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		__raw_writew((cmd & 0xff) | nand_state,
-			     chip->legacy.IO_ADDR_W);
-}
-
-static int snappercl15_nand_dev_ready(struct nand_chip *chip)
-{
-	return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
-}
-
-static struct mtd_partition snappercl15_nand_parts[] = {
-	{
-		.name		= "Kernel",
-		.offset		= 0,
-		.size		= SZ_2M,
-	},
-	{
-		.name		= "Filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct platform_nand_data snappercl15_nand_data = {
-	.chip = {
-		.nr_chips		= 1,
-		.partitions		= snappercl15_nand_parts,
-		.nr_partitions		= ARRAY_SIZE(snappercl15_nand_parts),
-		.chip_delay		= 25,
-	},
-	.ctrl = {
-		.dev_ready		= snappercl15_nand_dev_ready,
-		.cmd_ctrl		= snappercl15_nand_cmd_ctrl,
-	},
-};
-
-static struct resource snappercl15_nand_resource[] = {
-	{
-		.start		= SNAPPERCL15_NAND_BASE,
-		.end		= SNAPPERCL15_NAND_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device snappercl15_nand_device = {
-	.name			= "gen_nand",
-	.id			= -1,
-	.dev.platform_data	= &snappercl15_nand_data,
-	.resource		= snappercl15_nand_resource,
-	.num_resources		= ARRAY_SIZE(snappercl15_nand_resource),
-};
-
-static struct ep93xx_eth_data __initdata snappercl15_eth_data = {
-	.phy_id			= 1,
-};
-
-static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
-	{
-		/* Audio codec */
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
-};
-
-static struct platform_device snappercl15_audio_device = {
-	.name		= "snappercl15-audio",
-	.id		= -1,
-};
-
-static void __init snappercl15_register_audio(void)
-{
-	ep93xx_register_i2s();
-	platform_device_register(&snappercl15_audio_device);
-}
-
-static void __init snappercl15_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_eth(&snappercl15_eth_data, 1);
-	ep93xx_register_i2c(snappercl15_i2c_data,
-			    ARRAY_SIZE(snappercl15_i2c_data));
-	ep93xx_register_fb(&snappercl15_fb_info);
-	snappercl15_register_audio();
-	platform_device_register(&snappercl15_nand_device);
-}
-
-MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
-	/* Maintainer: Ryan Mallon */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= snappercl15_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END