summaryrefslogtreecommitdiff
path: root/arch/arm/mach-ixp4xx
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2017-09-26 21:27:09 +0300
committerLinus Walleij <linus.walleij@linaro.org>2017-12-08 17:32:53 +0300
commite0fc62a6552f3d9c21e73cc65844f9aad1892cf7 (patch)
tree2310cbf810a4576bf8e00881d051fe9ab02a733c /arch/arm/mach-ixp4xx
parent110e2a38c8daabb6f33e164dab6083afeeb2dd5e (diff)
downloadlinux-e0fc62a6552f3d9c21e73cc65844f9aad1892cf7.tar.xz
w1: w1-gpio: Convert to use GPIO descriptors
The w1 master driver includes a complete open drain emulation reimplementation among other things. This converts the driver and all board files using it to use GPIO descriptors associated with the device to look up the GPIO wire, as well ass the optional pull-up GPIO line. When probed from the device tree, the driver will just pick descriptors and use them right off. For the two board files in the kernel, we add descriptor lookups so we do not need to keep any old platform data handling around for the GPIO lines. As the platform data is also a state container for this driver, we augment it to contain the GPIO descriptors. w1_gpio_write_bit_dir() and w1_gpio_write_bit_val() are gone since this pair was a reimplementation of open drain emulation which is now handled by gpiolib. The special "linux,open-drain" flag is a bit of mishap here: it has the same semantic as the same flags in I2C: it means that something in the platform is setting up the line as open drain behind our back. We handle this the same way as in I2C. To drive the pull-up, we need to bypass open drain emulation in gpiolib for the line, and this is done by driving it high using gpiod_set_raw_value() which has been augmented to have the semantic of overriding the open drain emulation. We also augment the documentation to reflect the way to pass GPIO descriptors from the machine. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/mach-ixp4xx')
-rw-r--r--arch/arm/mach-ixp4xx/vulcan-setup.c13
1 files changed, 11 insertions, 2 deletions
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 731fb2019ecb..2c03d2f6b647 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -16,6 +16,7 @@
#include <linux/serial_8250.h>
#include <linux/io.h>
#include <linux/w1-gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/mtd/plat-ram.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -162,9 +163,16 @@ static struct platform_device vulcan_max6369 = {
.num_resources = 1,
};
+static struct gpiod_lookup_table vulcan_w1_gpiod_table = {
+ .dev_id = "w1-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", 14, NULL, 0,
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ },
+};
+
static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
- .pin = 14,
- .ext_pullup_enable_pin = -EINVAL,
+ /* Intentionally left blank */
};
static struct platform_device vulcan_w1_gpio = {
@@ -233,6 +241,7 @@ static void __init vulcan_init(void)
IXP4XX_EXP_BUS_WR_EN |
IXP4XX_EXP_BUS_BYTE_EN;
+ gpiod_add_lookup_table(&vulcan_w1_gpiod_table);
platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices));
}