summaryrefslogtreecommitdiff
path: root/arch/arm/mach-lpc32xx
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-03-21 00:37:22 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2016-03-21 00:37:22 +0300
commite88fa1b8b00a947299e2415e819301fa52037cf4 (patch)
treec16dc012450345b52e2a8fa2562f3470e2b3c546 /arch/arm/mach-lpc32xx
parentdae0b74eb7abd7d5c7572414b0c8f91c2dab63c0 (diff)
parent809683ee060de5ea45294d465dc242dee1ff189f (diff)
downloadlinux-e88fa1b8b00a947299e2415e819301fa52037cf4.tar.xz
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann: "A few simple cleanups across multiple platforms, not much standing out: - lpc32xx removes its private implementation of the clk API, after generic code was merged in 4.5 - all unused Makefile.boot files get removed - a number of simplifications for shmobile - asm/clkdev.h gets replaced with the asm-generic version after all mach/clkdev.h implementations are gone" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: shmobile: Kconfig: Get rid of old comment ARM: shmobile: Consolidate SCU mapping code arm: lpc32xx: remove direct control of GPIOs from shared mach file arm: lpc32xx: remove selected HAVE_IDE arm: lpc32xx: switch to common clock framework ARM: Use generic clkdev.h header ARM: plat-versatile: Remove unused clock.c file ARM: netx: remove redundant "depends on ARCH_NETX" ARM: integrator: remove redundant select in Kconfig ARM: drop unused Makefile.boot of Multiplatform SoCs ARM: mvebu: add missing of_node_put() ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code ARM: shmobile: Typo s/MIPDR/MPIDR/ ARM: shmobile: Add includes providing forward declarations ARM: shmobile: rcar-gen2: Make rcar_gen2_dma_contiguous static ARM: mv78xx0: use "depends on" instead of "if" after prompt
Diffstat (limited to 'arch/arm/mach-lpc32xx')
-rw-r--r--arch/arm/mach-lpc32xx/Makefile3
-rw-r--r--arch/arm/mach-lpc32xx/clock.c1284
-rw-r--r--arch/arm/mach-lpc32xx/phy3250.c53
-rw-r--r--arch/arm/mach-lpc32xx/serial.c3
-rw-r--r--arch/arm/mach-lpc32xx/timer.c144
5 files changed, 1 insertions, 1486 deletions
diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile
index f5db805ab958..c70709ada692 100644
--- a/arch/arm/mach-lpc32xx/Makefile
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -2,7 +2,6 @@
# Makefile for the linux kernel.
#
-obj-y := timer.o irq.o common.o serial.o clock.o
+obj-y := irq.o common.o serial.o
obj-y += pm.o suspend.o
obj-y += phy3250.o
-
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
deleted file mode 100644
index 661c8f4b2310..000000000000
--- a/arch/arm/mach-lpc32xx/clock.c
+++ /dev/null
@@ -1,1284 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/clock.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
- * LPC32xx clock management driver overview
- *
- * The LPC32XX contains a number of high level system clocks that can be
- * generated from different sources. These system clocks are used to
- * generate the CPU and bus rates and the individual peripheral clocks in
- * the system. When Linux is started by the boot loader, the system
- * clocks are already running. Stopping a system clock during normal
- * Linux operation should never be attempted, as peripherals that require
- * those clocks will quit working (ie, DRAM).
- *
- * The LPC32xx high level clock tree looks as follows. Clocks marked with
- * an asterisk are always on and cannot be disabled. Clocks marked with
- * an ampersand can only be disabled in CPU suspend mode. Clocks marked
- * with a caret are always on if it is the selected clock for the SYSCLK
- * source. The clock that isn't used for SYSCLK can be enabled and
- * disabled normally.
- * 32KHz oscillator*
- * / | \
- * RTC* PLL397^ TOUCH
- * /
- * Main oscillator^ /
- * | \ /
- * | SYSCLK&
- * | \
- * | \
- * USB_PLL HCLK_PLL&
- * | | |
- * USB host/device PCLK& |
- * | |
- * Peripherals
- *
- * The CPU and chip bus rates are derived from the HCLK PLL, which can
- * generate various clock rates up to 266MHz and beyond. The internal bus
- * rates (PCLK and HCLK) are generated from dividers based on the HCLK
- * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate,
- * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high
- * level clocks are based on either HCLK or PCLK, but have their own
- * dividers as part of the IP itself. Because of this, the system clock
- * rates should not be changed.
- *
- * The HCLK PLL is clocked from SYSCLK, which can be derived from the
- * main oscillator or PLL397. PLL397 generates a rate that is 397 times
- * the 32KHz oscillator rate. The main oscillator runs at the selected
- * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate
- * is normally 13MHz, but depends on the selection of external crystals
- * or oscillators. If USB operation is required, the main oscillator must
- * be used in the system.
- *
- * Switching SYSCLK between sources during normal Linux operation is not
- * supported. SYSCLK is preset in the bootloader. Because of the
- * complexities of clock management during clock frequency changes,
- * there are some limitations to the clock driver explained below:
- * - The PLL397 and main oscillator can be enabled and disabled by the
- * clk_enable() and clk_disable() functions unless SYSCLK is based
- * on that clock. This allows the other oscillator that isn't driving
- * the HCLK PLL to be used as another system clock that can be routed
- * to an external pin.
- * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with
- * this driver.
- * - HCLK and PCLK rates cannot be changed as part of this driver.
- * - Most peripherals have their own dividers are part of the peripheral
- * block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates
- * will also impact the individual peripheral rates.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "clock.h"
-#include "common.h"
-
-static DEFINE_SPINLOCK(global_clkregs_lock);
-
-static int usb_pll_enable, usb_pll_valid;
-
-static struct clk clk_armpll;
-static struct clk clk_usbpll;
-
-/*
- * Post divider values for PLLs based on selected register value
- */
-static const u32 pll_postdivs[4] = {1, 2, 4, 8};
-
-static unsigned long local_return_parent_rate(struct clk *clk)
-{
- /*
- * If a clock has a rate of 0, then it inherits it's parent
- * clock rate
- */
- while (clk->rate == 0)
- clk = clk->parent;
-
- return clk->rate;
-}
-
-/* 32KHz clock has a fixed rate and is not stoppable */
-static struct clk osc_32KHz = {
- .rate = LPC32XX_CLOCK_OSC_FREQ,
- .get_rate = local_return_parent_rate,
-};
-
-static int local_pll397_enable(struct clk *clk, int enable)
-{
- u32 reg;
- unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
- reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
-
- if (enable == 0) {
- reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
- __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
- } else {
- /* Enable PLL397 */
- reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
- __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
-
- /* Wait for PLL397 lock */
- while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
- LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
- time_before(jiffies, timeout))
- cpu_relax();
-
- if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
- LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0)
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int local_oscmain_enable(struct clk *clk, int enable)
-{
- u32 reg;
- unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
- reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-
- if (enable == 0) {
- reg |= LPC32XX_CLKPWR_MOSC_DISABLE;
- __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
- } else {
- /* Enable main oscillator */
- reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE;
- __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-
- /* Wait for main oscillator to start */
- while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
- LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
- time_before(jiffies, timeout))
- cpu_relax();
-
- if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
- LPC32XX_CLKPWR_MOSC_DISABLE) != 0)
- return -ENODEV;
- }
-
- return 0;
-}
-
-static struct clk osc_pll397 = {
- .parent = &osc_32KHz,
- .enable = local_pll397_enable,
- .rate = LPC32XX_CLOCK_OSC_FREQ * 397,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk osc_main = {
- .enable = local_oscmain_enable,
- .rate = LPC32XX_MAIN_OSC_FREQ,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_sys;
-
-/*
- * Convert a PLL register value to a PLL output frequency
- */
-u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval)
-{
- struct clk_pll_setup pllcfg;
-
- pllcfg.cco_bypass_b15 = 0;
- pllcfg.direct_output_b14 = 0;
- pllcfg.fdbk_div_ctrl_b13 = 0;
- if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0)
- pllcfg.cco_bypass_b15 = 1;
- if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0)
- pllcfg.direct_output_b14 = 1;
- if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0)
- pllcfg.fdbk_div_ctrl_b13 = 1;
- pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF);
- pllcfg.pll_n = 1 + ((regval >> 9) & 0x3);
- pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)];
-
- return clk_check_pll_setup(inputclk, &pllcfg);
-}
-
-/*
- * Setup the HCLK PLL with a PLL structure
- */
-static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup)
-{
- u32 tv, tmp = 0;
-
- if (PllSetup->analog_on != 0)
- tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP;
- if (PllSetup->cco_bypass_b15 != 0)
- tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS;
- if (PllSetup->direct_output_b14 != 0)
- tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS;
- if (PllSetup->fdbk_div_ctrl_b13 != 0)
- tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK;
-
- tv = ffs(PllSetup->pll_p) - 1;
- if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3))
- return 0;
-
- tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv);
- tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1);
- tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1);
-
- return tmp;
-}
-
-/*
- * Update the ARM core PLL frequency rate variable from the actual PLL setting
- */
-static void local_update_armpll_rate(void)
-{
- u32 clkin, pllreg;
-
- clkin = clk_armpll.parent->rate;
- pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
-
- clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg);
-}
-
-/*
- * Find a PLL configuration for the selected input frequency
- */
-static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq,
- struct clk_pll_setup *pllsetup)
-{
- u32 ifreq, freqtol, m, n, p, fclkout;
-
- /* Determine frequency tolerance limits */
- freqtol = target_freq / 250;
- ifreq = pllin_freq;
-
- /* Is direct bypass mode possible? */
- if (abs(pllin_freq - target_freq) <= freqtol) {
- pllsetup->analog_on = 0;
- pllsetup->cco_bypass_b15 = 1;
- pllsetup->direct_output_b14 = 1;
- pllsetup->fdbk_div_ctrl_b13 = 1;
- pllsetup->pll_p = pll_postdivs[0];
- pllsetup->pll_n = 1;
- pllsetup->pll_m = 1;
- return clk_check_pll_setup(ifreq, pllsetup);
- } else if (target_freq <= ifreq) {
- pllsetup->analog_on = 0;
- pllsetup->cco_bypass_b15 = 1;
- pllsetup->direct_output_b14 = 0;
- pllsetup->fdbk_div_ctrl_b13 = 1;
- pllsetup->pll_n = 1;
- pllsetup->pll_m = 1;
- for (p = 0; p <= 3; p++) {
- pllsetup->pll_p = pll_postdivs[p];
- fclkout = clk_check_pll_setup(ifreq, pllsetup);
- if (abs(target_freq - fclkout) <= freqtol)
- return fclkout;
- }
- }
-
- /* Is direct mode possible? */
- pllsetup->analog_on = 1;
- pllsetup->cco_bypass_b15 = 0;
- pllsetup->direct_output_b14 = 1;
- pllsetup->fdbk_div_ctrl_b13 = 0;
- pllsetup->pll_p = pll_postdivs[0];
- for (m = 1; m <= 256; m++) {
- for (n = 1; n <= 4; n++) {
- /* Compute output frequency for this value */
- pllsetup->pll_n = n;
- pllsetup->pll_m = m;
- fclkout = clk_check_pll_setup(ifreq,
- pllsetup);
- if (abs(target_freq - fclkout) <=
- freqtol)
- return fclkout;
- }
- }
-
- /* Is integer mode possible? */
- pllsetup->analog_on = 1;
- pllsetup->cco_bypass_b15 = 0;
- pllsetup->direct_output_b14 = 0;
- pllsetup->fdbk_div_ctrl_b13 = 1;
- for (m = 1; m <= 256; m++) {
- for (n = 1; n <= 4; n++) {
- for (p = 0; p < 4; p++) {
- /* Compute output frequency */
- pllsetup->pll_p = pll_postdivs[p];
- pllsetup->pll_n = n;
- pllsetup->pll_m = m;
- fclkout = clk_check_pll_setup(
- ifreq, pllsetup);
- if (abs(target_freq - fclkout) <= freqtol)
- return fclkout;
- }
- }
- }
-
- /* Try non-integer mode */
- pllsetup->analog_on = 1;
- pllsetup->cco_bypass_b15 = 0;
- pllsetup->direct_output_b14 = 0;
- pllsetup->fdbk_div_ctrl_b13 = 0;
- for (m = 1; m <= 256; m++) {
- for (n = 1; n <= 4; n++) {
- for (p = 0; p < 4; p++) {
- /* Compute output frequency */
- pllsetup->pll_p = pll_postdivs[p];
- pllsetup->pll_n = n;
- pllsetup->pll_m = m;
- fclkout = clk_check_pll_setup(
- ifreq, pllsetup);
- if (abs(target_freq - fclkout) <= freqtol)
- return fclkout;
- }
- }
- }
-
- return 0;
-}
-
-static struct clk clk_armpll = {
- .parent = &clk_sys,
- .get_rate = local_return_parent_rate,
-};
-
-/*
- * Setup the USB PLL with a PLL structure
- */
-static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
-{
- u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup);
-
- reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF;
- reg |= tmp;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
- return clk_check_pll_setup(clk_usbpll.parent->rate,
- pHCLKPllSetup);
-}
-
-static int local_usbpll_enable(struct clk *clk, int enable)
-{
- u32 reg;
- int ret = 0;
- unsigned long timeout = jiffies + msecs_to_jiffies(20);
-
- reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-
- __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 |
- LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
- LPC32XX_CLKPWR_USB_CTRL);
- __raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1,
- LPC32XX_CLKPWR_USB_CTRL);
-
- if (enable && usb_pll_valid && usb_pll_enable) {
- ret = -ENODEV;
- /*
- * If the PLL rate has been previously set, then the rate
- * in the PLL register is valid and can be enabled here.
- * Otherwise, it needs to be enabled as part of setrate.
- */
-
- /*
- * Gate clock into PLL
- */
- reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
- /*
- * Enable PLL
- */
- reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP;
- __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
- /*
- * Wait for PLL to lock
- */
- while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
- reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
- if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
- ret = 0;
- else
- udelay(10);
- }
-
- /*
- * Gate clock from PLL if PLL is locked
- */
- if (ret == 0) {
- __raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2,
- LPC32XX_CLKPWR_USB_CTRL);
- } else {
- __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
- LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
- LPC32XX_CLKPWR_USB_CTRL);
- }
- } else if ((enable == 0) && usb_pll_valid && usb_pll_enable) {
- usb_pll_valid = 0;
- usb_pll_enable = 0;
- }
-
- return ret;
-}
-
-static unsigned long local_usbpll_round_rate(struct clk *clk,
- unsigned long rate)
-{
- u32 clkin, usbdiv;
- struct clk_pll_setup pllsetup;
-
- /*
- * Unlike other clocks, this clock has a KHz input rate, so bump
- * it up to work with the PLL function
- */
- rate = rate * 1000;
-
- clkin = clk->get_rate(clk);
- usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
- LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
- clkin = clkin / usbdiv;
-
- /* Try to find a good rate setup */
- if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
- return 0;
-
- return clk_check_pll_setup(clkin, &pllsetup);
-}
-
-static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -ENODEV;
- u32 clkin, usbdiv;
- struct clk_pll_setup pllsetup;
-
- /*
- * Unlike other clocks, this clock has a KHz input rate, so bump
- * it up to work with the PLL function
- */
- rate = rate * 1000;
-
- clkin = clk->get_rate(clk->parent);
- usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
- LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
- clkin = clkin / usbdiv;
-
- /* Try to find a good rate setup */
- if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
- return -EINVAL;
-
- /*
- * Disable PLL clocks during PLL change
- */
- local_usbpll_enable(clk, 0);
- pllsetup.analog_on = 0;
- local_clk_usbpll_setup(&pllsetup);
-
- /*
- * Start USB PLL and check PLL status
- */
-
- usb_pll_valid = 1;
- usb_pll_enable = 1;
-
- ret = local_usbpll_enable(clk, 1);
- if (ret >= 0)
- clk->rate = clk_check_pll_setup(clkin, &pllsetup);
-
- return ret;
-}
-
-static struct clk clk_usbpll = {
- .parent = &osc_main,
- .set_rate = local_usbpll_set_rate,
- .enable = local_usbpll_enable,
- .rate = 48000, /* In KHz */
- .get_rate = local_return_parent_rate,
- .round_rate = local_usbpll_round_rate,
-};
-
-static u32 clk_get_hclk_div(void)
-{
- static const u32 hclkdivs[4] = {1, 2, 4, 4};
- return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(
- __raw_readl(LPC32XX_CLKPWR_HCLK_DIV))];
-}
-
-static struct clk clk_hclk = {
- .parent = &clk_armpll,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_pclk = {
- .parent = &clk_armpll,
- .get_rate = local_return_parent_rate,
-};
-
-static int local_onoff_enable(struct clk *clk, int enable)
-{
- u32 tmp;
-
- tmp = __raw_readl(clk->enable_reg);
-
- if (enable == 0)
- tmp &= ~clk->enable_mask;
- else
- tmp |= clk->enable_mask;
-
- __raw_writel(tmp, clk->enable_reg);
-
- return 0;
-}
-
-/* Peripheral clock sources */
-static struct clk clk_timer0 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
- .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_timer1 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
- .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_timer2 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
- .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_timer3 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
- .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_mpwm = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
- .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_wdt = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_TIMER_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_vfp9 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_DEBUG_CTRL,
- .enable_mask = LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT,
- .get_rate = local_return_parent_rate,
-};
-static struct clk clk_dma = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_DMA_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_pwm = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_PWM_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN |
- LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK |
- LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(1) |
- LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN |
- LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK |
- LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(1),
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_uart3 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_uart4 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_uart5 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_uart6 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_i2c0 = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_i2c1 = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_i2c2 = {
- .parent = &clk_pclk,
- .enable = local_onoff_enable,
- .enable_reg = io_p2v(LPC32XX_USB_BASE + 0xFF4),
- .enable_mask = 0x4,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_ssp0 = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_ssp1 = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_kscan = {
- .parent = &osc_32KHz,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_KEY_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_nand = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN |
- LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_nand_mlc = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN |
- LPC32XX_CLKPWR_NANDCLK_DMA_INT |
- LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_i2s0 = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_i2s1 = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN |
- LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_net = {
- .parent = &clk_hclk,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_MACCLK_CTRL,
- .enable_mask = (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN |
- LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN |
- LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN),
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_rtc = {
- .parent = &osc_32KHz,
- .rate = 1, /* 1 Hz */
- .get_rate = local_return_parent_rate,
-};
-
-static int local_usb_enable(struct clk *clk, int enable)
-{
- u32 tmp;
-
- if (enable) {
- /* Set up I2C pull levels */
- tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
- tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE;
- __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
- }
-
- return local_onoff_enable(clk, enable);
-}
-
-static struct clk clk_usbd = {
- .parent = &clk_usbpll,
- .enable = local_usb_enable,
- .enable_reg = LPC32XX_CLKPWR_USB_CTRL,
- .enable_mask = LPC32XX_CLKPWR_USBCTRL_HCLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-#define OTG_ALWAYS_MASK (LPC32XX_USB_OTG_OTG_CLOCK_ON | \
- LPC32XX_USB_OTG_I2C_CLOCK_ON)
-
-static int local_usb_otg_enable(struct clk *clk, int enable)
-{
- int to = 1000;
-
- if (enable) {
- __raw_writel(clk->enable_mask, clk->enable_reg);
-
- while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) &
- clk->enable_mask) != clk->enable_mask) && (to > 0))
- to--;
- } else {
- __raw_writel(OTG_ALWAYS_MASK, clk->enable_reg);
-
- while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) &
- OTG_ALWAYS_MASK) != OTG_ALWAYS_MASK) && (to > 0))
- to--;
- }
-
- if (to)
- return 0;
- else
- return -1;
-}
-
-static struct clk clk_usb_otg_dev = {
- .parent = &clk_usbpll,
- .enable = local_usb_otg_enable,
- .enable_reg = LPC32XX_USB_OTG_CLK_CTRL,
- .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON |
- LPC32XX_USB_OTG_OTG_CLOCK_ON |
- LPC32XX_USB_OTG_DEV_CLOCK_ON |
- LPC32XX_USB_OTG_I2C_CLOCK_ON,
- .get_rate = local_return_parent_rate,
-};
-
-static struct clk clk_usb_otg_host = {
- .parent = &clk_usbpll,
- .enable = local_usb_otg_enable,
- .enable_reg = LPC32XX_USB_OTG_CLK_CTRL,
- .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON |
- LPC32XX_USB_OTG_OTG_CLOCK_ON |
- LPC32XX_USB_OTG_HOST_CLOCK_ON |
- LPC32XX_USB_OTG_I2C_CLOCK_ON,
- .get_rate = local_return_parent_rate,
-};
-
-static int tsc_onoff_enable(struct clk *clk, int enable)
-{
- u32 tmp;
-
- /* Make sure 32KHz clock is the selected clock */
- tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
- tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
- __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-
- if (enable == 0)
- __raw_writel(0, clk->enable_reg);
- else
- __raw_writel(clk->enable_mask, clk->enable_reg);
-
- return 0;
-}
-
-static struct clk clk_tsc = {
- .parent = &osc_32KHz,
- .enable = tsc_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static int adc_onoff_enable(struct clk *clk, int enable)
-{
- u32 tmp;
- u32 divider;
-
- /* Use PERIPH_CLOCK */
- tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
- tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
- /*
- * Set clock divider so that we have equal to or less than
- * 4.5MHz clock at ADC
- */
- divider = clk->get_rate(clk) / 4500000 + 1;
- tmp |= divider;
- __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-
- /* synchronize rate of this clock w/ actual HW setting */
- clk->rate = clk->get_rate(clk->parent) / divider;
-
- if (enable == 0)
- __raw_writel(0, clk->enable_reg);
- else
- __raw_writel(clk->enable_mask, clk->enable_reg);
-
- return 0;
-}
-
-static struct clk clk_adc = {
- .parent = &clk_pclk,
- .enable = adc_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
- .get_rate = local_return_parent_rate,
-};
-
-static int mmc_onoff_enable(struct clk *clk, int enable)
-{
- u32 tmp;
-
- tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
- ~(LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
- LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN |
- LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS |
- LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS |
- LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS |
- LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS);
-
- /* If rate is 0, disable clock */
- if (enable != 0)
- tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
- LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN;
-
- __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
-
- return 0;
-}
-
-static unsigned long mmc_get_rate(struct clk *clk)
-{
- u32 div, rate, oldclk;
-
- /* The MMC clock must be on when accessing an MMC register */
- oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
- __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
- LPC32XX_CLKPWR_MS_CTRL);
- div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
- __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
-
- /* Get the parent clock rate */
- rate = clk->parent->get_rate(clk->parent);
-
- /* Get the MMC controller clock divider value */
- div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
-
- if (!div)
- div = 1;
-
- return rate / div;
-}
-
-static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long div, prate;
-
- /* Get the parent clock rate */
- prate = clk->parent->get_rate(clk->parent);
-
- if (rate >= prate)
- return prate;
-
- div = prate / rate;
- if (div > 0xf)
- div = 0xf;
-
- return prate / div;
-}
-
-static int mmc_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 tmp;
- unsigned long prate, div, crate = mmc_round_rate(clk, rate);
-
- prate = clk->parent->get_rate(clk->parent);
-
- div = prate / crate;
-
- /* The MMC clock must be on when accessing an MMC register */
- tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
- ~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
- tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div) |
- LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
- __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
-
- return 0;
-}
-
-static struct clk clk_mmc = {
- .parent = &clk_armpll,
- .set_rate = mmc_set_rate,
- .get_rate = mmc_get_rate,
- .round_rate = mmc_round_rate,
- .enable = mmc_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_MS_CTRL,
- .enable_mask = LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-};
-
-static unsigned long clcd_get_rate(struct clk *clk)
-{
- u32 tmp, div, rate, oldclk;
-
- /* The LCD clock must be on when accessing an LCD register */
- oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
- __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
- LPC32XX_CLKPWR_LCDCLK_CTRL);
- tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
- __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
- rate = clk->parent->get_rate(clk->parent);
-
- /* Only supports internal clocking */
- if (tmp & TIM2_BCD)
- return rate;
-
- div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22);
- tmp = rate / (2 + div);
-
- return tmp;
-}
-
-static int clcd_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 tmp, prate, div, oldclk;
-
- /* The LCD clock must be on when accessing an LCD register */
- oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
- __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
- LPC32XX_CLKPWR_LCDCLK_CTRL);
-
- tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD;
- prate = clk->parent->get_rate(clk->parent);
-
- if (rate < prate) {
- /* Find closest divider */
- div = prate / rate;
- if (div >= 2) {
- div -= 2;
- tmp &= ~TIM2_BCD;
- }
-
- tmp &= ~(0xF800001F);
- tmp |= (div & 0x1F);
- tmp |= (((div >> 5) & 0x1F) << 27);
- }
-
- __raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
- __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
- return 0;
-}
-
-static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 prate, div;
-
- prate = clk->parent->get_rate(clk->parent);
-
- if (rate >= prate)
- rate = prate;
- else {
- div = prate / rate;
- if (div > 0x3ff)
- div = 0x3ff;
-
- rate = prate / div;
- }
-
- return rate;
-}
-
-static struct clk clk_lcd = {
- .parent = &clk_hclk,
- .set_rate = clcd_set_rate,
- .get_rate = clcd_get_rate,
- .round_rate = clcd_round_rate,
- .enable = local_onoff_enable,
- .enable_reg = LPC32XX_CLKPWR_LCDCLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-};
-
-static void local_clk_disable(struct clk *clk)
-{
- /* Don't attempt to disable clock if it has no users */
- if (clk->usecount > 0) {
- clk->usecount--;
-
- /* Only disable clock when it has no more users */
- if ((clk->usecount == 0) && (clk->enable))
- clk->enable(clk, 0);
-
- /* Check parent clocks, they may need to be disabled too */
- if (clk->parent)
- local_clk_disable(clk->parent);
- }
-}
-
-static int local_clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- /* Enable parent clocks first and update use counts */
- if (clk->parent)
- ret = local_clk_enable(clk->parent);
-
- if (!ret) {
- /* Only enable clock if it's currently disabled */
- if ((clk->usecount == 0) && (clk->enable))
- ret = clk->enable(clk, 1);
-
- if (!ret)
- clk->usecount++;
- else if (clk->parent)
- local_clk_disable(clk->parent);
- }
-
- return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- */
-int clk_enable(struct clk *clk)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&global_clkregs_lock, flags);
- ret = local_clk_enable(clk);
- spin_unlock_irqrestore(&global_clkregs_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required
- */
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&global_clkregs_lock, flags);
- local_clk_disable(clk);
- spin_unlock_irqrestore(&global_clkregs_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/*
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->get_rate(clk);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * clk_set_rate - set the clock rate for a clock source
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- /*
- * Most system clocks can only be enabled or disabled, with
- * the actual rate set as part of the peripheral dividers
- * instead of high level clock control
- */
- if (clk->set_rate)
- ret = clk->set_rate(clk, rate);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (clk->round_rate)
- rate = clk->round_rate(clk, rate);
- else
- rate = clk->get_rate(clk);
-
- return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*
- * clk_set_parent - set the parent clock source for this clock
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- /* Clock re-parenting is not supported */
- return -EINVAL;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/*
- * clk_get_parent - get the parent clock source for this clock
- */
-struct clk *clk_get_parent(struct clk *clk)
-{
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-static struct clk_lookup lookups[] = {
- CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz),
- CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397),
- CLKDEV_INIT(NULL, "osc_main", &osc_main),
- CLKDEV_INIT(NULL, "sys_ck", &clk_sys),
- CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll),
- CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll),
- CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk),
- CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk),
- CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0),
- CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1),
- CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2),
- CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3),
- CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9),
- CLKDEV_INIT("pl08xdmac", NULL, &clk_dma),
- CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt),
- CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm),
- CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm),
- CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3),
- CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4),
- CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5),
- CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6),
- CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0),
- CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1),
- CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2),
- CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0),
- CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1),
- CLKDEV_INIT("40050000.key", NULL, &clk_kscan),
- CLKDEV_INIT("20020000.flash", NULL, &clk_nand),
- CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc),
- CLKDEV_INIT("40048000.adc", NULL, &clk_adc),
- CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0),
- CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1),
- CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc),
- CLKDEV_INIT("20098000.sd", NULL, &clk_mmc),
- CLKDEV_INIT("31060000.ethernet", NULL, &clk_net),
- CLKDEV_INIT("dev:clcd", NULL, &clk_lcd),
- CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd),
- CLKDEV_INIT("31020000.ohci", "ck_usbd", &clk_usbd),
- CLKDEV_INIT("31020000.usbd", "ck_usb_otg", &clk_usb_otg_dev),
- CLKDEV_INIT("31020000.ohci", "ck_usb_otg", &clk_usb_otg_host),
- CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc),
-};
-
-static int __init clk_init(void)
-{
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /*
- * Setup muxed SYSCLK for HCLK PLL base -this selects the
- * parent clock used for the ARM PLL and is used to derive
- * the many system clock rates in the device.
- */
- if (clk_is_sysclk_mainosc() != 0)
- clk_sys.parent = &osc_main;
- else
- clk_sys.parent = &osc_pll397;
-
- clk_sys.rate = clk_sys.parent->rate;
-
- /* Compute the current ARM PLL and USB PLL frequencies */
- local_update_armpll_rate();
-
- /* Compute HCLK and PCLK bus rates */
- clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div();
- clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div();
-
- /*
- * Enable system clocks - this step is somewhat formal, as the
- * clocks are already running, but it does get the clock data
- * inline with the actual system state. Never disable these
- * clocks as they will only stop if the system is going to sleep.
- * In that case, the chip/system power management functions will
- * handle clock gating.
- */
- if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk))
- printk(KERN_ERR "Error enabling system HCLK and PCLK\n");
-
- /*
- * Timers 0 and 1 were enabled and are being used by the high
- * resolution tick function prior to this driver being initialized.
- * Tag them now as used.
- */
- if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1))
- printk(KERN_ERR "Error enabling timer tick clocks\n");
-
- return 0;
-}
-core_initcall(clk_init);
-
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index e6f03783ad73..b2f9e226febe 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -36,7 +36,6 @@
#include <linux/clk.h>
#include <linux/mtd/lpc32xx_slc.h>
#include <linux/mtd/lpc32xx_mlc.h>
-#include <linux/platform_data/gpio-lpc32xx.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -48,13 +47,6 @@
#include "common.h"
/*
- * Mapped GPIOLIB GPIOs
- */
-#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
-#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
-#define MMC_PWR_ENABLE_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5)
-
-/*
* AMBA LCD controller
*/
static struct clcd_panel conn_lcd_panel = {
@@ -97,20 +89,6 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb)
fb->fb.fix.smem_len = PANEL_SIZE;
fb->panel = &conn_lcd_panel;
- if (gpio_request(LCD_POWER_GPIO, "LCD power"))
- printk(KERN_ERR "Error requesting gpio %u",
- LCD_POWER_GPIO);
- else if (gpio_direction_output(LCD_POWER_GPIO, 1))
- printk(KERN_ERR "Error setting gpio %u to output",
- LCD_POWER_GPIO);
-
- if (gpio_request(BKL_POWER_GPIO, "LCD backlight power"))
- printk(KERN_ERR "Error requesting gpio %u",
- BKL_POWER_GPIO);
- else if (gpio_direction_output(BKL_POWER_GPIO, 1))
- printk(KERN_ERR "Error setting gpio %u to output",
- BKL_POWER_GPIO);
-
return 0;
}
@@ -126,29 +104,10 @@ static void lpc32xx_clcd_remove(struct clcd_fb *fb)
fb->fb.fix.smem_start);
}
-/*
- * On some early LCD modules (1307.0), the backlight logic is inverted.
- * For those board variants, swap the disable and enable states for
- * BKL_POWER_GPIO.
-*/
-static void clcd_disable(struct clcd_fb *fb)
-{
- gpio_set_value(BKL_POWER_GPIO, 0);
- gpio_set_value(LCD_POWER_GPIO, 0);
-}
-
-static void clcd_enable(struct clcd_fb *fb)
-{
- gpio_set_value(BKL_POWER_GPIO, 1);
- gpio_set_value(LCD_POWER_GPIO, 1);
-}
-
static struct clcd_board lpc32xx_clcd_data = {
.name = "Phytec LCD",
.check = clcdfb_check,
.decode = clcdfb_decode,
- .disable = clcd_disable,
- .enable = clcd_enable,
.setup = lpc32xx_clcd_setup,
.mmap = lpc32xx_clcd_mmap,
.remove = lpc32xx_clcd_remove,
@@ -187,20 +146,9 @@ static struct pl08x_platform_data pl08x_pd = {
.mem_buses = PL08X_AHB1,
};
-static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios)
-{
- /* Only on and off are supported */
- if (ios->power_mode == MMC_POWER_OFF)
- gpio_set_value(MMC_PWR_ENABLE_GPIO, 0);
- else
- gpio_set_value(MMC_PWR_ENABLE_GPIO, 1);
- return 0;
-}
-
static struct mmci_platform_data lpc32xx_mmci_data = {
.ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 |
MMC_VDD_32_33 | MMC_VDD_33_34,
- .ios_handler = mmc_handle_ios,
};
static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
@@ -259,7 +207,6 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
.atag_offset = 0x100,
.map_io = lpc32xx_map_io,
.init_irq = lpc32xx_init_irq,
- .init_time = lpc32xx_timer_init,
.init_machine = lpc3250_machine_init,
.dt_compat = lpc32xx_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 05621a29fba2..1931229a1eaa 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -76,9 +76,6 @@ void __init lpc32xx_serial_init(void)
unsigned int puart;
int i, j;
- /* UART clocks are off, let clock driver manage them */
- __raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL);
-
for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
if (!IS_ERR(clk)) {
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
deleted file mode 100644
index ff3499d1fb1a..000000000000
--- a/arch/arm/mach-lpc32xx/timer.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/timer.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2009 - 2010 NXP Semiconductors
- * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven
- * Ed Schouten <e.schouten@fontys.nl>
- * Laurens Timmermans <l.timmermans@fontys.nl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/err.h>
-#include <linux/clockchips.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "common.h"
-
-static int lpc32xx_clkevt_next_event(unsigned long delta,
- struct clock_event_device *dev)
-{
- __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
- LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
- __raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
- __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
- LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-
- return 0;
-}
-
-static int lpc32xx_shutdown(struct clock_event_device *evt)
-{
- /*
- * Disable the timer. When using oneshot, we must also
- * disable the timer to wait for the first call to
- * set_next_event().
- */
- __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
- return 0;
-}
-
-static struct clock_event_device lpc32xx_clkevt = {
- .name = "lpc32xx_clkevt",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .rating = 300,
- .set_next_event = lpc32xx_clkevt_next_event,
- .set_state_shutdown = lpc32xx_shutdown,
- .set_state_oneshot = lpc32xx_shutdown,
-};
-
-static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &lpc32xx_clkevt;
-
- /* Clear match */
- __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
- LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction lpc32xx_timer_irq = {
- .name = "LPC32XX Timer Tick",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = lpc32xx_timer_interrupt,
-};
-
-/*
- * The clock management driver isn't initialized at this point, so the
- * clocks need to be enabled here manually and then tagged as used in
- * the clock driver initialization
- */
-void __init lpc32xx_timer_init(void)
-{
- u32 clkrate, pllreg;
-
- /* Enable timer clock */
- __raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN |
- LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
- LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1);
-
- /*
- * The clock driver isn't initialized at this point. So determine if
- * the SYSCLK is driven from the PLL397 or main oscillator and then use
- * it to compute the PLL frequency and the PCLK divider to get the base
- * timer rates. This rate is needed to compute the tick rate.
- */
- if (clk_is_sysclk_mainosc() != 0)
- clkrate = LPC32XX_MAIN_OSC_FREQ;
- else
- clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ;
-
- /* Get ARM HCLKPLL register and convert it into a frequency */
- pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
- clkrate = clk_get_pllrate_from_reg(clkrate, pllreg);
-
- /* Get PCLK divider and divide ARM PLL clock by it to get timer rate */
- clkrate = clkrate / clk_get_pclk_div();
-
- /* Initial timer setup */
- __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
- __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
- LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
- __raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
- __raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) |
- LPC32XX_TIMER_CNTR_MCR_STOP(0) |
- LPC32XX_TIMER_CNTR_MCR_RESET(0),
- LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
-
- /* Setup tick interrupt */
- setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
-
- /* Setup the clockevent structure. */
- lpc32xx_clkevt.cpumask = cpumask_of(0);
- clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1);
-
- /* Use timer1 as clock source. */
- __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
- LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
- __raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
- __raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
- __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
- LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-
- clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
- "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
-}