Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 359 deletions

diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
deleted file mode 100644
index 9968239d8041..000000000000
--- a/arch/arm/mach-mmp/devices.c
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/devices.c
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-
-#include <asm/irq.h>
-#include "irqs.h"
-#include "devices.h"
-#include <linux/soc/mmp/cputype.h>
-#include "regs-usb.h"
-
-int __init mmp_register_device(struct mmp_device_desc *desc,
-				void *data, size_t size)
-{
-	struct platform_device *pdev;
-	struct resource res[2 + MAX_RESOURCE_DMA];
-	int i, ret = 0, nres = 0;
-
-	pdev = platform_device_alloc(desc->drv_name, desc->id);
-	if (pdev == NULL)
-		return -ENOMEM;
-
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
-	memset(res, 0, sizeof(res));
-
-	if (desc->start != -1ul && desc->size > 0) {
-		res[nres].start	= desc->start;
-		res[nres].end	= desc->start + desc->size - 1;
-		res[nres].flags	= IORESOURCE_MEM;
-		nres++;
-	}
-
-	if (desc->irq != NO_IRQ) {
-		res[nres].start	= desc->irq;
-		res[nres].end	= desc->irq;
-		res[nres].flags	= IORESOURCE_IRQ;
-		nres++;
-	}
-
-	for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
-		if (desc->dma[i] == 0)
-			break;
-
-		res[nres].start	= desc->dma[i];
-		res[nres].end	= desc->dma[i];
-		res[nres].flags	= IORESOURCE_DMA;
-	}
-
-	ret = platform_device_add_resources(pdev, res, nres);
-	if (ret) {
-		platform_device_put(pdev);
-		return ret;
-	}
-
-	if (data && size) {
-		ret = platform_device_add_data(pdev, data, size);
-		if (ret) {
-			platform_device_put(pdev);
-			return ret;
-		}
-	}
-
-	return platform_device_add(pdev);
-}
-
-#if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
-#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
-
-/*****************************************************************************
- * The registers read/write routines
- *****************************************************************************/
-
-static unsigned int u2o_get(void __iomem *base, unsigned int offset)
-{
-	return readl_relaxed(base + offset);
-}
-
-static void u2o_set(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(base + offset);
-	reg |= value;
-	writel_relaxed(reg, base + offset);
-	readl_relaxed(base + offset);
-}
-
-static void u2o_clear(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(base + offset);
-	reg &= ~value;
-	writel_relaxed(reg, base + offset);
-	readl_relaxed(base + offset);
-}
-
-static void u2o_write(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	writel_relaxed(value, base + offset);
-	readl_relaxed(base + offset);
-}
-
-
-static DEFINE_MUTEX(phy_lock);
-static int phy_init_cnt;
-
-static int usb_phy_init_internal(void __iomem *base)
-{
-	int loops;
-
-	pr_info("Init usb phy!!!\n");
-
-	/* Initialize the USB PHY power */
-	if (cpu_is_pxa910()) {
-		u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
-			| (1<<UTMI_CTRL_PU_REF_SHIFT));
-	}
-
-	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-
-	/* UTMI_PLL settings */
-	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
-		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
-		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
-		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
-
-	u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
-		| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
-		| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
-		| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
-
-	/* UTMI_TX */
-	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
-		| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
-		| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
-		| UTMI_TX_AMP_MASK);
-	u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
-		| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
-		| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
-
-	/* UTMI_RX */
-	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
-		| UTMI_REG_SQ_LENGTH_MASK);
-	u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
-		| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
-
-	/* UTMI_IVREF */
-	if (cpu_is_pxa168())
-		/* fixing Microsoft Altair board interface with NEC hub issue -
-		 * Set UTMI_IVREF from 0x4a3 to 0x4bf */
-		u2o_write(base, UTMI_IVREF, 0x4bf);
-
-	/* toggle VCOCAL_START bit of UTMI_PLL */
-	udelay(200);
-	u2o_set(base, UTMI_PLL, VCOCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_PLL, VCOCAL_START);
-
-	/* toggle REG_RCAL_START bit of UTMI_TX */
-	udelay(400);
-	u2o_set(base, UTMI_TX, REG_RCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_TX, REG_RCAL_START);
-	udelay(400);
-
-	/* Make sure PHY PLL is ready */
-	loops = 0;
-	while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
-		mdelay(1);
-		loops++;
-		if (loops > 100) {
-			printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
-				u2o_get(base, UTMI_PLL));
-			break;
-		}
-	}
-
-	if (cpu_is_pxa168()) {
-		u2o_set(base, UTMI_RESERVE, 1 << 5);
-		/* Turn on UTMI PHY OTG extension */
-		u2o_write(base, UTMI_OTG_ADDON, 1);
-	}
-
-	return 0;
-}
-
-static int usb_phy_deinit_internal(void __iomem *base)
-{
-	pr_info("Deinit usb phy!!!\n");
-
-	if (cpu_is_pxa168())
-		u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
-
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
-	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-
-	return 0;
-}
-
-int pxa_usb_phy_init(void __iomem *phy_reg)
-{
-	mutex_lock(&phy_lock);
-	if (phy_init_cnt++ == 0)
-		usb_phy_init_internal(phy_reg);
-	mutex_unlock(&phy_lock);
-	return 0;
-}
-
-void pxa_usb_phy_deinit(void __iomem *phy_reg)
-{
-	WARN_ON(phy_init_cnt == 0);
-
-	mutex_lock(&phy_lock);
-	if (--phy_init_cnt == 0)
-		usb_phy_deinit_internal(phy_reg);
-	mutex_unlock(&phy_lock);
-}
-#endif
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-static u64 __maybe_unused usb_dma_mask = ~(u32)0;
-
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
-static struct resource pxa168_usb_phy_resources[] = {
-	[0] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa168_device_usb_phy = {
-	.name		= "pxa-usb-phy",
-	.id		= -1,
-	.resource	= pxa168_usb_phy_resources,
-	.num_resources	= ARRAY_SIZE(pxa168_usb_phy_resources),
-	.dev		=  {
-		.dma_mask	= &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-#endif /* CONFIG_PHY_PXA_USB */
-
-#if IS_ENABLED(CONFIG_USB_MV_UDC)
-static struct resource pxa168_u2o_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2o = {
-	.name		= "mv-udc",
-	.id		= -1,
-	.resource	= pxa168_u2o_resources,
-	.num_resources	= ARRAY_SIZE(pxa168_u2o_resources),
-	.dev		=  {
-		.dma_mask	= &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-#endif /* CONFIG_USB_MV_UDC */
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-static struct resource pxa168_u2oehci_resources[] = {
-	[0] = {
-		.start	= PXA168_U2O_REGBASE,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2oehci = {
-	.name		= "pxa-u2oehci",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &usb_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-
-	.num_resources	= ARRAY_SIZE(pxa168_u2oehci_resources),
-	.resource	= pxa168_u2oehci_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_OTG)
-static struct resource pxa168_u2ootg_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2ootg = {
-	.name		= "mv-otg",
-	.id		= -1,
-	.dev  = {
-		.dma_mask          = &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-
-	.num_resources	= ARRAY_SIZE(pxa168_u2ootg_resources),
-	.resource      = pxa168_u2ootg_resources,
-};
-#endif /* CONFIG_USB_MV_OTG */
-
-#endif