Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 366 deletions

diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
deleted file mode 100644
index f21e15c7b973..000000000000
--- a/arch/arm/mach-omap1/board-fsample.c
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-fsample.c
- *
- * Modified from board-perseus2.c
- *
- * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
- * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/soc/ti/omap1-io.h>
-#include <linux/platform_data/keypad-omap.h>
-#include "tc.h"
-
-#include "mux.h"
-#include "flash.h"
-#include "hardware.h"
-#include "iomap.h"
-#include "common.h"
-#include "fpga.h"
-
-/* fsample is pretty close to p2-sample */
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE    0xE8100000
-#define FSAMPLE_CPLD_SIZE    SZ_4K
-#define FSAMPLE_CPLD_START   0x05080000
-
-#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET         0
-#define FSAMPLE_CPLD_BIT_LCD_RESET        1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
-#define FSAMPLE_CPLD_BIT_OTG_RESET        9
-
-#define fsample_cpld_set(bit) \
-    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
-    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-static const unsigned int fsample_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_LEFT),
-	KEY(3, 0, KEY_DOWN),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_F10),
-	KEY(1, 1, KEY_SEND),
-	KEY(2, 1, KEY_END),
-	KEY(3, 1, KEY_VOLUMEDOWN),
-	KEY(4, 1, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_RECORD),
-	KEY(0, 2, KEY_F9),
-	KEY(1, 2, KEY_3),
-	KEY(2, 2, KEY_6),
-	KEY(3, 2, KEY_9),
-	KEY(4, 2, KEY_KPDOT),
-	KEY(0, 3, KEY_BACK),
-	KEY(1, 3, KEY_2),
-	KEY(2, 3, KEY_5),
-	KEY(3, 3, KEY_8),
-	KEY(4, 3, KEY_0),
-	KEY(5, 3, KEY_KPSLASH),
-	KEY(0, 4, KEY_HOME),
-	KEY(1, 4, KEY_1),
-	KEY(2, 4, KEY_4),
-	KEY(3, 4, KEY_7),
-	KEY(4, 4, KEY_KPASTERISK),
-	KEY(5, 4, KEY_POWER),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
-		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_7XX_MPU_EXT_NIRQ,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static void __init fsample_init_smc91x(void)
-{
-	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	},
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-#define FSAMPLE_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data nand_data = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-	},
-};
-
-static struct resource nand_resource = {
-	.start		= OMAP_CS3_PHYS,
-	.end		= OMAP_CS3_PHYS + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data fsample_keymap_data = {
-	.keymap		= fsample_keymap,
-	.keymap_size	= ARRAY_SIZE(fsample_keymap),
-};
-
-static struct omap_kp_platform_data kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &fsample_keymap_data,
-	.delay		= 4,
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-	&smc91x_device,
-	&kp_device,
-};
-
-static const struct omap_lcd_config fsample_lcd_config = {
-	.ctrl_name	= "internal",
-};
-
-static void __init omap_fsample_init(void)
-{
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
-			OMAP7XX_IO_CONF_9);
-
-	fsample_init_smc91x();
-
-	BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(E2_7XX_KBR0);
-	omap_cfg_reg(J7_7XX_KBR1);
-	omap_cfg_reg(E1_7XX_KBR2);
-	omap_cfg_reg(F3_7XX_KBR3);
-	omap_cfg_reg(D2_7XX_KBR4);
-	omap_cfg_reg(C2_7XX_KBC0);
-	omap_cfg_reg(D3_7XX_KBC1);
-	omap_cfg_reg(E4_7XX_KBC2);
-	omap_cfg_reg(F4_7XX_KBC3);
-	omap_cfg_reg(E3_7XX_KBC4);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&fsample_lcd_config);
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_fsample_io_desc[] __initdata = {
-	{
-		.virtual	= H2P2_DBG_FPGA_BASE,
-		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
-		.length		= H2P2_DBG_FPGA_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= FSAMPLE_CPLD_BASE,
-		.pfn		= __phys_to_pfn(FSAMPLE_CPLD_START),
-		.length		= FSAMPLE_CPLD_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init omap_fsample_map_io(void)
-{
-	omap15xx_map_io();
-	iotable_init(omap_fsample_io_desc,
-		     ARRAY_SIZE(omap_fsample_io_desc));
-}
-
-MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
-/* Maintainer: Brian Swetland <swetland@google.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap_fsample_map_io,
-	.init_early	= omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_fsample_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END