summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1/board-h2.c
diff options
context:
space:
mode:
authorJarkko Nikula <jarkko.nikula@bitmer.com>2013-06-15 12:31:08 +0400
committerTony Lindgren <tony@atomide.com>2013-06-18 11:12:34 +0400
commitb6a85477d7abf6bdb299860a066b6c66a5c6a7dd (patch)
treeae465b452a472c3fe6b450c328bdd8f8c8c9ca5d /arch/arm/mach-omap1/board-h2.c
parentbf2920aa57f339b3901172ca35fbbf303acf8e16 (diff)
downloadlinux-b6a85477d7abf6bdb299860a066b6c66a5c6a7dd.tar.xz
ARM: OMAP1: Remove legacy irda.h and irda setup from board files
omap-ir.c driver has never been upstream and was also removed from linux-omap.git four years ago (See linux-omap.git commit efd1e3f ("REMOVE OMAP LEGACY CODE: Reset drivers/net/irda to mainline")). Therefore remove needless device registration from a few board files and delete thus to be unused arch/arm/mach-omap1/include/mach/irda.h and unused OMAP_DMA_UART3_* definitions from dma.h. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap1/board-h2.c')
-rw-r--r--arch/arm/mach-omap1/board-h2.c36
1 files changed, 0 insertions, 36 deletions
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 0dac3d239e32..fd90cafc2e36 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -41,7 +41,6 @@
#include <mach/mux.h>
#include <linux/omap-dma.h>
#include <mach/tc.h>
-#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/flash.h>
@@ -50,7 +49,6 @@
#include "common.h"
#include "board-h2.h"
-#include "dma.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START 0x04000300
@@ -276,39 +274,6 @@ static struct platform_device h2_kp_device = {
.resource = h2_kp_resources,
};
-#define H2_IRDA_FIRSEL_GPIO_PIN 17
-
-static struct omap_irda_config h2_irda_data = {
- .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
- .rx_channel = OMAP_DMA_UART3_RX,
- .tx_channel = OMAP_DMA_UART3_TX,
- .dest_start = UART3_THR,
- .src_start = UART3_RHR,
- .tx_trigger = 0,
- .rx_trigger = 0,
-};
-
-static struct resource h2_irda_resources[] = {
- [0] = {
- .start = INT_UART3,
- .end = INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 irda_dmamask = 0xffffffff;
-
-static struct platform_device h2_irda_device = {
- .name = "omapirda",
- .id = 0,
- .dev = {
- .platform_data = &h2_irda_data,
- .dma_mask = &irda_dmamask,
- },
- .num_resources = ARRAY_SIZE(h2_irda_resources),
- .resource = h2_irda_resources,
-};
-
static struct gpio_led h2_gpio_led_pins[] = {
{
.name = "h2:red",
@@ -339,7 +304,6 @@ static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
&h2_nand_device,
&h2_smc91x_device,
- &h2_irda_device,
&h2_kp_device,
&h2_gpio_leds,
};