summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1
diff options
context:
space:
mode:
authorJanusz Krzysztofik <jmkrzyszt@gmail.com>2018-11-23 14:19:45 +0300
committerTony Lindgren <tony@atomide.com>2018-12-07 19:26:53 +0300
commit2afdb4c41d7876e430b9bc6e2d7e2fe28609fd6a (patch)
tree51743d37ac81dd9883439efce35defc3592a0cfa /arch/arm/mach-omap1
parent651022382c7f8da46cb4872a545ee1da6d097d2a (diff)
downloadlinux-2afdb4c41d7876e430b9bc6e2d7e2fe28609fd6a.tar.xz
ARM: OMAP1: ams-delta: Fix audio permanently muted
Since commit 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused GPIOs"), on-board audio has appeared muted. Believed to be unused GPIO pin "hookflash1", apparently set high regardless of the corresponding bit of "latch2" port attempted to be set low during .init_machine(), has been identified as the reason. According to Amstrad E3 wiki, the purpose of the pin hasn't been clearly identified. Original Amstrad software used to produce a high pulse on it when the phone was taken off hook or recall was pressed. With the current finding, we can assume the pin provides a kind of audio mute function. Proper resolution of the issue should be done in two steps: - resolution of an issue with the pin state not reflecting the value the corresponding bit of the port was attempted to be initialized with, - extension of on-board audio driver with a new control. For now, rename the pin to "audio_mute" to reflect its function and, as a quick fix, hogg it as output low so on-board audio can produce audible sound again. Fixes: 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused GPIOs") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap1')
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c6
1 files changed, 4 insertions, 2 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 3d191fd52910..1d801f5e8308 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -247,8 +247,8 @@ static struct platform_device latch2_gpio_device = {
#define LATCH2_PIN_SCARD_CMDVCC 11
#define LATCH2_PIN_MODEM_NRESET 12
#define LATCH2_PIN_MODEM_CODEC 13
-#define LATCH2_PIN_HOOKFLASH1 14
-#define LATCH2_PIN_HOOKFLASH2 15
+#define LATCH2_PIN_AUDIO_MUTE 14
+#define LATCH2_PIN_HOOKFLASH 15
static struct regulator_consumer_supply modem_nreset_consumers[] = {
REGULATOR_SUPPLY("RESET#", "serial8250.1"),
@@ -588,6 +588,8 @@ static int gpiochip_match_by_label(struct gpio_chip *chip, void *data)
static struct gpiod_hog ams_delta_gpio_hogs[] = {
GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout",
GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
+ GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_AUDIO_MUTE, "audio_mute",
+ GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
{},
};