summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/board-igep0020.c
diff options
context:
space:
mode:
authorJavier Martinez Canillas <javier@dowhile0.org>2012-05-10 01:19:14 +0400
committerTony Lindgren <tony@atomide.com>2012-05-10 01:19:14 +0400
commita42cf2c6c6ea0ec0237d555b95467c149e20e696 (patch)
tree10ebf21470817ee254dea7b780d4c46aa7dc567e /arch/arm/mach-omap2/board-igep0020.c
parent8259573b322ee87d4aad26d4a3ecb737b94da272 (diff)
downloadlinux-a42cf2c6c6ea0ec0237d555b95467c149e20e696.tar.xz
ARM: OMAP3: igep0020: Add support for Micron NAND Flash storage memory
IGEP-based boards can have two different flash memories, a OneNAND or a NAND device. The boot configuration pins (sys_boot) are used to specify which memory is available. Also, this patch removes unnecesary code for registering the OneNAND. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> [tony@atomide.com: fixed up a minor checkpatch warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap2/board-igep0020.c')
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c74
1 files changed, 31 insertions, 43 deletions
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 930c0d380435..16ec5c89e035 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -24,6 +24,8 @@
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
+#include <linux/mtd/nand.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -39,6 +41,8 @@
#include "hsmmc.h"
#include "sdram-numonyx-m65kxxxxam.h"
#include "common-board-devices.h"
+#include "board-flash.h"
+#include "control.h"
#define IGEP2_SMSC911X_CS 5
#define IGEP2_SMSC911X_GPIO 176
@@ -60,6 +64,10 @@
#define IGEP3_GPIO_LED1_RED 16
#define IGEP3_GPIO_USBH_NRESET 183
+#define IGEP_SYSBOOT_MASK 0x1f
+#define IGEP_SYSBOOT_NAND 0x0f
+#define IGEP_SYSBOOT_ONENAND 0x10
+
/*
* IGEP2 Hardware Revision Table
*
@@ -110,8 +118,10 @@ static void __init igep2_get_revision(void)
gpio_free(IGEP2_GPIO_LED1_RED);
}
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
- defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) || \
+ defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE)
#define ONENAND_MAP 0x20000000
@@ -123,7 +133,7 @@ static void __init igep2_get_revision(void)
* So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
*/
-static struct mtd_partition igep_onenand_partitions[] = {
+static struct mtd_partition igep_flash_partitions[] = {
{
.name = "X-Loader",
.offset = 0,
@@ -151,50 +161,28 @@ static struct mtd_partition igep_onenand_partitions[] = {
},
};
-static struct omap_onenand_platform_data igep_onenand_data = {
- .parts = igep_onenand_partitions,
- .nr_parts = ARRAY_SIZE(igep_onenand_partitions),
- .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
-};
-
-static struct platform_device igep_onenand_device = {
- .name = "omap2-onenand",
- .id = -1,
- .dev = {
- .platform_data = &igep_onenand_data,
- },
-};
+static inline u32 igep_get_sysboot_value(void)
+{
+ return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK;
+}
static void __init igep_flash_init(void)
{
- u8 cs = 0;
- u8 onenandcs = GPMC_CS_NUM + 1;
-
- for (cs = 0; cs < GPMC_CS_NUM; cs++) {
- u32 ret;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- /* Check if NAND/oneNAND is configured */
- if ((ret & 0xC00) == 0x800)
- /* NAND found */
- pr_err("IGEP: Unsupported NAND found\n");
- else {
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
- if ((ret & 0x3F) == (ONENAND_MAP >> 24))
- /* ONENAND found */
- onenandcs = cs;
- }
- }
-
- if (onenandcs > GPMC_CS_NUM) {
- pr_err("IGEP: Unable to find configuration in GPMC\n");
- return;
+ u32 mux;
+ mux = igep_get_sysboot_value();
+
+ if (mux == IGEP_SYSBOOT_NAND) {
+ pr_info("IGEP: initializing NAND memory device\n");
+ board_nand_init(igep_flash_partitions,
+ ARRAY_SIZE(igep_flash_partitions),
+ 0, NAND_BUSWIDTH_16);
+ } else if (mux == IGEP_SYSBOOT_ONENAND) {
+ pr_info("IGEP: initializing OneNAND memory device\n");
+ board_onenand_init(igep_flash_partitions,
+ ARRAY_SIZE(igep_flash_partitions), 0);
+ } else {
+ pr_err("IGEP: Flash: unsupported sysboot sequence found\n");
}
-
- igep_onenand_data.cs = onenandcs;
-
- if (platform_device_register(&igep_onenand_device) < 0)
- pr_err("IGEP: Unable to register OneNAND device\n");
}
#else