summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/i2c.c
diff options
context:
space:
mode:
authorAvinash.H.M <avinashhm@ti.com>2011-07-10 15:27:16 +0400
committerPaul Walmsley <paul@pwsan.com>2011-07-10 15:27:16 +0400
commit6d3c55fd4f0f94a9455d30df9414ddb0f755f402 (patch)
tree7b1838e66fa1a424db45c84855062df121b9506b /arch/arm/mach-omap2/i2c.c
parent4d4441a6221ca3a30290045b7b696e5134646449 (diff)
downloadlinux-6d3c55fd4f0f94a9455d30df9414ddb0f755f402.tar.xz
OMAP: hwmod: fix the i2c-reset timeout during bootup
The sequence of _ocp_softreset doesn't work for i2c. The i2c module has a special sequence to reset the module. The sequence is - Disable the I2C. - Write to SOFTRESET bit. - Enable the I2C. - Poll on the RESETDONE bit. The sequence is implemented as a function and the i2c_class is updated with the correct 'reset' pointer. omap_hwmod_softreset function is implemented which triggers the softreset by writing into sysconfig register. On following this sequence, i2c module resets properly and timeouts are not seen. Cc: Rajendra Nayak <rnayak@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Avinash.H.M <avinashhm@ti.com> [paul@pwsan.com: combined this patch with a patch to remove HWMOD_INIT_NO_RESET from the 44xx hwmod flags; change register offset conditional code to use the IP block revision; minor code cleanup] Signed-off-by: Paul Walmsley <paul@pwsan.com>
Diffstat (limited to 'arch/arm/mach-omap2/i2c.c')
-rw-r--r--arch/arm/mach-omap2/i2c.c68
1 files changed, 68 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 79c478c4cb1c..ace99944e96f 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -21,9 +21,19 @@
#include <plat/cpu.h>
#include <plat/i2c.h>
+#include <plat/common.h>
+#include <plat/omap_hwmod.h>
#include "mux.h"
+/* In register I2C_CON, Bit 15 is the I2C enable bit */
+#define I2C_EN BIT(15)
+#define OMAP2_I2C_CON_OFFSET 0x24
+#define OMAP4_I2C_CON_OFFSET 0xA4
+
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT 10000
+
void __init omap2_i2c_mux_pins(int bus_id)
{
char mux_name[sizeof("i2c2_scl.i2c2_scl")];
@@ -37,3 +47,61 @@ void __init omap2_i2c_mux_pins(int bus_id)
sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
}
+
+/**
+ * omap_i2c_reset - reset the omap i2c module.
+ * @oh: struct omap_hwmod *
+ *
+ * The i2c moudle in omap2, omap3 had a special sequence to reset. The
+ * sequence is:
+ * - Disable the I2C.
+ * - Write to SOFTRESET bit.
+ * - Enable the I2C.
+ * - Poll on the RESETDONE bit.
+ * The sequence is implemented in below function. This is called for 2420,
+ * 2430 and omap3.
+ */
+int omap_i2c_reset(struct omap_hwmod *oh)
+{
+ u32 v;
+ u16 i2c_con;
+ int c = 0;
+
+ if (oh->class->rev == OMAP_I2C_IP_VERSION_2) {
+ i2c_con = OMAP4_I2C_CON_OFFSET;
+ } else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) {
+ i2c_con = OMAP2_I2C_CON_OFFSET;
+ } else {
+ WARN(1, "Cannot reset I2C block %s: unsupported revision\n",
+ oh->name);
+ return -EINVAL;
+ }
+
+ /* Disable I2C */
+ v = omap_hwmod_read(oh, i2c_con);
+ v &= ~I2C_EN;
+ omap_hwmod_write(v, oh, i2c_con);
+
+ /* Write to the SOFTRESET bit */
+ omap_hwmod_softreset(oh);
+
+ /* Enable I2C */
+ v = omap_hwmod_read(oh, i2c_con);
+ v |= I2C_EN;
+ omap_hwmod_write(v, oh, i2c_con);
+
+ /* Poll on RESETDONE bit */
+ omap_test_timeout((omap_hwmod_read(oh,
+ oh->class->sysc->syss_offs)
+ & SYSS_RESETDONE_MASK),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+
+ if (c == MAX_MODULE_SOFTRESET_WAIT)
+ pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+ __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+ else
+ pr_debug("%s: %s: softreset in %d usec\n", __func__,
+ oh->name, c);
+
+ return 0;
+}