summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/vc.c
diff options
context:
space:
mode:
authorKevin Hilman <khilman@ti.com>2011-06-03 04:28:13 +0400
committerKevin Hilman <khilman@ti.com>2011-09-15 23:08:58 +0400
commit8abc0b58fdb89124d8278f110f523b27c666d36c (patch)
tree7f48f3ab775b32adb21f1a1941fdeb18bd0e23e8 /arch/arm/mach-omap2/vc.c
parentf5395480f5088a86cc8594d29b5c2f07f6995c3d (diff)
downloadlinux-8abc0b58fdb89124d8278f110f523b27c666d36c.tar.xz
OMAP3+: PM: VC: handle mutant channel config for OMAP4 MPU channel
On OMAP3+, all VC channels have the the same bitfield ordering for all VC channels, except the OMAP4 MPU channel. This appears to be a freak accident as all other VC channel (including OMAP5) have the standard configuration. Handle the mutant case by adding a per-channel flag to signal the deformity and handle it during VC init. Special thanks to Nishanth Menon <nm@ti.com> for finding this problem and for proposing the initial solution. Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
Diffstat (limited to 'arch/arm/mach-omap2/vc.c')
-rw-r--r--arch/arm/mach-omap2/vc.c64
1 files changed, 51 insertions, 13 deletions
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 5d545632388d..f53d1f5acce1 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -19,17 +19,51 @@
#include "prm-regbits-44xx.h"
#include "prm44xx.h"
-/*
- * Channel configuration bits, common for OMAP3 & 4
+/**
+ * struct omap_vc_channel_cfg - describe the cfg_channel bitfield
+ * @sa: bit for slave address
+ * @rav: bit for voltage configuration register
+ * @rac: bit for command configuration register
+ * @racen: enable bit for RAC
+ * @cmd: bit for command value set selection
+ *
+ * Channel configuration bits, common for OMAP3+
* OMAP3 register: PRM_VC_CH_CONF
* OMAP4 register: PRM_VC_CFG_CHANNEL
+ * OMAP5 register: PRM_VC_SMPS_<voltdm>_CONFIG
*/
-#define CFG_CHANNEL_SA BIT(0)
-#define CFG_CHANNEL_RAV BIT(1)
-#define CFG_CHANNEL_RAC BIT(2)
-#define CFG_CHANNEL_RACEN BIT(3)
-#define CFG_CHANNEL_CMD BIT(4)
-#define CFG_CHANNEL_MASK 0x3f
+struct omap_vc_channel_cfg {
+ u8 sa;
+ u8 rav;
+ u8 rac;
+ u8 racen;
+ u8 cmd;
+};
+
+static struct omap_vc_channel_cfg vc_default_channel_cfg = {
+ .sa = BIT(0),
+ .rav = BIT(1),
+ .rac = BIT(2),
+ .racen = BIT(3),
+ .cmd = BIT(4),
+};
+
+/*
+ * On OMAP3+, all VC channels have the above default bitfield
+ * configuration, except the OMAP4 MPU channel. This appears
+ * to be a freak accident as every other VC channel has the
+ * default configuration, thus creating a mutant channel config.
+ */
+static struct omap_vc_channel_cfg vc_mutant_channel_cfg = {
+ .sa = BIT(0),
+ .rav = BIT(2),
+ .rac = BIT(3),
+ .racen = BIT(4),
+ .cmd = BIT(1),
+};
+
+static struct omap_vc_channel_cfg *vc_cfg_bits;
+#define CFG_CHANNEL_MASK 0x1f
/**
* omap_vc_config_channel - configure VC channel to PMIC mappings
@@ -56,7 +90,7 @@ static int omap_vc_config_channel(struct voltagedomain *voltdm)
* All others must stay at zero (see function comment above.)
*/
if (vc->flags & OMAP_VC_CHANNEL_DEFAULT)
- vc->cfg_channel &= CFG_CHANNEL_RACEN;
+ vc->cfg_channel &= vc_cfg_bits->racen;
voltdm->rmw(CFG_CHANNEL_MASK << vc->cfg_channel_sa_shift,
vc->cfg_channel << vc->cfg_channel_sa_shift,
@@ -292,6 +326,10 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
}
vc->cfg_channel = 0;
+ if (vc->flags & OMAP_VC_CHANNEL_CFG_MUTANT)
+ vc_cfg_bits = &vc_mutant_channel_cfg;
+ else
+ vc_cfg_bits = &vc_default_channel_cfg;
/* get PMIC/board specific settings */
vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr;
@@ -303,7 +341,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
voltdm->rmw(vc->smps_sa_mask,
vc->i2c_slave_addr << __ffs(vc->smps_sa_mask),
vc->common->smps_sa_reg);
- vc->cfg_channel |= CFG_CHANNEL_SA;
+ vc->cfg_channel |= vc_cfg_bits->sa;
/*
* Configure the PMIC register addresses.
@@ -311,13 +349,13 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
voltdm->rmw(vc->smps_volra_mask,
vc->volt_reg_addr << __ffs(vc->smps_volra_mask),
vc->common->smps_volra_reg);
- vc->cfg_channel |= CFG_CHANNEL_RAV;
+ vc->cfg_channel |= vc_cfg_bits->rav;
if (vc->cmd_reg_addr) {
voltdm->rmw(vc->smps_cmdra_mask,
vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask),
vc->common->smps_cmdra_reg);
- vc->cfg_channel |= CFG_CHANNEL_RAC | CFG_CHANNEL_RACEN;
+ vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen;
}
/* Set up the on, inactive, retention and off voltage */
@@ -330,7 +368,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
(ret_vsel << vc->common->cmd_ret_shift) |
(off_vsel << vc->common->cmd_off_shift));
voltdm->write(val, vc->cmdval_reg);
- vc->cfg_channel |= CFG_CHANNEL_CMD;
+ vc->cfg_channel |= vc_cfg_bits->cmd;
/* Channel configuration */
omap_vc_config_channel(voltdm);