Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 1 insertions, 570 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 03e25af6f48c..10e472f4fa43 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,10 +16,6 @@ menuconfig ARCH_PXA
 
 if ARCH_PXA
 
-menu "Intel PXA2xx/PXA3xx Implementations"
-
-comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
-
 config MACH_PXA25X_DT
 	bool "Support PXA25x platforms from device tree"
 	select PINCTRL
@@ -58,115 +54,7 @@ config MACH_PXA3XX_DT
 
 if ATAGS
 
-config ARCH_LUBBOCK
-	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
-	depends on UNUSED_BOARD_FILES
-	select GPIO_REG
-	select PXA25x
-	select SA1111
-
-config MACH_MAINSTONE
-	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
-	depends on UNUSED_BOARD_FILES
-	select GPIO_REG
-	select PXA27x
-
-config MACH_ZYLONITE
-	bool
-	select PXA3xx
-
-config MACH_ZYLONITE300
-	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA300
-	select CPU_PXA310
-	select MACH_ZYLONITE
-
-config MACH_ZYLONITE320
-	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA320
-	select MACH_ZYLONITE
-
-config MACH_LITTLETON
-	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA300
-	select CPU_PXA310
-	select PXA3xx
-
-config MACH_TAVOREVB
-	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA930
-	select CPU_PXA935
-	select PXA3xx
-	select FB
-	select FB_PXA
-
-config MACH_SAAR
-	bool "PXA930 Handheld Platform (aka SAAR)"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA930
-	select CPU_PXA935
-	select PXA3xx
-	select FB
-	select FB_PXA
-
-comment "Third Party Dev Platforms (sorted by vendor name)"
-
-config ARCH_PXA_IDP
-	bool "Accelent Xscale IDP"
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-
-config ARCH_VIPER
-	bool "Arcom/Eurotech VIPER SBC"
-	depends on UNUSED_BOARD_FILES
-	select ARCOM_PCMCIA
-	select I2C_GPIO if I2C=y
-	select ISA
-	select PXA25x
-
-config MACH_ARCOM_ZEUS
-	bool "Arcom/Eurotech ZEUS SBC"
-	depends on UNUSED_BOARD_FILES
-	select ARCOM_PCMCIA
-	select ISA
-	select PXA27x
-
-config MACH_BALLOON3
-	bool "Balloon 3 board"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_CSB726
-	bool "Enable Cogent CSB726 System On a Module"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Cogent
-	  CSB726 System On Module.
-
-config CSB726_CSB701
-	bool "Enable support for CSB701 baseboard"
-	depends on UNUSED_BOARD_FILES
-	depends on MACH_CSB726
-
-config MACH_CM_X300
-	bool "CompuLab CM-X300 modules"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA300
-	select CPU_PXA310
-	select PXA3xx
-
-config MACH_CAPC7117
-	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA320
-	select PXA3xx
+comment "Legacy board files"
 
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
@@ -187,307 +75,6 @@ config GUMSTIX_AM300EPD
 
 endchoice
 
-config MACH_XCEP
-	bool "Iskratel Electronics XCEP"
-	depends on UNUSED_BOARD_FILES
-	select MTD
-	select MTD_CFI
-	select MTD_CFI_INTELEXT
-	select MTD_PHYSMAP
-	select PXA25x
-	help
-	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
-	  Tuned for usage in Libera instruments for particle accelerators.
-
-config TRIZEPS_PXA
-	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
-	depends on UNUSED_BOARD_FILES
-
-config MACH_TRIZEPS4
-	bool "Keith und Koep Trizeps4 DIMM-Module"
-	depends on TRIZEPS_PXA
-	select PXA27x
-	select TRIZEPS_PCMCIA
-
-config MACH_TRIZEPS4WL
-	bool "Keith und Koep Trizeps4-WL DIMM-Module"
-	depends on TRIZEPS_PXA
-	select MACH_TRIZEPS4
-	select PXA27x
-	select TRIZEPS_PCMCIA
-
-choice
-	prompt "Select base board for Trizeps module"
-	depends on TRIZEPS_PXA
-
-config MACH_TRIZEPS_CONXS
-	bool "ConXS Eval Board"
-
-config MACH_TRIZEPS_UCONXS
-	bool "uConXS Eval Board"
-
-config MACH_TRIZEPS_ANY
-	bool "another Board"
-
-endchoice
-
-config ARCOM_PCMCIA
-	bool
-	help
-	  Generic option for Arcom Viper/Zeus PCMCIA
-
-config TRIZEPS_PCMCIA
-	bool
-	help
-	  Enable PCMCIA support for Trizeps modules
-
-config MACH_LOGICPD_PXA270
-	bool "LogicPD PXA270 Card Engine Development Platform"
-	depends on UNUSED_BOARD_FILES
-	select PXA27x
-
-config MACH_PCM027
-	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_PCM990_BASEBOARD
-	bool "PHYTEC PCM-990 development board"
-	depends on UNUSED_BOARD_FILES
-	depends on MACH_PCM027
-
-choice
-	prompt "display on pcm990"
-	depends on MACH_PCM990_BASEBOARD
-
-config PCM990_DISPLAY_SHARP
-	bool "sharp lq084v1dg21 stn display"
-
-config PCM990_DISPLAY_NEC
-	bool "nec nl6448bc20_18d tft display"
-
-config PCM990_DISPLAY_NONE
-	bool "no display"
-
-endchoice
-
-config MACH_COLIBRI
-	bool "Toradex Colibri PXA270"
-	depends on UNUSED_BOARD_FILES
-	select PXA27x
-
-config MACH_COLIBRI_PXA270_INCOME
-	bool "Income s.r.o. PXA270 SBC"
-	depends on UNUSED_BOARD_FILES
-	depends on MACH_COLIBRI
-	select PXA27x
-
-config MACH_COLIBRI300
-	bool "Toradex Colibri PXA300/310"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA300
-	select CPU_PXA310
-	select PXA3xx
-
-config MACH_COLIBRI320
-	bool "Toradex Colibri PXA320"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA320
-	select PXA3xx
-
-config MACH_COLIBRI_EVALBOARD
-	bool "Toradex Colibri Evaluation Carrier Board support"
-	depends on UNUSED_BOARD_FILES
-	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
-
-config MACH_VPAC270
-	bool "Voipac PXA270"
-	depends on UNUSED_BOARD_FILES
-	select HAVE_PATA_PLATFORM
-	select PXA27x
-	help
-	  PXA270 based Single Board Computer.
-
-comment "End-user Products (sorted by vendor name)"
-
-config MACH_H4700
-	bool "HP iPAQ hx4700"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_H5000
-	bool "HP iPAQ h5000"
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-
-config MACH_HIMALAYA
-	bool "HTC Himalaya Support"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA26x
-
-config MACH_MAGICIAN
-	bool "Enable HTC Magician Support"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_MIOA701
-	bool "Mitac Mio A701 Support"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a
-	  MIO A701. Currently there is only basic support
-	  for this PDA.
-
-config PXA_EZX
-	bool "Motorola EZX Platform"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_EZX_A780
-	bool "Motorola EZX A780"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E680
-	bool "Motorola EZX E680"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A1200
-	bool "Motorola EZX A1200"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A910
-	bool "Motorola EZX A910"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E6
-	bool "Motorola EZX E6"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E2
-	bool "Motorola EZX E2"
-	default y
-	depends on PXA_EZX
-
-config MACH_MP900C
-	bool "Nec Mobilepro 900/c"
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-
-config ARCH_PXA_PALM
-	bool "PXA based Palm PDAs"
-	depends on UNUSED_BOARD_FILES
-
-config MACH_PALM27X
-	bool
-
-config MACH_PALMTE2
-	bool "Palm Tungsten|E2"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
-	  handheld computer.
-
-config MACH_PALMTC
-	bool "Palm Tungsten|C"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
-	  handheld computer.
-
-config MACH_PALMT5
-	bool "Palm Tungsten|T5"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
-	  handheld computer.
-
-config MACH_PALMTX
-	bool "Palm T|X"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Palm T|X
-	  handheld computer.
-
-config MACH_PALMZ72
-	bool "Palm Zire 72"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on Palm Zire 72
-	  handheld computer.
-
-config MACH_PALMLD
-	bool "Palm LifeDrive"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Palm LifeDrive
-	  handheld computer.
-
-config PALM_TREO
-	bool
-	depends on ARCH_PXA_PALM
-
-config MACH_CENTRO
-	bool "Palm Centro 685 (GSM)"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PALM_TREO
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
-	  smartphone.
-
-config MACH_TREO680
-	bool "Palm Treo 680"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PALM_TREO
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on Palm Treo 680
-	  smartphone.
-
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 	select SHARP_PARAM
@@ -507,34 +94,6 @@ config PXA_SHARPSL_DETECT_MACH_ID
 	  the Zaurus machine ID at run-time. For latest kexec-based
 	  boot loader, this is not necessary.
 
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-	select SHARP_LOCOMO
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-	select PXA_SHARP_C7xx
-
 config MACH_AKITA
 	bool "Enable Sharp SL-1000 (Akita) Support"
 	depends on PXA_SHARPSL
@@ -556,98 +115,7 @@ config MACH_BORZOI
 	select PXA27x
 	select PXA_SHARP_Cxx00
 
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on UNUSED_BOARD_FILES
-	depends on PXA_SHARPSL
-	select PXA25x
-
-config TOSA_BT
-	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA && NET
-	select RFKILL
-	help
-	  This is a simple driver that is able to control
-	  the state of built in bluetooth chip on tosa.
-
-config TOSA_USE_EXT_KEYCODES
-	bool "Tosa keyboard: use extended keycodes"
-	depends on MACH_TOSA
-	help
-	  Say Y here to enable the tosa keyboard driver to generate extended
-	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-	  by either console keyboard driver or by Kdrive keybd driver.
-
-	  Say Y only if you know, what you are doing!
-
-config MACH_ICONTROL
-	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA320
-	select PXA3xx
-
-config ARCH_PXA_ESERIES
-	bool "PXA based Toshiba e-series PDAs"
-	depends on UNUSED_BOARD_FILES
-	select FB_W100
-	select FB
-	select PXA25x
-
-config MACH_E330
-	bool "Toshiba e330"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e330 family PDA.
-
-config MACH_E350
-	bool "Toshiba e350"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e350 family PDA.
-
-config MACH_E740
-	bool "Toshiba e740"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e740 family PDA.
-
-config MACH_E750
-	bool "Toshiba e750"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e750 family PDA.
-
-config MACH_E400
-	bool "Toshiba e400"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e400 family PDA.
-
-config MACH_E800
-	bool "Toshiba e800"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e800 family PDA.
-
-config MACH_ZIPIT2
-	bool "Zipit Z2 Handheld"
-	depends on UNUSED_BOARD_FILES
-	select PXA27x
-
 endif # ATAGS
-endmenu
 
 config PXA25x
 	bool
@@ -661,12 +129,6 @@ config PXA27x
 	help
 	  Select code specific to PXA27x variants
 
-config CPU_PXA26x
-	bool
-	select PXA25x
-	help
-	  Select code specific to PXA26x (codename Dalhart)
-
 config PXA3xx
 	bool
 	select CPU_XSC3
@@ -682,7 +144,6 @@ config CPU_PXA300
 config CPU_PXA310
 	bool
 	select CPU_PXA300
-	select PXA310_ULPI if USB_ULPI
 	help
 	  PXA310 (codename Monahans-LV)
 
@@ -692,24 +153,6 @@ config CPU_PXA320
 	help
 	  PXA320 (codename Monahans-P)
 
-config CPU_PXA930
-	bool
-	select PXA3xx
-	help
-	  PXA930 (codename Tavor-P)
-
-config CPU_PXA935
-	bool
-	select CPU_PXA930
-	help
-	  PXA935 (codename Tavor-P65)
-
-config PXA_SHARP_C7xx
-	bool
-	select SHARPSL_PM
-	help
-	  Enable support for all Sharp C7xx models
-
 config PXA_SHARP_Cxx00
 	bool
 	select SHARPSL_PM
@@ -728,16 +171,4 @@ config SHARPSL_PM_MAX1111
 	select SPI
 	select SPI_MASTER
 
-config PXA310_ULPI
-	bool
-
-config PXA_SYSTEMS_CPLDS
-	tristate "Motherboard cplds"
-	default ARCH_LUBBOCK || MACH_MAINSTONE
-	help
-	  This driver supports the Lubbock and Mainstone multifunction chip
-	  found on the pxa25x development platform system (Lubbock) and pxa27x
-	  development platform system (Mainstone). This IO board supports the
-	  interrupts handling, ethernet controller, flash chips, etc ...
-
 endif