Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 821 deletions

diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
deleted file mode 100644
index 896d47d9a8dc..000000000000
--- a/arch/arm/mach-pxa/balloon3.c
+++ /dev/null
@@ -1,821 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/balloon3.c
- *
- *  Support for Balloonboard.org Balloon3 board.
- *
- *  Author:	Nick Bane, Wookey, Jonathan McDowell
- *  Created:	June, 2006
- *  Copyright:	Toby Churchill Ltd
- *  Derived from mainstone.c, by Nico Pitre
- */
-
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/ioport.h>
-#include <linux/ucb1400.h>
-#include <linux/mtd/mtd.h>
-#include <linux/types.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/max1586.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include "balloon3.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long balloon3_pin_config[] __initdata = {
-	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Reset, configured as GPIO wakeup source */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-/******************************************************************************
- * Compatibility: Parameter parsing
- ******************************************************************************/
-static unsigned long balloon3_irq_enabled;
-
-static unsigned long balloon3_features_present =
-		(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
-		(1 << BALLOON3_FEATURE_AUDIO) |
-		(1 << BALLOON3_FEATURE_TOPPOLY);
-
-int balloon3_has(enum balloon3_features feature)
-{
-	return (balloon3_features_present & (1 << feature)) ? 1 : 0;
-}
-EXPORT_SYMBOL_GPL(balloon3_has);
-
-int __init parse_balloon3_features(char *arg)
-{
-	if (!arg)
-		return 0;
-
-	return kstrtoul(arg, 0, &balloon3_features_present);
-}
-early_param("balloon3_features", parse_balloon3_features);
-
-/******************************************************************************
- * Compact Flash slot
- ******************************************************************************/
-#if	defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-static unsigned long balloon3_cf_pin_config[] __initdata = {
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-};
-
-static void __init balloon3_cf_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_CF))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config));
-}
-#else
-static inline void balloon3_cf_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition balloon3_nor_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data balloon3_flash_data[] = {
-	{
-		.width		= 2,	/* bankwidth in bytes */
-		.parts		= balloon3_nor_partitions,
-		.nr_parts	= ARRAY_SIZE(balloon3_nor_partitions)
-	}
-};
-
-static struct resource balloon3_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device balloon3_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &balloon3_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = balloon3_flash_data,
-	},
-};
-static void __init balloon3_nor_init(void)
-{
-	platform_device_register(&balloon3_flash);
-}
-#else
-static inline void balloon3_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static unsigned long balloon3_ac97_pin_config[] __initdata = {
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
-};
-
-static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
-};
-
-
-static struct platform_device balloon3_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &vpac270_ucb1400_pdata,
-	},
-};
-
-static void __init balloon3_ts_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-	platform_device_register(&balloon3_ucb1400_device);
-}
-#else
-static inline void balloon3_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static unsigned long balloon3_lcd_pin_config[] __initdata = {
-	GPIOxx_LCD_TFT_16BPP,
-	GPIO99_GPIO,
-};
-
-static struct pxafb_mode_info balloon3_lcd_modes[] = {
-	{
-		.pixclock		= 38000,
-		.xres			= 480,
-		.yres			= 640,
-		.bpp			= 16,
-		.hsync_len		= 8,
-		.left_margin		= 8,
-		.right_margin		= 8,
-		.vsync_len		= 2,
-		.upper_margin		= 4,
-		.lower_margin		= 5,
-		.sync			= 0,
-	},
-};
-
-static struct pxafb_mach_info balloon3_lcd_screen = {
-	.modes			= balloon3_lcd_modes,
-	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void balloon3_backlight_power(int on)
-{
-	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
-}
-
-static void __init balloon3_lcd_init(void)
-{
-	int ret;
-
-	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
-
-	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
-	if (ret) {
-		pr_err("Requesting BKL-ON GPIO failed!\n");
-		goto err;
-	}
-
-	ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
-	if (ret) {
-		pr_err("Setting BKL-ON GPIO direction failed!\n");
-		goto err2;
-	}
-
-	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
-	pxa_set_fb_info(NULL, &balloon3_lcd_screen);
-	return;
-
-err2:
-	gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
-err:
-	return;
-}
-#else
-static inline void balloon3_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static unsigned long balloon3_mmc_pin_config[] __initdata = {
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-};
-
-static struct pxamci_platform_data balloon3_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static void __init balloon3_mmc_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
-	pxa_set_mci_info(&balloon3_mci_platform_data);
-}
-#else
-static inline void balloon3_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static void balloon3_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR &= ~UP2OCR_DPPUE;
-}
-
-static int balloon3_udc_is_connected(void)
-{
-	return 1;
-}
-
-static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
-	.udc_command		= balloon3_udc_command,
-	.udc_is_connected	= balloon3_udc_is_connected,
-	.gpio_pullup		= -1,
-};
-
-static void __init balloon3_udc_init(void)
-{
-	pxa_set_udc_info(&balloon3_udc_info);
-}
-#else
-static inline void balloon3_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
-	.transceiver_cap	= IR_FIRMODE | IR_SIRMODE | IR_OFF,
-};
-
-static void __init balloon3_irda_init(void)
-{
-	pxa_set_ficp_info(&balloon3_ficp_platform_data);
-}
-#else
-static inline void balloon3_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static unsigned long balloon3_uhc_pin_config[] __initdata = {
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-};
-
-static struct pxaohci_platform_data balloon3_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init balloon3_uhc_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
-		return;
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
-	pxa_set_ohci_info(&balloon3_ohci_info);
-}
-#else
-static inline void balloon3_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static unsigned long balloon3_led_pin_config[] __initdata = {
-	GPIO9_GPIO,	/* NAND activity LED */
-	GPIO10_GPIO,	/* Heartbeat LED */
-};
-
-struct gpio_led balloon3_gpio_leds[] = {
-	{
-		.name			= "balloon3:green:idle",
-		.default_trigger	= "heartbeat",
-		.gpio			= BALLOON3_GPIO_LED_IDLE,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:green:nand",
-		.default_trigger	= "nand-disk",
-		.gpio			= BALLOON3_GPIO_LED_NAND,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data balloon3_gpio_led_info = {
-	.leds		= balloon3_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
-};
-
-static struct platform_device balloon3_leds = {
-	.name	= "leds-gpio",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &balloon3_gpio_led_info,
-	}
-};
-
-struct gpio_led balloon3_pcf_gpio_leds[] = {
-	{
-		.name			= "balloon3:green:led0",
-		.gpio			= BALLOON3_PCF_GPIO_LED0,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:green:led1",
-		.gpio			= BALLOON3_PCF_GPIO_LED1,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led2",
-		.gpio			= BALLOON3_PCF_GPIO_LED2,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led3",
-		.gpio			= BALLOON3_PCF_GPIO_LED3,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led4",
-		.gpio			= BALLOON3_PCF_GPIO_LED4,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led5",
-		.gpio			= BALLOON3_PCF_GPIO_LED5,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:red:led6",
-		.gpio			= BALLOON3_PCF_GPIO_LED6,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:red:led7",
-		.gpio			= BALLOON3_PCF_GPIO_LED7,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
-	.leds		= balloon3_pcf_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_pcf_gpio_leds),
-};
-
-static struct platform_device balloon3_pcf_leds = {
-	.name	= "leds-gpio",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &balloon3_pcf_gpio_led_info,
-	}
-};
-
-static void __init balloon3_leds_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config));
-	platform_device_register(&balloon3_leds);
-	platform_device_register(&balloon3_pcf_leds);
-}
-#else
-static inline void balloon3_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * FPGA IRQ
- ******************************************************************************/
-static void balloon3_mask_irq(struct irq_data *d)
-{
-	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled &= ~(1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static void balloon3_unmask_irq(struct irq_data *d)
-{
-	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled |= (1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static struct irq_chip balloon3_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= balloon3_mask_irq,
-	.irq_mask	= balloon3_mask_irq,
-	.irq_unmask	= balloon3_unmask_irq,
-};
-
-static void balloon3_irq_handler(struct irq_desc *desc)
-{
-	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-					balloon3_irq_enabled;
-	do {
-		struct irq_data *d = irq_desc_get_irq_data(desc);
-		struct irq_chip *chip = irq_desc_get_chip(desc);
-		unsigned int irq;
-
-		/* clear useless edge notification */
-		if (chip->irq_ack)
-			chip->irq_ack(d);
-
-		while (pending) {
-			irq = BALLOON3_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-			pending &= pending - 1;
-		}
-		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-				balloon3_irq_enabled;
-	} while (pending);
-}
-
-static void __init balloon3_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-	/* setup extra Balloon3 irqs */
-	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
-		irq_set_chip_and_handler(irq, &balloon3_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-
-	irq_set_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
-	irq_set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
-
-	pr_debug("%s: chained handler installed - irq %d automatically "
-		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
-}
-
-/******************************************************************************
- * GPIO expander
- ******************************************************************************/
-#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
-static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
-	.gpio_base	= BALLOON3_PCF_GPIO_BASE,
-	.n_latch	= 0,
-	.setup		= NULL,
-	.teardown	= NULL,
-	.context	= NULL,
-};
-
-static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("pcf8574a", 0x38),
-		.platform_data	= &balloon3_pcf857x_pdata,
-	},
-};
-
-static void __init balloon3_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
-}
-#else
-static inline void balloon3_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * NAND
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void balloon3_nand_cmd_ctl(struct nand_chip *this, int cmd,
-				  unsigned int ctrl)
-{
-	uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_CLE)
-			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
-		else
-			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
-
-		if (ctrl & NAND_ALE)
-			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
-		else
-			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
-
-		if (balloon3_ctl_clr)
-			__raw_writel(balloon3_ctl_clr,
-				BALLOON3_NAND_CONTROL_REG);
-		if (balloon3_ctl_set)
-			__raw_writel(balloon3_ctl_set,
-				BALLOON3_NAND_CONTROL_REG +
-				BALLOON3_FPGA_SETnCLR);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->legacy.IO_ADDR_W);
-}
-
-static void balloon3_nand_select_chip(struct nand_chip *this, int chip)
-{
-	if (chip < 0 || chip > 3)
-		return;
-
-	/* Assert all nCE lines */
-	__raw_writew(
-		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
-		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
-
-	/* Deassert correct nCE line */
-	__raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
-		BALLOON3_NAND_CONTROL_REG);
-}
-
-static int balloon3_nand_dev_ready(struct nand_chip *this)
-{
-	return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
-}
-
-static int balloon3_nand_probe(struct platform_device *pdev)
-{
-	uint16_t ver;
-	int ret;
-
-	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
-		BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR);
-
-	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver < 0x4f08)
-		pr_warn("The FPGA code, version 0x%04x, is too old. "
-			"NAND support might be broken in this version!", ver);
-
-	/* Power up the NAND chips */
-	ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
-	if (ret)
-		goto err1;
-
-	ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
-	if (ret)
-		goto err2;
-
-	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
-
-	/* Deassert all nCE lines and write protect line */
-	__raw_writel(
-		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
-		BALLOON3_NAND_CONTROL_FLWP,
-		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
-	return 0;
-
-err2:
-	gpio_free(BALLOON3_GPIO_RUN_NAND);
-err1:
-	return ret;
-}
-
-static void balloon3_nand_remove(struct platform_device *pdev)
-{
-	/* Power down the NAND chips */
-	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
-	gpio_free(BALLOON3_GPIO_RUN_NAND);
-}
-
-static struct mtd_partition balloon3_partition_info[] = {
-	[0] = {
-		.name	= "Boot",
-		.offset	= 0,
-		.size	= SZ_4M,
-	},
-	[1] = {
-		.name	= "RootFS",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-struct platform_nand_data balloon3_nand_pdata = {
-	.chip = {
-		.nr_chips	= 4,
-		.chip_offset	= 0,
-		.nr_partitions	= ARRAY_SIZE(balloon3_partition_info),
-		.partitions	= balloon3_partition_info,
-		.chip_delay	= 50,
-	},
-	.ctrl = {
-		.dev_ready	= balloon3_nand_dev_ready,
-		.select_chip	= balloon3_nand_select_chip,
-		.cmd_ctrl	= balloon3_nand_cmd_ctl,
-		.probe		= balloon3_nand_probe,
-		.remove		= balloon3_nand_remove,
-	},
-};
-
-static struct resource balloon3_nand_resource[] = {
-	[0] = {
-		.start = BALLOON3_NAND_BASE,
-		.end   = BALLOON3_NAND_BASE + 0x4,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device balloon3_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(balloon3_nand_resource),
-	.resource	= balloon3_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &balloon3_nand_pdata,
-	}
-};
-
-static void __init balloon3_nand_init(void)
-{
-	platform_device_register(&balloon3_nand);
-}
-#else
-static inline void balloon3_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data balloon3_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= balloon3_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(balloon3_max1587a_consumers),
-};
-
-static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &balloon3_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data balloon3_max1587a_info = {
-	.subdevs     = balloon3_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &balloon3_max1587a_info,
-	},
-};
-
-static void __init balloon3_pmic_init(void)
-{
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
-}
-#else
-static inline void balloon3_pmic_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init balloon3_init(void)
-{
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	balloon3_i2c_init();
-	balloon3_irda_init();
-	balloon3_lcd_init();
-	balloon3_leds_init();
-	balloon3_mmc_init();
-	balloon3_nand_init();
-	balloon3_nor_init();
-	balloon3_pmic_init();
-	balloon3_ts_init();
-	balloon3_udc_init();
-	balloon3_uhc_init();
-	balloon3_cf_init();
-}
-
-static struct map_desc balloon3_io_desc[] __initdata = {
-	{	/* CPLD/FPGA */
-		.virtual	= (unsigned long)BALLOON3_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(BALLOON3_FPGA_PHYS),
-		.length		= BALLOON3_FPGA_LENGTH,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init balloon3_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
-}
-
-MACHINE_START(BALLOON3, "Balloon3")
-	/* Maintainer: Nick Bane. */
-	.map_io		= balloon3_map_io,
-	.nr_irqs	= BALLOON3_NR_IRQS,
-	.init_irq	= balloon3_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= balloon3_init,
-	.atag_offset	= 0x100,
-	.restart	= pxa_restart,
-MACHINE_END