Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 1001 deletions

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
deleted file mode 100644
index 2e4daeab6278..000000000000
--- a/arch/arm/mach-pxa/eseries.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- */
-
-#include <linux/clkdev.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk-provider.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tc6387xb.h>
-#include <linux/mfd/tc6393xb.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/memblock.h>
-#include <linux/gpio/machine.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "pxa25x.h"
-#include "eseries-gpio.h"
-#include "eseries-irq.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/* Only e800 has 128MB RAM */
-void __init eseries_fixup(struct tag *tags, char **cmdline)
-{
-	if (machine_is_e800())
-		memblock_add(0xa0000000, SZ_128M);
-	else
-		memblock_add(0xa0000000, SZ_64M);
-}
-
-static struct gpiod_lookup_table e7xx_gpio_vbus_gpiod_table __maybe_unused = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_DISC,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device e7xx_gpio_vbus __maybe_unused = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-struct pxaficp_platform_data e7xx_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-int eseries_tmio_enable(struct platform_device *dev)
-{
-	/* Reset - bring SUSPEND high before PCLR */
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-	msleep(1);
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
-	msleep(1);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
-	msleep(1);
-	return 0;
-}
-
-void eseries_tmio_disable(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-}
-
-int eseries_tmio_suspend(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	return 0;
-}
-
-int eseries_tmio_resume(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
-	msleep(1);
-	return 0;
-}
-
-void eseries_get_tmio_gpios(void)
-{
-	gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
-	gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
-	gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
-}
-
-/* TMIO controller uses the same resources on all e-series machines. */
-struct resource eseries_tmio_resources[] = {
-	[0] = {
-		.start  = PXA_CS4_PHYS,
-		.end    = PXA_CS4_PHYS + 0x1fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-		.end    = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-/* Some e-series hardware cannot control the 32K clock */
-static void __init __maybe_unused eseries_register_clks(void)
-{
-	clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, 0, 32768);
-}
-
-#ifdef CONFIG_MACH_E330
-/* -------------------- e330 tc6387xb parameters -------------------- */
-
-static struct tc6387xb_platform_data e330_tc6387xb_info = {
-	.enable   = &eseries_tmio_enable,
-	.suspend  = &eseries_tmio_suspend,
-	.resume   = &eseries_tmio_resume,
-};
-
-static struct platform_device e330_tc6387xb_device = {
-	.name           = "tc6387xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e330_tc6387xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* --------------------------------------------------------------- */
-
-static struct platform_device *e330_devices[] __initdata = {
-	&e330_tc6387xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e330_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
-}
-
-MACHINE_START(E330, "Toshiba e330")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e330_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E350
-/* -------------------- e350 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e350_t7l66xb_info = {
-	.irq_base               = IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e350_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e350_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *e350_devices[] __initdata = {
-	&e350_t7l66xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e350_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
-}
-
-MACHINE_START(E350, "Toshiba e350")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e350_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E400
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
-	.name = "Internal NAND flash",
-	.offset =  0,
-	.size =  MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
-	.num_partitions = 1,
-	.partition = &partition_a,
-	.badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-
-	.nand_data              = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e400_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *e400_devices[] __initdata = {
-	&e400_t7l66xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e400_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	/* Fixme - e400 may have a switched clock */
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
-}
-
-MACHINE_START(E400, "Toshiba e400")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e400_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E740
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
-	GPIO40_GPIO,  /* Mic amp power */
-	GPIO41_GPIO,  /* Headphone amp power */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e740_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct platform_device e740_audio_device = {
-	.name		= "e740-audio",
-	.id		= -1,
-};
-
-static struct gpiod_lookup_table e740_audio_gpio_table = {
-	.dev_id = "e740-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_WM9705_nAVDD2, "Audio power",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_AMP_ON, "Output amp",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_MIC_ON, "Mic amp", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *e740_devices[] __initdata = {
-	&e740_fb_device,
-	&e740_t7l66xb_device,
-	&e7xx_gpio_vbus,
-	&e740_audio_device,
-};
-
-static void __init e740_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
-			"UDCCLK", &pxa25x_device_udc.dev),
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	gpiod_add_lookup_table(&e740_audio_gpio_table);
-	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e740_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E750
-/* ---------------------- E750 LCD definitions -------------------- */
-
-static struct w100_gen_regs e750_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x00000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00fff003,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 21,
-	.right_margin    = 22,
-	.upper_margin    = 5,
-	.lower_margin    = 4,
-	.crtc_ss         = 0x80150014,
-	.crtc_ls         = 0x8014000d,
-	.crtc_gs         = 0xc1000005,
-	.crtc_vpos_gs    = 0x00020147,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa1700030,
-	.crtc_gclk       = 0x80cc0015,
-	.crtc_goe        = 0x80cc0015,
-	.crtc_ps1_active = 0x61060017,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
-	.init_data1 = 0x01192f1b,
-	.gpio_dir1  = 0xd5ffdeff,
-	.gpio_oe1   = 0x000020bf,
-	.init_data2 = 0x010f010f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
-	.modelist   = &e750_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e750_lcd_regs,
-	.gpio       = &e750_w100_gpio_info,
-	.xtal_freq  = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e750_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e750_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e750_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e750_fb_resources),
-	.resource       = e750_fb_resources,
-};
-
-/* -------------------- e750 MFP parameters -------------------- */
-
-static unsigned long e750_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO11_3_6MHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO4_GPIO,  /* Headphone amp power */
-	GPIO7_GPIO,  /* Speaker amp power */
-	GPIO37_GPIO, /* Headphone detect */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	/* GPIO11_GPIO,  IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ----------------- e750 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e750_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e750_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e750_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct gpiod_lookup_table e750_audio_gpio_table = {
-	.dev_id = "e750-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E750_HP_AMP_OFF, "Output amp",  GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E750_SPK_AMP_OFF, "Mic amp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device e750_audio_device = {
-	.name		= "e750-audio",
-	.id		= -1,
-};
-
-/* ------------------------------------------------------------- */
-
-static struct platform_device *e750_devices[] __initdata = {
-	&e750_fb_device,
-	&e750_tc6393xb_device,
-	&e7xx_gpio_vbus,
-	&e750_audio_device,
-};
-
-static void __init e750_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	gpiod_add_lookup_table(&e750_audio_gpio_table);
-	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E750, "Toshiba e750")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e750_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E800
-/* ------------------------ e800 LCD definitions ------------------------- */
-
-static unsigned long e800_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* tc6393xb */
-	GPIO11_3_6MHz,
-};
-
-static struct w100_gen_regs e800_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x02a00000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x000ff2a3,
-	.genlcd_cntl2 =          0x000002a3,
-	.genlcd_cntl3 =          0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
-	[0] = {
-		.xres            = 480,
-		.yres            = 640,
-		.left_margin     = 52,
-		.right_margin    = 148,
-		.upper_margin    = 2,
-		.lower_margin    = 6,
-		.crtc_ss         = 0x80350034,
-		.crtc_ls         = 0x802b0026,
-		.crtc_gs         = 0x80160016,
-		.crtc_vpos_gs    = 0x00020003,
-		.crtc_rev        = 0x0040001d,
-		.crtc_dclk       = 0xe0000000,
-		.crtc_gclk       = 0x82a50049,
-		.crtc_goe        = 0x80ee001c,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 128,
-		.pixclk_divider         = 4,
-		.pixclk_divider_rotated = 6,
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	},
-	[1] = {
-		.xres            = 240,
-		.yres            = 320,
-		.left_margin     = 15,
-		.right_margin    = 88,
-		.upper_margin    = 0,
-		.lower_margin    = 7,
-		.crtc_ss         = 0xd010000f,
-		.crtc_ls         = 0x80070003,
-		.crtc_gs         = 0x80000000,
-		.crtc_vpos_gs    = 0x01460147,
-		.crtc_rev        = 0x00400003,
-		.crtc_dclk       = 0xa1700030,
-		.crtc_gclk       = 0x814b0008,
-		.crtc_goe        = 0x80cc0015,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 100,
-		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
-		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	}
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
-	.init_data1 = 0xc13fc019,
-	.gpio_dir1  = 0x3e40df7f,
-	.gpio_oe1   = 0x003c3000,
-	.init_data2 = 0x00000000,
-	.gpio_dir2  = 0x00000000,
-	.gpio_oe2   = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x10001545,
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
-	unsigned long tmp;
-
-	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
-	if (par->mode->xres == 480)
-		tmp |= 0x100;
-	else
-		tmp &= ~0x100;
-	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
-	.change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
-	.modelist   = e800_lcd_mode,
-	.num_modes  = 2,
-	.regs       = &e800_lcd_regs,
-	.gpio       = &e800_w100_gpio_info,
-	.mem        = &e800_w100_mem_info,
-	.tg         = &e800_tg_info,
-	.xtal_freq  = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e800_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e800_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e800_fb_resources),
-	.resource       = e800_fb_resources,
-};
-
-/* --------------------------- UDC definitions --------------------------- */
-
-static struct gpiod_lookup_table e800_gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_DISC,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device e800_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-
-/* ----------------- e800 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e800_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e800_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e800_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct gpiod_lookup_table e800_audio_gpio_table = {
-	.dev_id = "e800-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E800_HP_AMP_OFF, "Output amp",  GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E800_SPK_AMP_ON, "Mic amp", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device e800_audio_device = {
-	.name		= "e800-audio",
-	.id		= -1,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *e800_devices[] __initdata = {
-	&e800_fb_device,
-	&e800_tc6393xb_device,
-	&e800_gpio_vbus,
-	&e800_audio_device,
-};
-
-static void __init e800_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table);
-	gpiod_add_lookup_table(&e800_audio_gpio_table);
-	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
-	pxa_set_ac97_info(NULL);
-}
-
-MACHINE_START(E800, "Toshiba e800")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e800_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif