Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 210 deletions

diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
deleted file mode 100644
index 212efe24aedb..000000000000
--- a/arch/arm/mach-pxa/h5000.c
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Hardware definitions for HP iPAQ h5xxx Handheld Computers
- *
- * Copyright 2000-2003  Hewlett-Packard Company.
- * Copyright 2002       Jamey Hicks <jamey.hicks@hp.com>
- * Copyright 2004-2005  Phil Blundell <pb@handhelds.org>
- * Copyright 2007-2008  Anton Vorontsov <cbouatmailru@gmail.com>
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-
-#include "pxa25x.h"
-#include "h5000.h"
-#include "udc.h"
-#include "smemc.h"
-
-#include "generic.h"
-
-/*
- * Flash
- */
-
-static struct mtd_partition h5000_flash0_partitions[] = {
-	{
-		.name = "bootldr",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	{
-		.name = "root",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	},
-};
-
-static struct mtd_partition h5000_flash1_partitions[] = {
-	{
-		.name = "second root",
-		.size = SZ_16M - 0x00040000,
-		.offset = 0,
-	},
-	{
-		.name = "asset",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-		.mask_flags = MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data h5000_flash0_data = {
-	.width = 4,
-	.parts = h5000_flash0_partitions,
-	.nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
-};
-
-static struct physmap_flash_data h5000_flash1_data = {
-	.width = 4,
-	.parts = h5000_flash1_partitions,
-	.nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
-};
-
-static struct resource h5000_flash0_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct resource h5000_flash1_resources = {
-	.start = PXA_CS0_PHYS + SZ_32M,
-	.end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device h5000_flash[] = {
-	{
-		.name = "physmap-flash",
-		.id = 0,
-		.resource = &h5000_flash0_resources,
-		.num_resources = 1,
-		.dev = {
-			.platform_data = &h5000_flash0_data,
-		},
-	},
-	{
-		.name = "physmap-flash",
-		.id = 1,
-		.resource = &h5000_flash1_resources,
-		.num_resources = 1,
-		.dev = {
-			.platform_data = &h5000_flash1_data,
-		},
-	},
-};
-
-/*
- * USB Device Controller
- */
-
-static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
-	.gpio_pullup = H5000_GPIO_USB_PULLUP,
-};
-
-/*
- * GPIO setup
- */
-
-static unsigned long h5000_pin_config[] __initdata = {
-	/* Crystal and Clock Signals */
-	GPIO12_32KHz,
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-};
-
-/*
- * Localbus setup:
- * CS0: Flash;
- * CS1: MediaQ chip, select 16-bit bus and vlio;
- * CS5: SAMCOP.
- */
-
-static void fix_msc(void)
-{
-	__raw_writel(0x129c24f2, MSC0);
-	__raw_writel(0x7ff424fa, MSC1);
-	__raw_writel(0x7ff47ff4, MSC2);
-
-	__raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
-}
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&h5000_flash[0],
-	&h5000_flash[1],
-};
-
-static void __init h5000_init(void)
-{
-	fix_msc();
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_udc_info(&h5000_udc_mach_info);
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-}
-
-MACHINE_START(H5400, "HP iPAQ H5000")
-	.atag_offset = 0x100,
-	.map_io = pxa25x_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa25x_init_irq,
-	.handle_irq = pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine = h5000_init,
-	.restart	= pxa_restart,
-MACHINE_END