Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 649 deletions

diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
deleted file mode 100644
index 4f0944f3b262..000000000000
--- a/arch/arm/mach-pxa/lubbock.c
+++ /dev/null
@@ -1,649 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/lubbock.c
- *
- *  Support for the Intel DBPXA250 Development Platform.
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-#include <linux/clkdev.h>
-#include <linux/gpio.h>
-#include <linux/gpio/gpio-reg.h>
-#include <linux/gpio/machine.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/major.h>
-#include <linux/fb.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/smc91x.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/pxa2xx_spi.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/hardware/sa1111.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "lubbock.h"
-#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "pm.h"
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long lubbock_pin_config[] __initdata = {
-	GPIO15_nCS_1,	/* CS1 - Flash */
-	GPIO78_nCS_2,	/* CS2 - Baseboard FGPA */
-	GPIO79_nCS_3,	/* CS3 - SMC ethernet */
-	GPIO80_nCS_4,	/* CS4 - SA1111 */
-
-	/* SSP data pins */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* LCD - 16bpp DSTN */
-	GPIOxx_LCD_DSTN_16BPP,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* SA1111 chip */
-	GPIO11_3_6MHz,
-
-	/* wakeup */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
-
-void lubbock_set_hexled(uint32_t value)
-{
-	LUB_HEXLED = value;
-}
-
-static struct gpio_chip *lubbock_misc_wr_gc;
-
-static void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
-{
-	unsigned long m = mask, v = set;
-	lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v);
-}
-
-static int lubbock_udc_is_connected(void)
-{
-	return (LUB_MISC_RD & (1 << 9)) == 0;
-}
-
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	.udc_is_connected	= lubbock_udc_is_connected,
-	// no D+ pullup; lubbock can't connect/disconnect in software
-};
-
-static struct resource lubbock_udc_resources[] = {
-	DEFINE_RES_MEM(0x40600000, 0x10000),
-	DEFINE_RES_IRQ(IRQ_USB),
-	DEFINE_RES_IRQ(LUBBOCK_USB_IRQ),
-	DEFINE_RES_IRQ(LUBBOCK_USB_DISC_IRQ),
-};
-
-/* GPIOs for SA1111 PCMCIA */
-static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = {
-	.dev_id = "1800",
-	.table = {
-		{ "sa1111", 0, "a0vpp", GPIO_ACTIVE_HIGH },
-		{ "sa1111", 1, "a1vpp", GPIO_ACTIVE_HIGH },
-		{ "sa1111", 2, "a0vcc", GPIO_ACTIVE_HIGH },
-		{ "sa1111", 3, "a1vcc", GPIO_ACTIVE_HIGH },
-		{ "lubbock", 14, "b0vcc", GPIO_ACTIVE_HIGH },
-		{ "lubbock", 15, "b1vcc", GPIO_ACTIVE_HIGH },
-		{ },
-	},
-};
-
-static void lubbock_init_pcmcia(void)
-{
-	struct clk *clk;
-
-	gpiod_add_lookup_table(&sa1111_pcmcia_gpio_table);
-
-	/* Add an alias for the SA1111 PCMCIA clock */
-	clk = clk_get_sys("pxa2xx-pcmcia", NULL);
-	if (!IS_ERR(clk)) {
-		clkdev_create(clk, NULL, "1800");
-		clk_put(clk);
-	}
-}
-
-static struct resource sa1111_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x10001fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_SA1111_IRQ,
-		.end	= LUBBOCK_SA1111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= LUBBOCK_SA1111_IRQ_BASE,
-	.disable_devs	= SA1111_DEVID_SAC,
-};
-
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-	.dev		= {
-		.platform_data	= &sa1111_info,
-	},
-};
-
-/* ADS7846 is connected through SSP ... and if your board has J5 populated,
- * you can select it to replace the ucb1400 by switching the touchscreen cable
- * (to J5) and poking board registers (as done below).  Else it's only useful
- * for the temperature sensors.
- */
-static struct pxa2xx_spi_controller pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static int lubbock_ads7846_pendown_state(void)
-{
-	/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
-	return 0;
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,		/* internal, no cap */
-	.get_pendown_state	= lubbock_ads7846_pendown_state,
-	// .x_plate_ohms		= 500,	/* GUESS! */
-	// .y_plate_ohms		= 500,	/* GUESS! */
-};
-
-static struct gpiod_lookup_table ads7846_cs_gpios = {
-	.dev_id		= "ads7846",
-	.table		= {
-		GPIO_LOOKUP("lubbock", 11, "cs", GPIO_ACTIVE_LOW),
-		{}
-	},
-};
-
-static struct pxa2xx_spi_chip ads_hw = {
-	.tx_threshold		= 1,
-	.rx_threshold		= 2,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = { {
-	.modalias	= "ads7846",
-	.platform_data	= &ads_info,
-	.controller_data = &ads_hw,
-	.irq		= LUBBOCK_BB_IRQ,
-	.max_speed_hz	= 120000 /* max sample rate at 3V */
-				* 26 /* command + data + overhead */,
-	.bus_num	= 1,
-	.chip_select	= 0,
-},
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= 0x0c000c00,
-		.end	= 0x0c0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_ETH_IRQ,
-		.end	= LUBBOCK_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= 0x0e000000,
-		.end	= 0x0e0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata lubbock_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &lubbock_smc91x_info,
-	},
-};
-
-static struct resource flash_resources[] = {
-	[0] = {
-		.start	= 0x00000000,
-		.end	= SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x04000000,
-		.end	= 0x04000000 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition lubbock_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
-		.name =		"Kernel",
-		.size =		0x00100000,
-		.offset =	0x00040000,
-	},{
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00140000
-	}
-};
-
-static struct flash_platform_data lubbock_flash_data[2] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= lubbock_partitions,
-		.nr_parts	= ARRAY_SIZE(lubbock_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device lubbock_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &lubbock_flash_data[0],
-		},
-		.resource = &flash_resources[0],
-		.num_resources = 1,
-	},
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &lubbock_flash_data[1],
-		},
-		.resource = &flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-static struct resource lubbock_cplds_resources[] = {
-	[0] = {
-		.start	= LUBBOCK_FPGA_PHYS + 0xc0,
-		.end	= LUBBOCK_FPGA_PHYS + 0xe0 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(0),
-		.end	= PXA_GPIO_TO_IRQ(0),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-	[2] = {
-		.start	= LUBBOCK_IRQ(0),
-		.end	= LUBBOCK_IRQ(6),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lubbock_cplds_device = {
-	.name		= "pxa_cplds_irqs",
-	.id		= -1,
-	.resource	= &lubbock_cplds_resources[0],
-	.num_resources	= 3,
-};
-
-
-static struct platform_device *devices[] __initdata = {
-	&sa1111_device,
-	&smc91x_device,
-	&lubbock_flash_device[0],
-	&lubbock_flash_device[1],
-	&lubbock_cplds_device,
-};
-
-static struct pxafb_mode_info sharp_lm8v31_mode = {
-	.pixclock	= 270000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 3,
-	.right_margin	= 3,
-	.vsync_len	= 1,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lm8v31 = {
-	.modes		= &sharp_lm8v31_mode,
-	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255),
-};
-
-#define	MMC_POLL_RATE		msecs_to_jiffies(1000)
-
-static irq_handler_t mmc_detect_int;
-static void *mmc_detect_int_data;
-static struct timer_list mmc_timer;
-
-static void lubbock_mmc_poll(struct timer_list *unused)
-{
-	unsigned long flags;
-
-	/* clear any previous irq state, then ... */
-	local_irq_save(flags);
-	LUB_IRQ_SET_CLR &= ~(1 << 0);
-	local_irq_restore(flags);
-
-	/* poll until mmc/sd card is removed */
-	if (LUB_IRQ_SET_CLR & (1 << 0))
-		mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
-	else {
-		(void) mmc_detect_int(LUBBOCK_SD_IRQ, mmc_detect_int_data);
-		enable_irq(LUBBOCK_SD_IRQ);
-	}
-}
-
-static irqreturn_t lubbock_detect_int(int irq, void *data)
-{
-	/* IRQ is level triggered; disable, and poll for removal */
-	disable_irq(irq);
-	mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
-
-	return mmc_detect_int(irq, data);
-}
-
-static int lubbock_mci_init(struct device *dev,
-		irq_handler_t detect_int,
-		void *data)
-{
-	/* detect card insert/eject */
-	mmc_detect_int = detect_int;
-	mmc_detect_int_data = data;
-	timer_setup(&mmc_timer, lubbock_mmc_poll, 0);
-	return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
-			   0, "lubbock-sd-detect", data);
-}
-
-static int lubbock_mci_get_ro(struct device *dev)
-{
-	return (LUB_MISC_RD & (1 << 2)) != 0;
-}
-
-static void lubbock_mci_exit(struct device *dev, void *data)
-{
-	free_irq(LUBBOCK_SD_IRQ, data);
-	del_timer_sync(&mmc_timer);
-}
-
-static struct pxamci_platform_data lubbock_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms	= 10,
-	.init 			= lubbock_mci_init,
-	.get_ro			= lubbock_mci_get_ro,
-	.exit 			= lubbock_mci_exit,
-};
-
-static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		lubbock_set_misc_wr(BIT(4), 0);
-	} else if (mode & IR_FIRMODE) {
-		lubbock_set_misc_wr(BIT(4), BIT(4));
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data lubbock_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE,
-	.transceiver_mode	= lubbock_irda_transceiver_mode,
-};
-
-static void __init lubbock_init(void)
-{
-	int flashboot = (LUB_CONF_SWITCHES & 1);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
-
-	lubbock_misc_wr_gc = gpio_reg_init(NULL, (void *)&LUB_MISC_WR,
-					   -1, 16, "lubbock", 0, LUB_MISC_WR,
-					   NULL, NULL, NULL);
-	if (IS_ERR(lubbock_misc_wr_gc)) {
-		pr_err("Lubbock: unable to register lubbock GPIOs: %ld\n",
-		       PTR_ERR(lubbock_misc_wr_gc));
-		lubbock_misc_wr_gc = NULL;
-	}
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	lubbock_init_pcmcia();
-
-	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
-	/* lubbock has two extra IRQs */
-	pxa25x_device_udc.resource = lubbock_udc_resources;
-	pxa25x_device_udc.num_resources = ARRAY_SIZE(lubbock_udc_resources);
-	pxa_set_udc_info(&udc_info);
-	pxa_set_fb_info(NULL, &sharp_lm8v31);
-	pxa_set_mci_info(&lubbock_mci_platform_data);
-	pxa_set_ficp_info(&lubbock_ficp_platform_data);
-	pxa_set_ac97_info(NULL);
-
-	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
-		(__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	/* Compensate for the nROMBT switch which swaps the flash banks */
-	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
-	       flashboot?"Flash":"ROM", flashboot);
-
-	lubbock_flash_data[flashboot^1].name = "application-flash";
-	lubbock_flash_data[flashboot].name = "boot-rom";
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	gpiod_add_lookup_table(&ads7846_cs_gpios);
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static struct map_desc lubbock_io_desc[] __initdata = {
-  	{	/* CPLD */
-		.virtual	=  LUBBOCK_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(LUBBOCK_FPGA_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init lubbock_map_io(void)
-{
-	pxa25x_map_io();
-	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
-
-	PCFR |= PCFR_OPDE;
-}
-
-/*
- * Driver for the 8 discrete LEDs available for general use:
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct lubbock_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} lubbock_leds[] = {
-	{ "lubbock:D28", "default-on", },
-	{ "lubbock:D27", "cpu0", },
-	{ "lubbock:D26", "heartbeat" },
-	{ "lubbock:D25", },
-	{ "lubbock:D24", },
-	{ "lubbock:D23", },
-	{ "lubbock:D22", },
-	{ "lubbock:D21", },
-};
-
-static void lubbock_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct lubbock_led *led = container_of(cdev,
-					 struct lubbock_led, cdev);
-	u32 reg = LUB_DISC_BLNK_LED;
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-
-	LUB_DISC_BLNK_LED = reg;
-}
-
-static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
-{
-	struct lubbock_led *led = container_of(cdev,
-					 struct lubbock_led, cdev);
-	u32 reg = LUB_DISC_BLNK_LED;
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init lubbock_leds_init(void)
-{
-	int i;
-
-	if (!machine_is_lubbock())
-		return -ENODEV;
-
-	/* All ON */
-	LUB_DISC_BLNK_LED |= 0xff;
-	for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
-		struct lubbock_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = lubbock_leds[i].name;
-		led->cdev.brightness_set = lubbock_led_set;
-		led->cdev.brightness_get = lubbock_led_get;
-		led->cdev.default_trigger = lubbock_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(lubbock_leds_init);
-#endif
-
-MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
-	/* Maintainer: MontaVista Software Inc. */
-	.map_io		= lubbock_map_io,
-	.nr_irqs	= LUBBOCK_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= lubbock_init,
-	.restart	= pxa_restart,
-MACHINE_END