Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 140 deletions

diff --git a/arch/arm/mach-pxa/mainstone.h b/arch/arm/mach-pxa/mainstone.h
deleted file mode 100644
index f116c56cf5d9..000000000000
--- a/arch/arm/mach-pxa/mainstone.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Author:	Nicolas Pitre
- *  Created:	Nov 14, 2002
- *  Copyright:	MontaVista Software Inc.
- */
-
-#ifndef ASM_ARCH_MAINSTONE_H
-#define ASM_ARCH_MAINSTONE_H
-
-#include "irqs.h"
-
-#define MST_ETH_PHYS		PXA_CS4_PHYS
-
-#define MST_FPGA_PHYS		PXA_CS2_PHYS
-#define MST_FPGA_VIRT		(0xf0000000)
-#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
-#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
-#else
-# define __MST_REG(x)		MST_P2V(x)
-#endif
-
-/* board level registers in the FPGA */
-
-#define MST_LEDDAT1		__MST_REG(0x08000010)
-#define MST_LEDDAT2		__MST_REG(0x08000014)
-#define MST_LEDCTRL		__MST_REG(0x08000040)
-#define MST_GPSWR		__MST_REG(0x08000060)
-#define MST_MSCWR1		__MST_REG(0x08000080)
-#define MST_MSCWR2		__MST_REG(0x08000084)
-#define MST_MSCWR3		__MST_REG(0x08000088)
-#define MST_MSCRD		__MST_REG(0x08000090)
-#define MST_INTMSKENA		__MST_REG(0x080000c0)
-#define MST_INTSETCLR		__MST_REG(0x080000d0)
-#define MST_PCMCIA0		__MST_REG(0x080000e0)
-#define MST_PCMCIA1		__MST_REG(0x080000e4)
-
-#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
-#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
-#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
-#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
-#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
-#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
-#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
-#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
-#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
-
-#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
-#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
-#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
-#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
-#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
-
-#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
-#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
-#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
-#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
-#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
-
-#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
-#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
-#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
-#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
-#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
-#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
-#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
-
-#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
-#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
-#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
-
-#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
-#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
-#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
-#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
-#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
-#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
-#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
-#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
-#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
-#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
-
-#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
-#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
-#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
-#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
-#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
-#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
-#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
-#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
-#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
-#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
-#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
-#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
-#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
-#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
-
-#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
-#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
-#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
-#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
-#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
-#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
-#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
-#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
-
-#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
-#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
-#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
-#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
-#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
-#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
-
-#define MST_PCMCIA_INPUTS \
-	(MST_PCMCIA_nIRQ | MST_PCMCIA_nSPKR_BVD2 | MST_PCMCIA_nSTSCHG_BVD1 | \
-	 MST_PCMCIA_nVS2 | MST_PCMCIA_nVS1 | MST_PCMCIA_nCD)
-
-/* board specific IRQs */
-#define MAINSTONE_NR_IRQS	IRQ_BOARD_START
-
-#define MAINSTONE_IRQ(x)	(MAINSTONE_NR_IRQS + (x))
-#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
-
-#endif