Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 210 deletions

diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index 0c1b91c3ac5f..01a7a8eec6e8 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -15,7 +15,6 @@ menuconfig ARCH_S3C64XX
 	select HAVE_TCM
 	select PLAT_SAMSUNG
 	select PM_GENERIC_DOMAINS if PM
-	select S3C_DEV_NAND if ATAGS
 	select S3C_GPIO_TRACK if ATAGS
 	select S3C2410_WATCHDOG
 	select SAMSUNG_ATAGS if ATAGS
@@ -54,17 +53,6 @@ config S3C64XX_SETUP_SDHCI
 	  Internal configuration for default SDHCI setup for S3C6400 and
 	  S3C6410 SoCs.
 
-config S3C64XX_DEV_ONENAND1
-	bool
-	help
-	  Compile in platform device definition for OneNAND1 controller
-
-config SAMSUNG_DEV_BACKLIGHT
-	bool
-	depends on SAMSUNG_DEV_PWM
-	help
-	  Compile in platform device definition LCD backlight with PWM Timer
-
 # platform specific device setup
 
 config S3C64XX_SETUP_I2C0
@@ -113,201 +101,6 @@ config S3C64XX_SETUP_USB_PHY
 
 # S36400 Macchine support
 
-config MACH_SMDK6400
-	bool "SMDK6400"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6400
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_HSMMC1
-	help
-	  Machine support for the Samsung SMDK6400
-
-# S3C6410 machine support
-
-config MACH_ANW6410
-	bool "A&W6410"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C_DEV_FB
-	help
-	  Machine support for the A&W6410
-
-config MACH_MINI6410
-	bool "MINI6410"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the FriendlyARM MINI6410
-
-config MACH_REAL6410
-	bool "REAL6410"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the CoreWind REAL6410
-
-config MACH_SMDK6410
-	bool "SMDK6410"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_IDE
-	select S3C64XX_SETUP_KEYPAD
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_USB_PHY
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_IDE
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
-	prompt "SMDK6410 MMC/SD slot setup"
-	depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
-	bool "Use channel 0 only"
-	depends on MACH_SMDK6410
-	help
-	  Select CON7 (channel 0) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
-	bool "Use channel 1 only"
-	depends on MACH_SMDK6410
-	help
-	  Select CON6 (channel 1) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
-	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
-	depends on MACH_SMDK6410
-	depends on I2C=y
-	select MFD_WM8350_I2C
-	select REGULATOR
-	select REGULATOR_WM8350
-	help
-	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
-	  and audio daughtercard for the Samsung SMDK6410 reference
-	  platform.  Enabling this option will build support for this
-	  module into the kernel.  The presence of the module will be
-	  detected at runtime so the resulting kernel can be used
-	  with or without the 1190-EV1 fitted.
-
-config SMDK6410_WM1192_EV1
-	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
-	depends on MACH_SMDK6410
-	depends on I2C=y
-	select MFD_WM831X
-	select MFD_WM831X_I2C
-	select REGULATOR
-	select REGULATOR_WM831X
-	help
-	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
-	  daughtercard for the Samsung SMDK6410 reference platform.
-	  Enabling this option will build support for this module into
-	  the kernel.  The presence of the daughtercard will be
-	  detected at runtime so the resulting kernel can be used
-	  with or without the 1192-EV1 fitted.
-
-config MACH_NCP
-	bool "NCP"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_I2C1
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_I2C1
-	help
-	  Machine support for the Samsung NCP
-
-config MACH_HMT
-	bool "Airgoo HMT"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C_DEV_FB
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select SAMSUNG_DEV_PWM
-	help
-	  Machine support for the Airgoo HMT
-
-config MACH_SMARTQ
-	bool
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_USB_PHY
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HWMON
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	help
-	  Shared machine support for SmartQ 5/7
-
-config MACH_SMARTQ5
-	bool "SmartQ 5"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select MACH_SMARTQ
-	help
-	  Machine support for the SmartQ 5
-
-config MACH_SMARTQ7
-	bool "SmartQ 7"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select MACH_SMARTQ
-	help
-	  Machine support for the SmartQ 7
-
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
 	depends on ATAGS
@@ -327,11 +120,8 @@ config MACH_WLF_CRAGG_6410
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
 	help