Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 112 deletions

diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
deleted file mode 100644
index 5d238d9a798e..000000000000
--- a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
+++ /dev/null
@@ -1,112 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* linux/drivers/spi/spi_s3c24xx_fiq.S
- *
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - FIQ pseudo-DMA transfer code
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#include "map.h"
-#include "regs-irq.h"
-
-#include <linux/spi/s3c24xx-fiq.h>
-
-#define S3C2410_SPTDAT           (0x10)
-#define S3C2410_SPRDAT           (0x14)
-
-	.text
-
-	@ entry to these routines is as follows, with the register names
-	@ defined in fiq.h so that they can be shared with the C files which
-	@ setup the calling registers.
-	@
-	@ fiq_rirq	The base of the IRQ registers to find S3C2410_SRCPND
-	@ fiq_rtmp	Temporary register to hold tx/rx data
-	@ fiq_rspi	The base of the SPI register block
-	@ fiq_rtx	The tx buffer pointer
-	@ fiq_rrx	The rx buffer pointer
-	@ fiq_rcount	The number of bytes to move
-
-	@ each entry starts with a word entry of how long it is
-	@ and an offset to the irq acknowledgment word
-
-ENTRY(s3c24xx_spi_fiq_rx)
-	.word	fiq_rx_end - fiq_rx_start
-	.word	fiq_rx_irq_ack - fiq_rx_start
-fiq_rx_start:
-	ldr	fiq_rtmp, fiq_rx_irq_ack
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
-	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
-	strb	fiq_rtmp, [ fiq_rrx ], #1
-
-	mov	fiq_rtmp, #0xff
-	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
-	subs	fiq_rcount, fiq_rcount, #1
-	subsne	pc, lr, #4		@@ return, still have work to do
-
-	@@ set IRQ controller so that next op will trigger IRQ
-	mov	fiq_rtmp, #0
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
-	subs	pc, lr, #4
-
-fiq_rx_irq_ack:
-	.word	0
-fiq_rx_end:
-
-ENTRY(s3c24xx_spi_fiq_txrx)
-	.word	fiq_txrx_end - fiq_txrx_start
-	.word	fiq_txrx_irq_ack - fiq_txrx_start
-fiq_txrx_start:
-
-	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
-	strb	fiq_rtmp, [ fiq_rrx ], #1
-
-	ldr	fiq_rtmp, fiq_txrx_irq_ack
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
-	ldrb	fiq_rtmp, [ fiq_rtx ], #1
-	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
-	subs	fiq_rcount, fiq_rcount, #1
-	subsne	pc, lr, #4		@@ return, still have work to do
-
-	mov	fiq_rtmp, #0
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
-	subs	pc, lr, #4
-
-fiq_txrx_irq_ack:
-	.word	0
-
-fiq_txrx_end:
-
-ENTRY(s3c24xx_spi_fiq_tx)
-	.word	fiq_tx_end - fiq_tx_start
-	.word	fiq_tx_irq_ack - fiq_tx_start
-fiq_tx_start:
-	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
-
-	ldr	fiq_rtmp, fiq_tx_irq_ack
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
-	ldrb	fiq_rtmp, [ fiq_rtx ], #1
-	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
-	subs	fiq_rcount, fiq_rcount, #1
-	subsne	pc, lr, #4		@@ return, still have work to do
-
-	mov	fiq_rtmp, #0
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
-	subs	pc, lr, #4
-
-fiq_tx_irq_ack:
-	.word	0
-
-fiq_tx_end:
-
-	.end