Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 333 deletions

diff --git a/arch/arm/mach-s3c/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c
deleted file mode 100644
index 8c10ebc38a9c..000000000000
--- a/arch/arm/mach-s3c/mach-real6410.c
+++ /dev/null
@@ -1,333 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/types.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "map.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "irqs.h"
-
-#include <linux/soc/samsung/s3c-adc.h>
-#include "cpu.h"
-#include "devs.h"
-#include "fb.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include "s3c64xx.h"
-#include "regs-modem-s3c64xx.h"
-#include "regs-srom-s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	= 0,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[1] = {
-		.hwport	= 1,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[2] = {
-		.hwport	= 2,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[3] = {
-		.hwport	= 3,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource real6410_dm9k_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
-	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
-	[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
-					| IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-static struct dm9000_plat_data real6410_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device real6410_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(real6410_dm9k_resource),
-	.resource	= real6410_dm9k_resource,
-	.dev		= {
-		.platform_data	= &real6410_dm9k_pdata,
-	},
-};
-
-static struct s3c_fb_pd_win real6410_lcd_type0_fb_win = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 480,
-	.yres		= 272,
-};
-
-static struct fb_videomode real6410_lcd_type0_timing = {
-	/* 4.3" 480x272 */
-	.left_margin	= 3,
-	.right_margin	= 2,
-	.upper_margin	= 1,
-	.lower_margin	= 1,
-	.hsync_len	= 40,
-	.vsync_len	= 1,
-};
-
-static struct s3c_fb_pd_win real6410_lcd_type1_fb_win = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode real6410_lcd_type1_timing = {
-	/* 7.0" 800x480 */
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct s3c_fb_platdata real6410_lcd_pdata[] __initdata = {
-	{
-		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-		.vtiming	= &real6410_lcd_type0_timing,
-		.win[0]		= &real6410_lcd_type0_fb_win,
-		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	}, {
-		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-		.vtiming	= &real6410_lcd_type1_timing,
-		.win[0]		= &real6410_lcd_type1_fb_win,
-		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	},
-	{ },
-};
-
-static struct mtd_partition real6410_nand_part[] = {
-	[0] = {
-		.name	= "uboot",
-		.size	= SZ_1M,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_1M,
-	},
-	[2] = {
-		.name	= "rootfs",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= SZ_1M + SZ_2M,
-	},
-};
-
-static struct s3c2410_nand_set real6410_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(real6410_nand_part),
-		.partitions	= real6410_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand real6410_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(real6410_nand_sets),
-	.sets		= real6410_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct platform_device *real6410_devices[] __initdata = {
-	&real6410_device_eth,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_fb,
-	&s3c_device_nand,
-	&s3c_device_adc,
-	&s3c_device_ohci,
-};
-
-static void __init real6410_map_io(void)
-{
-	u32 tmp;
-
-	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/*
- * real6410_features string
- *
- * 0-9 LCD configuration
- *
- */
-static char real6410_features_str[12] __initdata = "0";
-
-static int __init real6410_features_setup(char *str)
-{
-	if (str)
-		strlcpy(real6410_features_str, str,
-			sizeof(real6410_features_str));
-	return 1;
-}
-
-__setup("real6410=", real6410_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-
-struct real6410_features_t {
-	int done;
-	int lcd_index;
-};
-
-static void real6410_parse_features(
-		struct real6410_features_t *features,
-		const char *features_str)
-{
-	const char *fp = features_str;
-
-	features->done = 0;
-	features->lcd_index = 0;
-
-	while (*fp) {
-		char f = *fp++;
-
-		switch (f) {
-		case '0'...'9':	/* tft screen */
-			if (features->done & FEATURE_SCREEN) {
-				printk(KERN_INFO "REAL6410: '%c' ignored, "
-					"screen type already set\n", f);
-			} else {
-				int li = f - '0';
-				if (li >= ARRAY_SIZE(real6410_lcd_pdata))
-					printk(KERN_INFO "REAL6410: '%c' out "
-						"of range LCD mode\n", f);
-				else {
-					features->lcd_index = li;
-				}
-			}
-			features->done |= FEATURE_SCREEN;
-			break;
-		}
-	}
-}
-
-static void __init real6410_machine_init(void)
-{
-	u32 cs1;
-	struct real6410_features_t features = { 0 };
-
-	printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
-			real6410_features_str);
-
-	/* Parse the feature string */
-	real6410_parse_features(&features, real6410_features_str);
-
-	printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
-		real6410_lcd_pdata[features.lcd_index].win[0]->xres,
-		real6410_lcd_pdata[features.lcd_index].win[0]->yres);
-
-	s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
-	s3c_nand_set_platdata(&real6410_nand_info);
-	s3c64xx_ts_set_platdata(NULL);
-
-	/* configure nCS1 width to 16 bits */
-
-	cs1 = __raw_readl(S3C64XX_SROM_BW) &
-		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
-			S3C64XX_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S3C64XX_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-
-	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
-	gpio_request(S3C64XX_GPF(15), "LCD power");
-
-	platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
-}
-
-MACHINE_START(REAL6410, "REAL6410")
-	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= real6410_map_io,
-	.init_machine	= real6410_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END