Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 424 deletions

diff --git a/arch/arm/mach-s3c/mach-smartq.c b/arch/arm/mach-s3c/mach-smartq.c
deleted file mode 100644
index 5b6e7c2a85ef..000000000000
--- a/arch/arm/mach-s3c/mach-smartq.c
+++ /dev/null
@@ -1,424 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2010 Maurus Cuelenaere
-
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include "map.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "gpio-cfg.h"
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include "sdhci.h"
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include <video/platform_lcd.h>
-
-#include "s3c64xx.h"
-#include "mach-smartq.h"
-#include "regs-modem-s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-static void smartq_usb_host_powercontrol(int port, int to)
-{
-	pr_debug("%s(%d, %d)\n", __func__, port, to);
-
-	if (port == 0) {
-		gpio_set_value(S3C64XX_GPL(0), to);
-		gpio_set_value(S3C64XX_GPL(1), to);
-	}
-}
-
-static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw)
-{
-	struct s3c2410_hcd_info *info = pw;
-
-	if (gpio_get_value(S3C64XX_GPL(10)) == 0) {
-		pr_debug("%s: over-current irq (oc detected)\n", __func__);
-		s3c2410_usb_report_oc(info, 3);
-	} else {
-		pr_debug("%s: over-current irq (oc cleared)\n", __func__);
-		s3c2410_usb_report_oc(info, 0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)
-{
-	int ret;
-
-	/* This isn't present on a SmartQ 5 board */
-	if (machine_is_smartq5())
-		return;
-
-	if (on) {
-		ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)),
-				  smartq_usb_host_ocirq,
-				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				  "USB host overcurrent", info);
-		if (ret != 0)
-			pr_err("failed to request usb oc irq: %d\n", ret);
-	} else {
-		free_irq(gpio_to_irq(S3C64XX_GPL(10)), info);
-	}
-}
-
-static struct s3c2410_hcd_info smartq_usb_host_info = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED
-	},
-	.port[1]	= {
-		.flags	= 0
-	},
-
-	.power_control	= smartq_usb_host_powercontrol,
-	.enable_oc	= smartq_usb_host_enableoc,
-};
-
-static struct gpiod_lookup_table smartq_usb_otg_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("GPL", 9, "vbus", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device smartq_usb_otg_vbus_dev = {
-	.name			= "gpio-vbus",
-};
-
-static struct pwm_lookup smartq_pwm_lookup[] = {
-	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
-		   1000000000 / (1000 * 20), PWM_POLARITY_NORMAL),
-};
-
-static int smartq_bl_init(struct device *dev)
-{
-    s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
-
-    return 0;
-}
-
-static struct platform_pwm_backlight_data smartq_backlight_data = {
-	.max_brightness	= 1000,
-	.dft_brightness	= 600,
-	.init		= smartq_bl_init,
-};
-
-static struct platform_device smartq_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &samsung_device_pwm.dev,
-		.platform_data = &smartq_backlight_data,
-	},
-};
-
-static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = {
-	.delay			= 65535,
-	.presc			= 99,
-	.oversampling_shift	= 4,
-};
-
-static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-};
-
-static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
-	/* Battery voltage (?-4.2V) */
-	.in[0] = &(struct s3c_hwmon_chcfg) {
-		.name		= "smartq:battery-voltage",
-		.mult		= 3300,
-		.div		= 2048,
-	},
-	/* Reference voltage (1.2V) */
-	.in[1] = &(struct s3c_hwmon_chcfg) {
-		.name		= "smartq:reference-voltage",
-		.mult		= 3300,
-		.div		= 4096,
-	},
-};
-
-static struct dwc2_hsotg_plat smartq_hsotg_pdata;
-
-static int __init smartq_lcd_setup_gpio(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPM(3), "LCD power");
-	if (ret < 0)
-		return ret;
-
-	/* turn power off */
-	gpio_direction_output(S3C64XX_GPM(3), 0);
-
-	return 0;
-}
-
-/* GPM0 -> CS */
-static struct spi_gpio_platform_data smartq_lcd_control = {
-	.num_chipselect	= 1,
-};
-
-static struct platform_device smartq_lcd_control_device = {
-	.name			= "spi_gpio",
-	.id			= 1,
-	.dev.platform_data	= &smartq_lcd_control,
-};
-
-static struct gpiod_lookup_table smartq_lcd_control_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("GPIOM", 1,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOM", 2,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOM", 3,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOM", 0,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
-	gpio_direction_output(S3C64XX_GPM(3), power);
-}
-
-static struct plat_lcd_data smartq_lcd_power_data = {
-	.set_power	= smartq_lcd_power_set,
-};
-
-static struct platform_device smartq_lcd_power_device = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smartq_lcd_power_data,
-};
-
-static struct i2c_board_info smartq_i2c_devs[] __initdata = {
-	{ I2C_BOARD_INFO("wm8987", 0x1a), },
-};
-
-static struct platform_device *smartq_devices[] __initdata = {
-	&s3c_device_hsmmc1,	/* Init iNAND first, ... */
-	&s3c_device_hsmmc0,	/* ... then the external SD card */
-	&s3c_device_hsmmc2,
-	&s3c_device_adc,
-	&s3c_device_fb,
-	&s3c_device_hwmon,
-	&s3c_device_i2c0,
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&samsung_device_pwm,
-	&s3c_device_usb_hsotg,
-	&s3c64xx_device_iis0,
-	&smartq_backlight_device,
-	&smartq_lcd_control_device,
-	&smartq_lcd_power_device,
-	&smartq_usb_otg_vbus_dev,
-};
-
-static void __init smartq_lcd_mode_set(void)
-{
-	u32 tmp;
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-static void smartq_power_off(void)
-{
-	gpio_direction_output(S3C64XX_GPK(15), 1);
-}
-
-static int __init smartq_power_off_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPK(15), "Power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPK15\n", __func__);
-		return ret;
-	}
-
-	/* leave power on */
-	gpio_direction_output(S3C64XX_GPK(15), 0);
-
-	pm_power_off = smartq_power_off;
-
-	return ret;
-}
-
-static int __init smartq_usb_host_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPL(0), "USB power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPL0\n", __func__);
-		return ret;
-	}
-
-	ret = gpio_request(S3C64XX_GPL(1), "USB host power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPL1\n", __func__);
-		goto err;
-	}
-
-	if (!machine_is_smartq5()) {
-		/* This isn't present on a SmartQ 5 board */
-		ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent");
-		if (ret < 0) {
-			pr_err("%s: failed to get GPL10\n", __func__);
-			goto err2;
-		}
-	}
-
-	/* turn power off */
-	gpio_direction_output(S3C64XX_GPL(0), 0);
-	gpio_direction_output(S3C64XX_GPL(1), 0);
-	if (!machine_is_smartq5())
-		gpio_direction_input(S3C64XX_GPL(10));
-
-	s3c_device_ohci.dev.platform_data = &smartq_usb_host_info;
-
-	return 0;
-
-err2:
-	gpio_free(S3C64XX_GPL(1));
-err:
-	gpio_free(S3C64XX_GPL(0));
-	return ret;
-}
-
-static int __init smartq_wifi_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPK(1), "wifi control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPK1\n", __func__);
-		return ret;
-	}
-
-	ret = gpio_request(S3C64XX_GPK(2), "wifi reset");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPK2\n", __func__);
-		gpio_free(S3C64XX_GPK(1));
-		return ret;
-	}
-
-	/* turn power on */
-	gpio_direction_output(S3C64XX_GPK(1), 1);
-
-	/* reset device */
-	gpio_direction_output(S3C64XX_GPK(2), 0);
-	mdelay(100);
-	gpio_set_value(S3C64XX_GPK(2), 1);
-	gpio_direction_input(S3C64XX_GPK(2));
-
-	return 0;
-}
-
-static struct map_desc smartq_iodesc[] __initdata = {};
-void __init smartq_map_io(void)
-{
-	s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c64xx_set_xusbxti_freq(12000000);
-	s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-
-	smartq_lcd_mode_set();
-}
-
-static struct gpiod_lookup_table smartq_audio_gpios = {
-	.dev_id = "smartq-audio",
-	.table = {
-		GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
-		GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
-		{ },
-	},
-};
-
-void __init smartq_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	dwc2_hsotg_set_platdata(&smartq_hsotg_pdata);
-	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
-	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
-	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
-	s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata);
-
-	i2c_register_board_info(0, smartq_i2c_devs,
-				ARRAY_SIZE(smartq_i2c_devs));
-
-	WARN_ON(smartq_lcd_setup_gpio());
-	WARN_ON(smartq_power_off_init());
-	WARN_ON(smartq_usb_host_init());
-	WARN_ON(smartq_wifi_init());
-
-	pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
-	gpiod_add_lookup_table(&smartq_lcd_control_gpiod_table);
-	gpiod_add_lookup_table(&smartq_usb_otg_vbus_gpiod_table);
-	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
-
-	gpiod_add_lookup_table(&smartq_audio_gpios);
-	platform_device_register_simple("smartq-audio", -1, NULL, 0);
-}