Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 157 deletions

diff --git a/arch/arm/mach-s3c/mach-tct_hammer.c b/arch/arm/mach-s3c/mach-tct_hammer.c
deleted file mode 100644
index 93ab1abd8bd3..000000000000
--- a/arch/arm/mach-s3c/mach-tct_hammer.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2007 TinCanTools
-//	David Anders <danders@amltd.com>
-//
-// @History:
-// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "devs.h"
-#include "cpu.h"
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-
-#include "s3c24xx.h"
-
-static struct resource tct_hammer_nor_resource =
-			DEFINE_RES_MEM(0x00000000, SZ_16M);
-
-static struct mtd_partition tct_hammer_mtd_partitions[] = {
-	{
-		.name		= "System",
-		.size		= 0x240000,
-		.offset		= 0,
-		.mask_flags 	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "JFFS2",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data tct_hammer_flash_data = {
-	.width		= 2,
-	.parts		= tct_hammer_mtd_partitions,
-	.nr_parts	= ARRAY_SIZE(tct_hammer_mtd_partitions),
-};
-
-static struct platform_device tct_hammer_device_nor = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-			.platform_data = &tct_hammer_flash_data,
-		},
-	.num_resources	= 1,
-	.resource	= &tct_hammer_nor_resource,
-};
-
-static struct map_desc tct_hammer_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-static struct gpiod_lookup_table tct_hammer_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device *tct_hammer_devices[] __initdata = {
-	&s3c_device_adc,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&s3c_device_sdi,
-	&tct_hammer_device_nor,
-};
-
-static void __init tct_hammer_map_io(void)
-{
-	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
-	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init tct_hammer_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init tct_hammer_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	gpiod_add_lookup_table(&tct_hammer_mmc_gpio_table);
-	platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
-}
-
-MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= tct_hammer_map_io,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= tct_hammer_init,
-	.init_time	= tct_hammer_init_time,
-MACHINE_END