arm64: dts: freescale: Rename DTB overlay source files from .dts to .dtso

DTB Overlays (.dtbo) can now be built from source files with the
extension (.dtso). This makes it clear what is the content of the files
and differentiates them from base DTB source files.

Convert the DTB overlay source files in the arm64/freescale directory.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

1 files changed, 69 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso
new file mode 100644
index 000000000000..1dff68d7484b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 7777
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing
+ * disabled, plugged in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 4 ports on AQR412 */
+	slot1_sxgmii0: ethernet-phy@0 {
+		reg = <0x0>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot1_sxgmii1: ethernet-phy@1 {
+		reg = <0x1>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot1_sxgmii2: ethernet-phy@2 {
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot1_sxgmii3: ethernet-phy@3 {
+		reg = <0x3>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii0>;
+		phy-mode = "2500base-x";
+	};
+
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii1>;
+		phy-mode = "2500base-x";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii2>;
+		phy-mode = "2500base-x";
+	};
+
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii3>;
+		phy-mode = "2500base-x";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};